PATPET Pet Grooming Clipper 950 User Manual

QUICKSTART
Pet Grooming Clipper 950

User Manual
Before using please read the manual carefully and keep it properly for reference.

Product Diagram

Package Contents

Product Specification

Charging Method

1. Put the connecting plug into the slot of the charging stand.
2. Put the adapter plug into the socket.
3. Push the clipper into the charging stand after confirming power off.
4. The charge prompt icon lights up while charging.

• The clipper can be directly connected to the adapter to charge.
• The clipper can be directly connected to the adapter to use when no power.

Charging Instruction

1. The best charging temperature: 5ºC-40ºC
2. The battery will reach its best condition after being fully charged 3-4 times.
3. It’s a normal phenomenon for the clipper to give out some heat while using and charging.
4. Please use the original adapter to charge.

LCD Function Description

• RPM Control Function
  Real-time display the running speed of the product. RPM setting method: press “-” or “+” to set RPM. RPM setting range: 5000-7000.

• Intelligent Constant RPM Control Function
  The product can maintain a constant speed to running. The product can automatically compensate for the decline in the speed of cutting resistance.

• Running Light
  In the starting state, the running light starts to wn clockwise, the higher speed, the faster cycle.

• Battery Power Real-lime Display
  Real-time display the power of the Li-ion rechargeable battery.

• Cleaning Prompt Function
  When the load is too large, the cleaning icon will start to blink to remind you should unload the blade to clean and oil.

• Oiling Prompt Function
  When the load is too large or the product has accumulated 60 minutes of running, the oiling icon will blink to remind you should oil the blade.

*If keeping alarmed after cleaning and oiling, the blade has been worn, please replace the new blade to use.

LCD Function Description

• Charging Prompt Function
  When the battery power is less than 5%, the charging icon starts to blink to remind you should charge the product.

• After starting, if you do not have any key operation within two minutes. the screen will close to save electricity.

Blade Adjustment Function

1. To adjust upward. push the adjustment button directly to the required position.
2. To adjust downward, press the lock key button down and then push the adjustment button to the required position.

Loading & Unloading Comb

• Loading Comb
  Hold both sides, match the slot and push up. (avoid losing or dropping)

• Unloading Comb
  Push away the locked part of the comb on both sides.(do not press the front or back part to not damage the comb)

Cleaning

1. Before unloading the blade, make sure you have shut it down and separated the power line and the clipper.
2. Wash off the hair between the upper blade and the lower blade.(please do not take apart the spring of the blade in case it breaks down)
3. Clean the hair in the clipper by brush.
4. After cleaning the blade, add some lubricant between the upper blade and the lower blade. Otherwise, the cutting edge will go dull, make a weird noise, give out heat, and lower the performance.
5. Replace the blade (there must be a click sound if you match it right).

*11 the blade fell apart by accident during cleaning, please contact us to install it.

Loading Blade

1. Confirm the position of the blade has been adjusted to 1.9mm.
2. Loading the blade on the clipper.

Cautions

1. Do not tear down the chipper at random.
2. Do not clean product by water flush, and keep the unit away from the damp situations.
3. Do not use any corrosives such as alcohol, gasoline, etc. to clean the surface.
4. Avoid being charged above 40°C or below 0°C.

• If the product is not used for a long time, please charge it once at least every three months.
  Disposal of Battery
  The inside is a rechargeable battery. Please take the battery out before discarding it and dispose of the battery in an environment-friendly way.

GUEST| ADD.| | NAME|
---|---|---|---|---
TEL.|
POS| ADD.| | NAME|
NAME| | TEL.|

1. Production under strict quality management and check.

2. Problems during the normal use, a one-year warranty is offered by presenting the WARRANTY CARD. (blade is consumable, paid to provide)

3. Some paid services are following:
   a) problems caused by improper use;
   b) problems caused by improper fix or modification;
   c) problems caused by natural disasters;
   d) problems or damages caused by hitting or dropping after purchase;
   e) problems caused by power fault;
   f) problems caused by not obeying the rules;

4. Please present the WARRANTY CARD for maintenance.

Quality Moving the World

Shenzhen Patpet Technology Co., Ltd
https://patpet.com/
Become a dealer: inquiry@patpet.com
After-service: support@patpet.com
@PatpetDogCollar
Youtube Video Guide

Made in Chana

Documents / Resources

| PATPET Pet Grooming Clipper 950 [pdf] User Manual
PATPET, Pet, Grooming, Clipper, 950, Dog Grooming Clipper
---|---

References

• PATPET

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>