HAMPTON BAY 4183 RT Wickford 1-Light Outdoor Pendant User Guide
- June 3, 2024
- HAMPTON BAY
Table of Contents
- HAMPTON BAY 4183 RT Wickford 1-Light Outdoor Pendant
- Safety Information
- Warranty
- Pre-Installation
- TOOLS REQUIRED
- HARDWARE INCLUDED
- PACKAGE CONTENTS
- Installation
- Making the electrical connections
- Securing the light fixture
- Installing the light bulb
- Operation
- Care and Cleaning
- Troubleshooting
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HAMPTON BAY 4183 RT Wickford 1-Light Outdoor Pendant
THANK YOU
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
Safety Information
- Consult a qualified electrician if you have any electrical questions.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at 1-855-HD-HAMPTON.
WARNING: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for a period of three (3) years from date of
purchase. This warranty applies only to the original consumer purchaser and
only to products used in normal use and service. If this product is found to
be defective, the manufacturer’s only obligation, and your exclusive remedy,
is the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect, or mishandling. This warranty
shall not apply to any product that is found to have been improperly
installed, set-
up, or used in any way not in accordance with the instructions supplied with
the product. This warranty shall not apply to a failure of the product as a
result of an accident, misuse, abuse, negligence, alteration, faulty
installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear
and tear. The manufacturer does not warrant and specially disclaims any
warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically
disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor / expense
costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit
www.hamptonbay.com.
Pre-Installation
PLANNING INSTALLATION
- Read all instructions before installation.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
- Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | Mounting unit | 1 |
| BB | Mounting screw | 2 |
| CC | Wire nut | 3 |
Pre-Installation (continued)
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Light fixture | 1 |
| B | Canopy | 1 |
| C | Chain (w/ quick connector) | 1 |
Installation
Secure the light fixture
- Attach the mounting unit (AA) to the junction box (not included) with the mounting screws (BB) and remove the pre-installed screw collar ring.
- Place the canopy (B) over the pre-installed screw collar loop on the mounting unit (AA). Turn the screw collar ring until 1/2 of the screw collar loop threads are exposed.
- Secure the chain (C) to the screw collar loop on the Lower the screw collar ring and canopy (B) over the chain (C).
eave the electrical wires, ground wires through the chain (C),canopy (B) and the center of the mounting unit (AA).
NOTE: Ensure the quick connector is fully closed when installing the chain.
Making the electrical connections
- Connect the coper wire from the light fixute, A to the mounting unit (AA) by securing it with the preinstalled ground screw.
- Connect the black to black (power), the white to white (neutral) and copper wire to ground wire with the wire
NOTE: color,attach the smooth wire with H markings or letters to the black (positive) wire and the ribbed wire with N markings or letters to the white (neutral) wire.
Securing the light fixture
Secure the canopy (D) to the mounting unit (AA) with the screw collar ring.
Installing the light bulb
Install one E26 100-watt bulb (not included).
Operation
TURNING THE LIGHT ON
- Turn the light switch on to activate the fixture.
Care and Cleaning
- Clean the lamp with a soft, dry cloth.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| The bulb will not light. | The bulb is burned out. | Replace the light bulb. |
| The power is off. | Ensure the power supply is On. | |
| There is a faulty wire connection. | Check the wiring. | |
| The circuit breaker is off. | Ensure the circuit breaker is in the On position. | |
| The fuse blows or circuit breaker trips when the light is turned on. | There | |
| are crossed wires or the power wire is grounding out. | Check the wire |
connections.
Contact a qualified electrician or call the Customer Service Team at 1-855-HD- HAMPTON.