ION Acadia Speaker User Guide
- June 6, 2024
- ION
Table of Contents
ION Acadia Speaker
For the full User Guide and the latest information about this product, visit ionaudio.com. For additional product support, visit ionaudio.com/support. For complete warranty information: visit ionaudio.com/warranty.
Box Contents
Acadia™
| Micro-USB Cable (12″ / 30 cm)|
Quickstart Guide
---|---|---
Note: Before you first use the product, please fully charge the battery.
Your unit was purposely shipped with a reduced battery charge to ensure safe
transit. For optimal charging, power off the speaker while charging.
Features
Top Pane
| Power Button: Press and hold to turn Acadia™ on and off
Note: Acadia™ will automatically power off after 15 minutes if no audio
is playing.
---|---
| Bluetooth Button: Press and hold to disconnect a Bluetooth device.
Double-press to enter Acadia™ Multi-Sync™ mode.
See Bluetooth Connecting with Acadia™ to learn how to connect via
Bluetooth and sync multiple Acadia™ speakers.
| Bass Boost Button: Press this button to enhance the overall bass
frequency response.
| Radio Button: Press this button enter FM radio mode.
|
Volume Buttons: Press these buttons to decrease or increase the speaker
volume.
|
Tune/Track Buttons: Press these buttons to tune in a radio station or go
to the previous/next track on a Bluetooth connected device. To “seek” (jump to
the next available radio station) in radio mode, hold either button down for a
few seconds.
| Play/Pause Button: Press this button to play or pause on a connected
Bluetooth device. When Bluetooth connected, press and release this button to
answer a phone call. To reject an incoming call, press and hold this button.
To end the call, press this button again.
Rear Panel
A. Aux In: This stereo 1/8” (3.5 mm) input can be used to connect a CD
player, MP3 player, or other audio source.
B. USB Device Charging Port (5V, 1A): Connect your device’s charge
cable here to charge it.
USB charging only functions when the unit’s power is turned on.
Note: You may experience some noise when charging certain devices while
also using the aux input.
C. Lights Button: Press this button to cycle between light modes.
D. Micro-USB Speaker Charging Port: For fastest charging, power off
Acadia™ and use the included micro-USB cable to connect the speaker to (A)
a USB power adapter (DC 5V, included) connected to a power outlet, or (B)
your computer (powered on). A solid red LED will appear next to the power
button to indicate that the speaker is charging. When charging is complete,
the red LED will turn off.
App Control
IMPORTANT: To ensure the best possible experience with the app, use the
most current Android OS or iOS on your device.
Note: Ensure that your device has internet access via your service
provider or wireless connection. You can also download the app on your
computer, but remember to connect and sync your device to transfer the app.
Follow these steps to download the free app on your device:
- Open the Apple App Store or Google Play on your device. Then, search for the ION Sound XP™ app.
- Follow the on-screen instructions to download and install the app. Once downloaded, the ION Sound XP™ app will appear on your device’s home screen.
- Connect your device to Acadia™ via Bluetooth. See the Bluetooth Connecting with Acadia™ to learn how to do this.
- Open the ION Sound XP™ app and tap to select Add A Product on the screen. The app will scan and find Acadia™.
- Select the Acadia™ icon to go to the next screen, where you can control the speaker settings from your device.
For complete instructions on using the app, download the complete User Guide at ionaudio.com.
Bluetooth Connecting with Acadia™
Connecting to one Acadia™ speaker:
-
Power on the Acadia™ Speaker by holding down the Power button for 2 seconds. Acadia™ will automatically enter Bluetooth pairing mode.
-
Navigate to your device’s Bluetooth setup screen, find Acadia, and connect. When connected, the Bluetooth LED will be lit solid blue and you will hear “Connected”.
_ Note: Do not connect to AcadiaBLE; this is reserved exclusively for connecting to the ION Sound XP™ app. If you experience trouble in connecting, select “Forget this Device” on your Bluetooth device and try to connect again. -
To disconnect, turn off Bluetooth from your device’s Bluetooth settings, or press and hold the Bluetooth button.
Syncing multiple Acadia™ speakers:
-
Connect to one Acadia™ speaker using the steps above. This will be the “primary” speaker.
-
Double-press the Bluetooth button on the primary speaker to enter Multi-Sync™ mode. The Bluetooth LED will change from blue to solid white to indicate it is in Multi-Sync™ mode.
Note: Acadia™ speakers should be within 100′ (30 m) of each other to properly sync. The closer the speakers are, the faster they will sync.
Note: To exit Multi-Sync™ mode, double-press the Bluetooth button again. -
Power on any other speakers. Press and hold the Bluetooth button on the secondary speakers to disconnect any currently connected Bluetooth sources.
-
Double-press the Bluetooth button to enter Multi-Sync™ Mode for the secondary speakers. The Bluetooth LED will begin flashing green and the secondary speakers should automatically sync to the primary speakers.
-
Once a successful sync is established, the Bluetooth LED on the secondary speaker will be lit solid green, and you will hear “Synced” from the “secondary” speaker.
Note: The Bluetooth range will be determined by the distance that your Bluetooth device is to the “primary” speaker. See Technical Specifications for Bluetooth and Multi-Sync™ ranges.
Tip: Acadia™ can sync audio with other Multi-Sync™-compatible ION Audio speakers. To find out more, visit ionaudio.com.
Outdoor Use and Care
Though Acadia™ is water-resistant and able to tolerate splashing water, please review these tips to get the best performance from Acadia™: Bring Acadia™ indoors during extreme cold, heavy rain, or melting snow. Please do not place Acadia™ in standing water. Please do not connect the charging adapter to Acadia™ in a wet environment. Keep any non-water-resistant devices (phones, music players, etc.) in a dry place where they will not be affected by water and cause a risk of electric shock. Make sure the charging port door is securely closed when using outdoors to ensure the IP67 rating.
Safety Information
Important Safety Instructions
-
Read these instructions. Keep these instructions. Heed all warnings. Follow all Instructions.
-
Do not use this apparatus near water.
-
Do not block any ventilation openings (if applicable). Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.
-
Do not defeat the safety purpose of the polarized or grounding-type plug (if applicable). A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachment/accessories specified by the manufacturer.
-
Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus (if applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.
-
Power Sources (if applicable): This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
-
Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposed to excessive heat such as sunshine, fire, etc.
-
(If applicable) Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
-
Warning (if applicable): Provide an earthing connection before the mains plug is connected to the mains. When disconnecting the earthing connection, be sure to disconnect it after pulling the mains plug out from the mains.
-
For Class II apparatus only (if applicable): This symbol means the equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. -
Class II Wiring (if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with “Class II Wiring” requires Class II wiring installed by an instructed person or the use of ready-made leads or cords.
-
This apparatus is for professional use only. Intended operational climate: moderate.
-
(If applicable) When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord.
Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer. -
Warning (if applicable): Excessive sound pressure (high volumes) from headphones can cause hearing loss.
-
Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.
-
Warning (if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to constitute a risk of electric shock.
-
Minimum distances 10 mm around the apparatus for sufficient ventilation.
Safety Notices
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER.
NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL ONLY.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the
equilateral triangle is intended to alert the user to the presence of un-
insulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
INSTRUCTIONS: The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying this
appliance.
WARNING: To reduce the risk of fire or electrical shock, do not expose
this appliance to rain or moisture. Electrical equipment should NEVER be kept
or stored in damp environments.
NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or
modifications not expressly approved by the part responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: (a) reorient or relocate the receiving antenna; (b) move
this unit; (c) increase the separation between the equipment and receiver; (d)
connect the equipment into an outlet on a circuit different from that to which
the receiver is connected; (e) be sure that all cables are properly shielded,
using a choke or ferrite where appropriate; (f) consult the dealer or an
experienced radio/television technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 cm
between the radiator and your body.
If apparatus contains a coin/button-cell battery: Warning: Do not ingest
the battery–chemical burn hazard. The remote control supplied with this
product contains a coin/button-cell battery. If the coin/button-cell battery
is swallowed, it can cause severe internal burns in just 2 hours and can lead
to death. Keep new and used batteries away from children. If the battery
compartment does not close securely, stop using the product and keep it away
from children. If you think batteries might have been swallowed or placed
inside any part of the body, seek immediate medical attention.
Disposal of Batteries (if applicable):
-
Never dispose of any types of batteries in fire or near excessive heat or direct sunlight. Overheated batteries can rupture or explode.
-
If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc.
-
Alkaline batteries & lithium button cell batteries: You can safely dispose of alkaline and lithium button cell batteries with normal household waste.
They do not pose a health or environmental risk during normal use or disposal. (Alkaline batteries are composed primarily of common metals like steel, zinc, and manganese.)
Do not dispose of large amounts of alkaline or lithium button cell batteries in a group. Used batteries are often not completely “dead.” Grouping them together can bring these “live” batteries into contact with one another, creating safety risks. To avoid this, insulate each battery with tape or other nonconductive material to ensure it does not discharge. Proven cost-effective and environmentally safe recycling processes are not yet universally available for alkaline and lithium button cell batteries. Some communities offer recycling or collection of these batteries. For more information, refer to your local ordinances or contact your local government. -
Lead-acid batteries: Dispose of lead-acid batteries by bringing them to an electronic waste center or recycling center, or dispose of them in accordance with your local ordinances. (Rechargeable lead-acid batteries are the same type used in automobiles and should be disposed of in a similar fashion.)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development (ISED) Canada’s licence exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20 cm between the radiator & your body.
Service Instructions
- Disconnect power cord before servicing.
- Replace critical components only with factory parts or recommended equivalents.
- For AC line powered units: Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades to all exposed metal parts. The resistance should be more than 2,000,000 ohms.
Trademarks and Licenses
ION Audio is a trademark of in Music Brands, Inc., registered in the U.S. and other countries. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play are registered trademarks of Google Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. All other product names, company names, trademarks, or trade names are those of their respective owners.
Technical Specifications
| Output Power | 60 W (peak) |
|---|---|
| Frequency Response | 90 Hz – 20 KHz |
Bluetooth
Profile| A2DP
Range| Up to 100 ft. (30 m) from source device. (Bluetooth range is
affected by walls, obstructions, and movement. For optimal performance, place
the product so it is unobstructed by walls or furniture and is raised off the
ground.)
Multi-Sync™ Range| Up to 100 ft. (30 m) between speakers.
Specifications are subject to change without notice.
Water Resistance Class| IP67
Battery| Built-in rechargeable 7.4V, 2000 mAh lithium polymer battery
Battery Life| Up to 15 hours (Battery performance varies with the
features being used on the unit and volume at which content is being played.
In typical usage for audio playback, exclusive of additional features, the
Acadia battery lasts up to 15 hours.)
Recharge Time| Up to 5 Hours
Dimensions| (WxDxH): 7.9″x 7.8″ x 13.8″ (202.7 x 200 x 352 mm)
Weight| 7.65 lbs (3.47 kg
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>