TELTONIKA TSW110 Unmanaged Switch User Guide
- June 6, 2024
- teltonika
Table of Contents
TSW110
Quick Start Guide v1.1
Wiki knowledge base
https://wiki.teltonika-networks.com/
FRONT VIEW
BACK VIEW
POWER SOCKET PINOUT
RJ45 LED MEANING
TECHNICAL INFORMATION
Technical specifications
Input voltage range| 9 – 30 VDC
Max power consumption| <1.8 W
**Bundled accessories specifications***
Power adapter| Input 0.4 A @100-240 VAC, Output 9 VDC, 1 A, 4 pin plug
- Order code dependent.
HARDWARE INSTALLATION
- Connect your main internet router/modem to TSW110 LAN port number 1.
- Connect end devices (ex. Industrial PC, printers, IP phones, laptops) to TSW110 2 to 5 port.
- Connect 4 pin power plug to TSW110 to power up switch.
SAFETY INFORMATION
TSW110 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
Hereby, TELTONIKA NETWORKS declares that this TSW110 is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU and 2014/35/EU.
The full text of the EU declaration of conformity is available at the following Internet address: https://wiki.teltonika- networks.com/view/TSW110_CE
This sign means that all used electronic and electric equipment should not be
mixed with general household waste.
This sign means that the product meets the requirements of the applicable EU
directives.
www.teltonika-networks.com
©2020 Teltonika Networks
Documents / Resources
|
TELTONIKA TSW110 Unmanaged
Switch
[pdf] User Guide
TSW110, Unmanaged Switch
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>