T D TR32B Thermo Recorder log EZ User Manual
- June 11, 2024
- T D
Table of Contents
TR32B Thermo Recorder log EZ
User Manual
Package Contents
Before use, please confirm that all of the contents are included.
Introduction
Thermo Recorder log-EZ is a handy Bluetooth data logger designed to measure
and record temperature and humidity data, and which is accessed using the T&D
Thermo application running on a mobile device.
By using our free cloud service, you can access collected data via a web
browser and analyze with the T&D Graph Windows application.
The following application is available for mobile devices with iOS and Android operating systems.
T &D
Thermo
Mobile app for device configuration, data collection and graphing, data upload
to the cloud, and report creation
Device Preparation
Battery Installation
Recording will begin upon insertion of the battery.
Default Settings
Recording Interval: 10 minutes
Recording Mode: Endless
Upon reaching the logging capacity, the oldest data will be overwritten and recording will continue.
How to Use the Stand
Slightly bend the stand into a curved shape, and insert the logger through the
round holes of the stand so that the stand holds the unit.
It can then be placed on a flat surface such as a table or desk, or by using
the supplied screws hung on a wall.
The Display
Marks on LCD Screen
Connection/Communication Status
ON: Bluetooth Connected
BLINKING: Bluetooth Communication in progress
Battery Warning Mark
When this appears, replace the battery as soon as possible. A low battery may
cause communication errors.
Messages
Low Battery Condition
After the battery warning mark is displayed, if you continue to use the logger
without replacing the battery, this message will appear alternately with the
current temperature and humidity.
When this appears, the recording will continue but Bluetooth communication
will stop.
Operation Stopped
If the battery is further left unchanged until the LCD display goes blank, all
recorded data in the logger will be lost.
Connection LED
BLINKING (in blue)： Bluetooth Connected (LED can be disabled from the
app.)
OFF: Bluetooth Not Connected
Recording Intervals & Maximum Recording Times
Estimated Time until Logging Capacity (8,000 data sets) is Reached
| Rec Interval | 1 sec. | 30 sec. | 1 min. | 10 min. | 60 min. |
|---|---|---|---|---|---|
| Time Period | About 2 hours | About 2 days | |||
| 18 hours | About 5 days | ||||
| 13 hours | About 55 days | About 11 |
months
For details about how to use the Thermo Recorder log-EZ, refer to the HELP available from the following website.
T&D WebStorage Service
T&D WebStorage Service (hereinafter referred to as “WebStorage” ) is a free
cloud storage service provided by T&D Corporation.
It can store up to 450 days of data depending on the recording interval set
for the device. Using in conjunction with the “T&D Graph” software allows for
downloading stored data from the WebStorage for analysis on your computer.
T &D WebStorage Service Registration / Login
A new WebStorage account can also be created through the T&D Thermo App.
Refer to “T&D Thermo (Basic Operations)” in this document.
T&D Thermo (Basic Operations)
Download the App
1.1 “T&D Thermos” is available for free download from the App Store or Google
Play Store.
Set up a T &D Web Storage Service Account
-
If you don’t use the WebStorage go to Step 3.1:
In order to send data to the WebStorage, it is necessary to add an account to the App. -
If you don’t have a WebStorage account:
Tap ① [Menu Button] on the upper left corner of the app home screen → ② [App Settings] → ③ [Account Management] → ④ [Get a User ID] to create a new account.
Go back to the home screen and tap ① [Menu Button] → ② [App Settings] → ③ [Account Management] → ⑤ [Apply] after entering the account information you created. -
If you already have a WebStorage account:
Tap ① [Menu Button] on the upper left corner of the app home screen → ② [App Settings] → ③ [Account Management] → ⑤ [Apply] after entering your account information.
Add a Device to the App
- Tap ⑥ [+Add Button] in the lower right corner of the home screen to open the Add Device screen. The app will automatically search for nearby devices and list them at the bottom of the screen. Select and tap the device to add from the list of Nearby Bluetooth Devices. ( ⑦ [Device to Add])
- Enter the registration code (that can be found on the label supplied with the product), then tap ⑧ [Apply].
When the device is successfully added, it will be listed on the home screen.
Collect Data from the Logger
- In the list on the home screen, tap the target ⑨ [Device] to open the Device Info screen. When you tap the ⑩ [Bluetooth Button], the app will connect to the device, collect data and plot a graph.
- If a WebStorage account is set up (Step 2):
The data collected in Step 4.1 will be automatically uploaded to the WebStorage.
T &D WebStorage Service Registration / Login
A new WebStorage account can also be created through the T&D Thermo App.
Refer to “T&D Thermo (Basic Operations)” in this document.
T&D Graph
T&D Graph is a Windows software that contains a variety of useful functions including the ability to read and merge multiple data files, display recorded data in graph and/or list form, and save or print data graphs and lists . It allows access to data stored in the T&D WebStorage Service for data analysis by inserting shapes and posting comments and/or memos on the displayed graph.
Please refer to the HELP for operational details. （PC only website)
cdn.tandd.co.jp/glb/html_help/tdgraph-help-
eng/
References
- T&D Graph Help | T&D Corporation
- T&D Thermo｜T&D Thermo HELP｜T&D Corporation
- T&D WebStorage Service | T&D Corporation
- T&D Graph Help | T&D Corporation
- T&D Thermo｜T&D Thermo HELP｜T&D Corporation
- T&D WebStorage Service | T&D Corporation