HAMPTON BAY 65143 3 Light Flush Mount User Guide

Item #1006 358 122
Model #65143
USE AND CARE GUIDE
3-LIGHT FLUSH MOUNT

65143 3 Light Flush Mount

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Safety Information

IMPORTANT SAFETY INSTRUCTIONS
Review these basic electrical guidelines before you begin this installation.

• Use tools with insulated handles and ladders made of wood or fiberglass.
• Keep dry-chemical fire extinguishers in the kitchen, basement, and workshop.
• Never disable grounding devices. Ensure all appliances that require grounding are properly grounded.
• Meet or exceed all electrical code requirements that cover the work you are doing.
• Always work with enough light to see what you are doing. It is easy to make a mistake when you work in dim light
• When in doubt about the safety of any electrical repair or test, call in a professional.

WARNING: Before touching any wire, use a voltage tester to ensure It is not live.
WARNING: When you check for voltage in a receptacle, check both outlets as each may be controlled by a separate wiring circuit
WARNING: Before working on a circuit, go to the main service panel and remove the fuse or trip the breaker that controls the circuit
WARNING: When replacing fuses, turn off the main power first. Make sure your hands and feet are dry, and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch a plug fuse only by Its insulated rim. Remove cartridge fuses with a fuse Impeller.
WARNING: Consult a qualified electrician to ensure correct branch circuit conductor.
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Warranty

3-YEAR LIMITED WARRANTY
The manufacturer warrants this lighting fixture against defects in materials and workmanship for a period of three years from the date of purchase. If within this period the product is found to be defective in material or workmanship, the product must be returned, with a copy of the bill of sale as proof of purchase, to the original place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase price to the original purchaser or consumer. This warranty does not cover light bulbs or the fixture becoming damaged due to misuse, accidental damage, improper handling and/or installation, and specially excludes liability for direct, incidental, or consequential damages. As some states do not allow exclusions or limitations on an implied warranty, so the above exclusions and limitations may not apply. This warranty gives you specific rights and you may also have other rights that vary from state to state. Contact the Customer Service Team at 1-855-HD- HAMPTON or visit www.HAMPTONBAY.com.

Pre-Installation

PLANNING INSTALLATION
Compare all parts with the Hardware Included and Package Contents sections. If any part appears missing or damaged, do not install this product and contact the Customer Service team at 1-855-HD-HAMPTON.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.

PACKAGE CONTENTS

Installation

1. Installing the mounting bracket
   □ Make sure the power is off.
   □ Pull the supply wires out of the outlet box.
   □ Unscrew the decorative nut (DD) from the canopy (A) and detach the mounting bracket (AA).
   □ Fasten the mounting bracket (AA) to the outlet box with the outlet box screws (BB).
   

2. Making the electrical connections
   □ Connect the negative wire (black) from the fixture to the negative wire from the outlet box, the positive wires (white)  from the fixture to the positive wires from the outlet box, and connect the bare copper from the fixture around the green screw on the mounting bracket, then connect it to the grounding conductor of the supply circuit together.
   □ Secure all connections together with the wire connectors (CC) and wrap electrical tape (not included) around the wire connectors (CC).
   □ Push all excess wire and wire connections back into the outlet box.
   

3. Installing the canopy
   □ Align the mounting hole on the canopy (A) with the threaded stem on the mounting bracket (AA).
   □ Secure the canopy (A) to the threaded stem on the mounting bracket (AA) using the decorative nut (DD).
   

4. Installing the shade and light bulb
   □ Secure the shade (B) to the socket on the canopy (A) using the socket ring (C).
   □ Install a medium base, 60 Watt maximum each, light bulb (not provided) into each socket.
   

Care and Cleaning

WARNING: Before cleaning the fixture, disconnect the electrical the fuse at the fuse box. power to the fixture by turning off the circuit breaker or removing the fuse at the fuse box.

• Use a dry or damp, clean cloth to wipe the surface of the fixture. Do not use abrasive cleaners or chemical solvent
• Allow the fixture to dry completely before power is restored.

Troubleshooting

on.
There is a faulty wire connection.| Check the wiring. Contact a qualified and licensed electrician if you are not comfortable troubleshooting wiring issues.
There is a faulty switch.| Test or replace the switch.
The bulb is burned out.| Replace the bulb.
The fuse blows or the circuit breaker trips when the light is illuminated.| There are crossed wires, or the power wire is not properly grounded.| Check the wire connections.

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

References

• Hampton Bay - The Home Depot
• Hampton Bay - The Home Depot

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>