Kartice FD06FD07 3-in-1 Wireless Charger User Manual
- June 5, 2024
- Kartice
Table of Contents
Kartice FD06FD07 3-in-1 Wireless Charger
User Manual
Product Overview
Compatibility
Smartphone: all Qi compatible smartphones.
Earbuds: all Qi compatible earbuds charging cases.
Smart watch: Apple Watch.
User Instruction
Step 1. Plug in a QC3.0/PD charging adapter. A low-power charging adapter
might not work.
Step 2. Put your phone, earbuds charging case or smartwatch on the device for
wireless charging.
Indicator Light Guide
Charger Status| Plugged in| Standby| Charging| Fully
Charged| Error Detected
---|---|---|---|---|---
Indicator Light| On for 3 Sec| OFF| Green Light| Greenlight| Red light
flashes
Specification
Input: 9V/2A 5V/3A
Charging Cellphone Output: 15W/10W/7.5W/5W
Charging Watch Output: 2.5W
Charging Earbuds Output: 5W
Charging Standard: Qi Compatible
Important Reminder
- For maximum charging speed, please use a cable and an adapter compatible with QC (Quick Charge) 2.0/3.0 or PD (Power Delivery) fast charging.
- Any phone case or earbuds case thicker than 5mm will stop this charger from working properly.
Warning!
- Never disassemble the device, keep it away from corrosive liquids and fire.
- This device might not work in extreme temperatures, i.e., below 0 C (32 F) or above 60C (140 F).
- Never expose this device in an extremely humid, hot, or corrosive environment.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Warning Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device complies with part 18 of the FCC Rules.
Information to the user.
- the device has potential interference, but the interference is very small and meets the requirements of the FCC rule
- Equipment system maintenance is simple, please refer to the manual
- The user can take simple measures to correct the interference. Such as staying away from interference sources, turning off interference sources, etc.
RF exposure compliance statement:
The equipment complies with the FCC Radiation exposure limit set forth for
uncontrolled environments.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.