BRAVEN Flye Sport Rush True Wireless Earbuds + Charging Case User Manual

BRAVEN Flyer Sport Rush True Wireless Earbuds + Charging Case

GET TO KNOW YOUR BRAVEN EARBUDS

REGISTER YOUR BRAVEN EARBUDS

Your FLYE SPORT RUSH earbuds have a 2-year limited warranty in case the unimaginable happens- visit www.zagg.com/BRAVEN and scroll down to the bottom, looking for “How to Register Your Product” and follow the instructions there.

IN THE BOX

(Earbuds (L + R), Charging case, Fit kit (3x ear tips, 3x wings), micro-use cable, sticker

HOW TO WEAR YOUR FLYE SPORT RUSH EARBUDS

Insert the earbud into your ear and rotate forward to fit comfortably.

CONNECT YOUR BRAVEN EARBUDS TO YOUR DEVICE

1. Place the FLYE SPORT RUSH earbuds into the charging case-both lights should start blinking RED and you should see two WHITE LEDs on the case.
2. Wait a few seconds and remove them from the case.
3. Your earbuds will automatically enter Bluetooth® Pairing mode, and the light on the right earbud will be flashing RED/WHITE, indicating they are in pairing mode
4. Go to your device’s Bluetooth settings and select BRAVEN FLYE SPORT RUSH from the list.

NOTE: DO NOT Select BRA VEN FL YE SPORT RUSH L
Your earbuds will remember the last 3 devices it has paired with and connect automatically when powered on.

VOICE ASSISTANT
To activate your phone’s voice assistant, triple-press the button on either earbud.

CONNECT YOUR BRAVEN EARBUDS TO A NEW DEVICE
To connect your FLYE SPORT RUSH earbuds to a new device, follow these steps:

1. Remove both earbuds from the case.

2. Press and hold the button on the right earbud tor 5 seconds until you see 3 red blinks, and the earbuds will turn off. Release the button.

3. Press and hold the button on the right earbuds for 5 seconds until it starts blinking RED/WHITE. Release the button now.

4. Go to your device’s Bluetooth settings and select BRAVEN FLYE SPORT RUSH from the list.
   NOTE: DO NOT Select BRAVEN FLYE SPORT RUSH L

5. Place both earbuds in the case and remove them again to sync them together automatically.

SPEAKER PHONE

If you get a call while paired to your BRAVEN earbuds, you’ll hear the ringtone come through the earbuds. Simply tap either earbud to answer the call, tap again to end it.

Manual Pairing Mode= Press and hold tor five seconds when oft (Note: Volume and track controls do not work during one-bud listening)

CONNECT TO THE LEFT BUD FOR INDEPENDENT USE

Note: Start with both earbuds in the charging case

1. Remove both earbuds from the case, then put the right earbud back into the case.

2. You should see the left earbud begin to flash WHITE/RED, this indicates they are in pairing mode.
   Note: This can take up to a minute to start flashing llEOIWHITE as it is searching tor the right earbud.

3. Go to your device’s Bluetooth settings and select BRAVEN FLYE SPORT RUSH L from the list.

Note: Now, you can use both right and left earbuds independently. once paired in independent use mode, pairing will only take 3 seconds upon removal from case (this to be changed to pop up message upon initial pair).

CHARGING YOUR BRAVEN EARBUDS

Before using your FLYE SPORT RUSH earbuds for the first time, fully charge them by placing the earbuds in the case and plugging the case in with the micro-use cable.

WATERPROOF FEATURES

The FLYE SPORT RUSH earbuds are IPX7 waterproof certified-designed to withstand complete submersion at up to 1 meter for 30 minutes.

NOTE: The charging case is not, only the earbuds.

NOTE: If sound is distorted after getting the earbuds wet, simply tap the ear tip against a hard surface a few times to remove any water in the ear canal way.

RESETTING YOUR BRAVEN EARBUDS

To reset your FLYE SPORT RUSH earbuds to factory settings, follow these steps:

1. Remove both earbuds from the case.

2. Press and hold the button on both earbuds for 5 seconds until you see 3 red blinks, and the earbuds will turn off.

3. Press and hold the button on both earbuds from off state for 10 seconds until you get 5 quick WHITE flashes from each earbud, continue to hold until the lights turn solid WHITE, then let go.
   NOTE: the earbuds will turn on and start blinking REOIWHITE after 3 seconds but keep holding!

4. Earbuds will blink rapidly WHITE until they reconnect to each other.

5. The right earbud will blink RED/WHITE indicating a successful reset and are now ready to pair again.
   NOTE: you may need to remove the BEAVEN FLYE SPO/IT RUSH from your pairing list on the device you are pairing to successfully re-pair them.

6. The earbuds are now reset.

LED LIGHT INDICATORS

Case LEDs:
When Case is opened 3 lights = high battery, 2 lights = medium battery, 1 light = low battery
When earbuds are placed in case:
Left LED = left earbud charging
Right LED = right earbud charging
Left and Right LED = both earbuds charging

Earbud LEDs:
Blinking RED LED when earbuds are in the case-earbuds are charging.
Solid WHITE LED when earbuds are in case-earbuds are fully charged.
RED/WHITE Alternating LED (Right bud)-Bluetooth Pairing mode.
RED/WHITE Alternating LED (Left bud)-Left bud only Bluetooth Pairing mode.
WHITE intermittent blinking-earbuds are connected to device but no active playback or active call.

STILL HAVING TROUBLE? WE’RE HERE FOR YOU!

Visit www.zagg.com/braven and scroll down to the Support section for FAQ’s and to contact customer service

WARNINGS CAUTION S LEGAL INFORMATION

To reduce the risk of fire or electric shock, do not expose the BRAVEN to rain or moisture while charging. The BRAVEN should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on or near it while being  charged or charging other devices. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a fire hazard. The power supply must be used indoors only. Make no modifications to the product or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance, and will void the warranty. Do not place any flame sources, such as lighted candles, on or near the BRAVEN. The BRAVEN contains small parts that may be a choking hazard and is not suitable for children under age 3. Do not continue charging the battery if it does not reach full charge within the specified charging time. Overcharging may cause the battery to become hot, rupture, or ignite. If you see any heat deformation or leakage, properly dispose of the battery. Do not attempt to charge the battery in temperatures outside the range of 32°-104°F (0°-40°C). If the battery begins to leak, do not allow the liquid to come in contact with your skin or eyes. If contact has been made, wash the affected area with plenty of water and seek medical attention immediately. Do not expose the product or battery to excessive heat, including direct sunlight or fire and storage or use inside cars in hot weather, where it can be exposed to temperatures in excess of 115°F (60°C). Doing so may cause the battery and power supply to generate heat, rupture, or ignite. Using the product in this manner also may result in a loss of performance and a shortened life expectancy. Extended exposure to direct sunlight may damage the external appearance and material qualities. Do not step on, throw, or drop batteries or the power supply or device, or expose them to a strong shock. Do not pierce, crush, dent, or deform the batteries or power supply in any way. If either becomes deformed, properly dispose of it. Do not short-circuit batteries. Do not attempt to service the BRAVEN yourself. Opening or removing covers may expose you to dangerous voltages or other hazards and will void the manufacturer’s warranty. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. Your Bluetooth device(mobile phone, music player, tablet, laptop, etc.) must support the A2DP Bluetooth profile in order to work wirelessly with your new BRAVEN speaker. The A2DP profile is supported by most recent mobile products with built-in Bluetooth capability. Please refer to your device’s user manual for details and instruction regarding the Bluetooth profiles it supports. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RADIATION EXPOSURE STATEMENT: This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restriction.” “This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry

Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This Class B digital apparatus complies with Canadian ICES-003.

Lithium Battery installed is not intended to be replaced by the USER.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Where the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

Correct Disposal of this product. This marking indicates that this product should not A be disposed with other household wastes throughout the EU. To prevent possible – harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.

This product complies with California Energy Commission efficiency standards for Y consumer battery chargers.

Operating Frequency Band: 2402 MHz to 2480 MHz Maximum RF power: 6dBm EIRP

Braved hereby declares that this device is in compliance with Radio Equipment Directive 2014/53/EU. The full text of the EU Do C is available at the following: https://www.braven.com/eu-declaration-of-conformity.

Braven follows Safety Instruction for CE-LV. Do not operate products in temperatures outside the range of -5 – 40°C.

Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table- cloths, curtains etc.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.

WARNING: The power adapter is used as disconnect device, the disconnect device shall  remain readily operable.

WARNING: Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. The battery (battery or batteries of battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.

Article 10

2. Manufacturers shall ensure that radio equipment shall be so constructed that it can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum.

10. In cases of restrictions on putting into service or of requirements for authorization of use, information available on the packaging shall allow the identification of the Member States or the geographical area within a Member State where restrictions on putting into service or requirements for authorization of use exist. The Commission may adopt implementing acts specifying how to present that information. Those implementing acts shall be adopted in accordance with the advisory procedure referred to in Article 45(2).

©2020 ZAGG Inc I All rights reserved I NASDAQ: ZAGG I Designed by ZAGG in Utah. MADE IN CHINA I ZAGG USA I 910 W. Legacy Center Way, Suite 500, Midvale, UT 84047 © ZAGG Inc I *IPX7
water standard protects from immersion under water, up to 1 meter for the duration of 30 minutes I The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. I BRAVEN and Flye Sport are trademarks of ZAGG.

Documents / Resources

| BRAVEN Flye Sport Rush True Wireless Earbuds + Charging Case [pdf] User Manual
Flye Sport Rush, True Wireless Earbuds Charging Case
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>