GRANDSTREAM UCM6304/6308 IP PBX Appliance User Guide

: June 6, 2024
: GRANDSTREAM

Table of Contents

GRANDSTREAM UCM6304/6308 IP PBX Appliance Quick Installation Guide
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GRANDSTREAM UCM6304/6308 IP PBX Appliance Quick Installation Guide

UCM6304

The UCM6304/6308 is not pre-configured to support or carry emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is your responsibility to purchase SIP-compliant Internet telephone service, properly configure the UCM6304/6308 to use that service, and periodically test your configuration to confirm that it works as you expect. If you do not do so, it is your responsibility to purchase traditional wireless or landline telephone services to access Emergency Services.

GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO EMERGENCY SERVICES VIA THE UCM6304/6308. NEITHER GRANDSTREAM NOR ITS OFFICERS, EMPLOYEES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR INABILITY TO USE THE UCM6304/6308 TO CONTACT EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH.

The GNU GPL license terms are incorporated into the device firmware and can be accessed via the Web user interface of the device at my_device_ip/gpl_license. It can also be accessed here: http://www.grandstream.com/legal/opensource- software

To obtain a CD with GPL source code information please submit a written request to info@grandstream.com

PRECAUTIONS

Do not attempt to open, disassemble, or modify the device.
Do not use a third party power adapter.
Do not expose this device to temperatures outside the range of 32 – 113ºF / 0 ~ 45ºC for operating or 14 – 140ºF / -10 ~ 60ºC for storage.
Do not expose this device to environment outside of the following humidity range: 10-90% RH (non-condensing).
Do not power cycle the device during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction.

OVERVIEW

UCM6304/6308 is an innovative IP PBX appliance designed for small to medium business. Powered by an advanced hardware platform with robust system resources, the UCM6304/6308 offers a highly versatile state-of-the-art Unified Communication (UC) solution for converged voice, video, data, fax and video surveillance application needs. Incorporating industry-leading features and performance, the UCM6304/6308 offers quick setup, easy deployment and unrivaled reliability all at an unprecedented price point.

PACKAGE CONTENTS

CONNECTING THE UCM6304/6308

Rear view

Rear view

Front view

Front view

Note: The number of FXS and FXO ports depends on the UCM6304/6308 model.

Connect one end of an RJ-45 Ethernet cable into the WAN port of the UCM6304/6308.
Connect the other end of the Ethernet cable into the uplink port of an Ethernet switch/hub.
Connect the 12V DC power adapter into the DC 12V power jack 1 on the back of the UCM6304/6308. Insert the main plug of the power adapter into a surge-protected power outlet. (Connect the second power adapter into the DC 12V power jack 2 for failover purpose in case the first one is down).
Wait for the UCM6304/6308 to boot up. The front LCD display will show the UCM’s hardware information when the boot process is completed.
Once the UCM6304/6308 is successfully connected to the network via WAN port, the Network LED indicator will be lit green, and an IP address will be shown on the LCD display.
(Optional) Connect PSTN lines from the wall jack to the FXO ports, connect analog devices (phone and fax) to the FXS ports.

Press “OK” key to start browsing menu options.
Press “Down” to browser different menu options. Press “OK” to select an entry.
In the menu option, select “Back” to go back to previous menu.
The LCD will return to default display after being idle in menu for longer than 30 seconds.

CONFIGURING THE UCM6304/6308 VIA WEB GUI

Connect the computer to the same network as the UCM6304/6308.
Ensure the UCM6304/6308 is properly powered on then press the “Home“ button to displays the IP address and other information on the LCD screen.
Open a web browser on the computer and enter the displayed IP address into the search bar in the following format: http(s)://ipaddress:portnumber
Enter admin’s username and password to access the configuration menu. (The factory default username is “admin” while the default random password can be found on the sticker at the back of the unit).
For more detailed information on how to configure SIP extensions, PSTN connections, SIP trunks, and other system settings via the web UI, please download the UCM6304/6308 user manual here: http://www.grandstream.com/support/