GRANDSTREAM GSC3615 FHD Infrared Weatherproof IP Box Camera Installation Guide
- June 6, 2024
- GRANDSTREAM
Table of Contents
GSC3615
FHD Infrared Weatherproof
IP Box Camera
Quick Installation Guide
OVERVIEW
The GSC3615 is a high-definition, weatherproof, Infrared (IR) IP box camera, ideal for monitoring in environments such as homes, offices, banks, hotels, retail, warehouses, and building entrances. The GSC3615 integrates with Grandstream’s free management utility software GSURF Pro, allowing video feeds as well as the device itself to be fully managed by this software, along with other ONVIF-compliant video management systems. Powered by an advanced Image Sensor Processor (ISP) and state-of-the-art image algorithms, the GSC3615 delivers 1080p FHD video resolution and offers exceptional H.264/H.265 performance with HTTP API for 3rd party redevelopment. It features SIP/VoIP technology with 2-way audio and video streaming feeds loaded directly to smartphones or SIP endpoints. The GSC3615 is equipped with integrated PoE for seamless installation, IR LEDs, and interfaces for external microphones and speakers. The combination of the GSC3615, Grandstream’s GSC3570 intercom phone, GXP/GRP IP phones, GXV video phones, portable WP Wi-Fi phones, and GS- Wave Mobile APP provides a complete end-to-end solution for video intercom, security monitoring, and recording needs.
PRECAUTIONS
- Do not attempt to open, disassemble, or modify the device.
- Do not expose this device to the temperature outside the range of -20 °C to 50°C and environment humidity more than 95% (non-condensing)
- Please install the camera correctly for a smooth operation.
PACKAGE CONTENTS
POWERING AND CONNECTING THE GSC3615
The GSC3615 can be powered either using the right PSU (DC12V, 1A) or using a PoE switch, please refer to the illustration below to do the wiring and connect the waterproof RJ45 socket:
Option A (Recommended)
Step 1: Based on T-568B to install the RJ45 plug, tighten the connector
using the provided waterproof socket.
Step 2: Connect another end of the cable into a switch supporting Power
over Ethernet.
Option B
Step 1: Wire the cable and connect it to a network switch like steps in
Option A.
Step 2: Connect a 12VDC, 1A (minimum) Power Adapter (not provided) to the
power socket of the GSC3615 tail cable. Make sure the polarity “+” (center)
and “-” (outside) are correctly connected.
MOUNTING GSC3615
Step 1: Use supplied drill template to drill holes at the ceiling. Select
appropriate anchors or screws based on ceiling material. Insert the anchors if
necessary.
Step 2:
Place the cable into the groove of the camera mounting base, mount the base at
the wall using provided screws as shown in the below diagram. Leave the
connectors of cable dangling outside the cover.
Step 3:
Use the provided hex key to lose the fix screw, rotate and adjust the camera
to the appropriate angle and position.
Step 4:
Hold the body of the camera and align to the notch as shown in the diagram,
then push the body of the camera into the cover of the camera already mounted
at the ceiling.
GSC3615 CONFIGURATION
Following are the requirements to configure the GSC3615:
- Internet Browser like Firefox, Chrome, Microsoft Internet Explorer or Edge.
- DHCP server enabled on the network.
Follow the steps below to access the GSC3615 WEB configuration page:
-
Download and install the GS_Search tool from the link below: http://www.grandstream.com/products/tools/surveillance/GS_Search.zip
-
Run the Grandstream GS_Search tool.
-
Click on the button to start device detection.
-
The detected devices will appear in the output field as below.
-
Double click on the detected device. The default browser (Chrome in this example) will open to display the camera’s login web interface.
-
Username and password are required to log in to the camera to manage the device. The default username is “admin”; the default password is a random password printed in a sticker which can be found in the camera body and back of the QIG.
-
The default connection is via HTTPS. Once input the correct username and password, the device configuration webpage will be available.
-
Click the “LiveView” tab on the up left corner of the web UI, then click the “1” or “2” digit at the left bottom of the webpage, a live video feeds will be displayed inside the Browser after a while, as shown in the above screenshot. “1” means feeds is a primary video stream, “2” means feeds is a secondary video stream. Please refer to “Video & Audio Settings” in the web UI for more detailed information about the configuration and parameters.
The GNU GPL license terms are incorporated into the device firmware and can be
accessed via the Web user interface of the device at
my_device_ip/gpl_license. it can also be accessed here:
http://www.grandstream.com/legal/open-source-
software
To obtain a CD with GPL source code information please submit a written
request to info@grandstream.com
Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
This product is covered by one or more of the U.S. patents (and any foreign
patent counterparts thereto) identified at
www.cmspatents.com.
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : +1 (617) 566 – 9300
Fax: +1 (617) 249 – 1987
www.grandstream.com
For Warranty and RMA information, please visit
www.grandstream.com
References
- Grandstream Networks - Networking & Unified Communications
- cmspatents.com
- Grandstream Networks - Networking & Unified Communications
- Open Source Software
- Products | Grandstream Networks
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>