ClearOne 910-2100-180 Unite 180 4K Panoramic Camera User Manual
- June 6, 2024
- ClearOne
Table of Contents
User Manual
UNITE® 180 4K Panoramic Camera
ClearOne® Contacts
Headquarters 5
225 Wiley Post Way Suite 500
Salt Lake City, UT 84116| Headquarters
Tel: +1.801.975-7200
---|---
Sales
Tel: +1.801.975.7200
sales@clearone.com| Technical Support
Tel: +1.801.974.3760
videotechsupport@clearone.com
Notices
© 2021 ClearOne, Inc.ClearOne, Inc. All rights reserved.
Information in this document is subject to change without notice.
Document: DOC-0477-001v1.0 August 2021
Introduction
The UNITE 180 4K Panoramic Camera
UNITE 180 4K Panoramic Camera provides a full 180-degree panoramic field-of-
view with “real-time stitching” to achieve a variety of useful viewing modes
for any application and environment.
UNITE 180 is ready to use right out of the box. The camera itself has 6
viewing modes. Details are in the Quick-Start Guide.
PanoCAM Studio Camera Software
To use the camera’s power features, access the PanoCAM Studio software.
This user manual provides detailed information about use of the PanoCAM Studio
software.
Related Links
• Datasheet
• Quick-Start Guide
Installing the Software
To install PanoCAM Studio, complete the following steps:
-
Connect the UNITE 180 camera to your computer’s USB port.Windows displays the software’s .exe file as if it was on a CD drive.
-
Double-click the .exe file.
-
Select your preferred folder location , then click Next.
-
On the Ready to Install dialog window, click Install.
The software displays the Installing window,
and then the Completing the PanoCAM Studio Setup Wizard screen:
The setup wizard places a shortcut on your desktop,
and launches Studio. -
Click the Launch PanoCAM Studio checkbox, then click Finish.
The setup wizard places a shortcut ( ) on your desktop, and launches Studio.
Studio displays a set of informative windows, beginning with Manual selection.
After you click Skip, or at the end of the information
windows, Studio activates the camera and displays a window similar to the
following:
Launching Studio with Any Application
For example, if you launch Studio when you have the UNITE 180 set as your
video device in COLLABORATE Space, Studio displays the following screen:
To resolve this conflict, do the following:
-
From within COLLABORATE Space, click the UNITE 180 checkbox to de-select it.
-
From within Studio, click Try Again.
Studio is now available within COLLABORATE Space:
The PanoCAM Studio Interface
For quick access to a topic, click the associated number on the following
images:
Preview Window Position
Manual Boxes
To create boxes manually, click on the window and diagonally drag your mouse.
To access options for boxes, click the box to select it, then right-click.
- Auto-tracking. Click the checkbox to enable. The color of the manual box changes to blue.
- Pin. Makes the manual box irreplaceable by another box. Click the checkbox to enable.
- Delete. Deletes the manual box.
Display Layouts
Studio provides the following six display layouts:
3.1 Compose Layout
• Panoramic view on top, close-up boxes of tracked person, or manually defined
boxes on the bottom.
•Maximum number of close-up boxes: 8
• When the camera detects no person, and no manual box has been selected, the
output area displays a panorama on the top and blank icons on the bottom.
• When the detected persons or areas of a manual
box selection are near each other, the system merges them into one close-up
box.
3.2 Manual Layout
• The output screen displays the area of the manual box selection.
• Face tracking is not available with Manual layout.
3.3 Body Fit Layout (Autoframing Layout)
• The output screen displays close-up views of each tracked person.
• When the camera detects no person, and no manual box has been selected, the
output screen displays a panorama.
• The size of the manual boxes affects the width of the panorama in the output
screen:
3.4 Grid Layout
• Recommended for 1 to 4 participants.
• Maximum number of close-up boxes: 4
• In the output screen, the system displays each tracked person or manual
selection in a separate close-up box.
• When the camera detects no person, and no manual box has been selected, the
output screen displays blank icons.
• When the detected persons or areas of a manual box selection are near each
other, the system merges them into one close-up box.
3.5 Presentation Layout
• In the output screen, the system displays a combo box, or picture-in-
picture.
• When the camera detects no person, and no manual box has been selected, the
output screen displays the area within the yellow box.
3.6 Speaker Layout
• In the top of the output screen, the system displays the detected persons;
In the bottom of the output screen, it displays a panorama view.
• When the camera detects no person, and no manual box has been selected, the
output screen displays blank icons in the top and a panorama view in the
bottom.
Image Mirror
Image Mirror Off
Auto-Detect
Auto-detect on:
Auto-detect while responding to movement:
Auto-detect after responding to movement:
Auto-Tracking
Auto-tracking is similar to Auto-detect, but is more sensitive to visual
changes (movement).
Effect (Light Settings)
Normal
Custom Settings
Window Vertical Slider
Use the Window Vertical Slider to vertically position the window (defined by
white dash lines).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>