ClearOne Versa Mediabar Video Soundbar User Guide
- June 10, 2024
- ClearOne
Table of Contents
Versa™ Mediabar™
Quick-Start Guide
Important Safety Instructions
- Read, follow and keep these instructions.
- Heed all warnings.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type
- plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Only use attachments/accessories specified by the manufacturer.
- Unplug the array during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Protect the PoE injector’s power cord from being walked on or pinched; particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock.
- This product can interfere with electrical equipment such as tape recorders, TV sets, radios, computers and microwave ovens if placed in close proximity.
- Class 2 wiring IS REQUIRED. Only qualified personnel should wire and install.
- Underwriters Laboratories (UL) requires these safety notifications:
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE
THE LIGHTING FLASH AND ARROWHEAD WITHIN THE TRIANGE IS A WARNING SIGN ALERTING
YOU OF DANGEROUS VOLTAGE INSIDE THE PRODUCT.| CAUTION
RISK OF ELECTRIC SHOCK DO
NOT OPEN
AVIS RISQUE DU CHOC ELECTRIQUE
– NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.| THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN
ALERTING
YOU OF IMPORTANT INSTRUCTIONS
ACCOMPANYING THE PRODUCT.
---|---|---
SEE MARKING ON BOTTOM/BACK OF PRODUCT
| Use only in non-tropical locations.
---|---
| Use only at altitudes of 2000 meters or less.
Product Operating and System Requirements
See the Versa™ Mediabar™ datasheet at:
https://www.clearone.com/sites/default/files/2021-07/Versa%20Mediabar%20DS%20Rev%202.5.pdf
Packing List
Verify that you have received all parts associated with each of the
components.
Inspect your shipment carefully. If the shipment shows obvious signs of
damage, retain original boxes and packing material for inspection by the
carrier, and contact them immediately. ClearOne is not responsible for product
damage incurred during shipment.
Connections
Front View Back View Remote Control
Mounting the Versa Mediabar
Four mounting options are available for the Versa Mediabar.
A. Balanced on the Top Bezel of the Monitor
Adjust the bracket hinges so the Mediabar balances on the top. B. Mounting Bars
Use thumbscrews to attach the mounting bars to the monitor, and then the
Mediabar to the mounting bars. C. Attach Mounting Bars to
Mounting Bracket
If the monitor already has a mounting bracket attached, use the thumbscrews
and mounting clips to attach the mounting bars to the horizontal bracket. Then
use the thumbscrews to attach the Mediabar to the mounting bars. D. Attach to Wall
Use appropriate screws and anchor hardware as needed to securely attach each
of the L-shaped wall mount brackets to the wall. Then use thumbscrews to
attach each of the Mediabar’s hinged brackets to the wall bracket.
Caution: It is the responsibility of the installer to ensure the Versa
Mediabar is firmly secured to the wall. Anchoring hardware appropriate to the
wall type must be selected and provided by the installer.
Connect
-
Use the USB cable to the Mediabar’s USB 3.0 Type B port to your computer’s USB Type A port.
-
Connect the AC adapter to the Mediabar’s power port.
-
Plug the AC adapter into a standard power outlet.
With the Mediabar powered-on and connected to your computer, your operating system recognizes and registers the Mediabar as a device.
-
Launch COLLABORATE Space or another video collaboration application, and then select the Versa Mediabar.
-
To pair a Bluetooth device with the Versa Mediabar, press and hold the remote control’s Home button for approximately 20 seconds.
The Versa Mediabar appears in Bluetooth devices as Versa Mediabar BT.
Dimensions
ClearOne ® Contacts
Headquarters
5225 Wiley Post Way Suite 500
Salt Lake City, UT 84116| Headquarters
Tel: +1.801.975-7200
---|---
Sales
Tel: +1.801.975.7200
sales@clearone.com| Technical Support
Tel: +1.801.974.3760
videotechsupport@clearone.com
Notices
© 2021 ClearOne, Inc, Inc. All rights reserved.
Information in this document is subject to change without notice.
Document: QSG-0136-001v1.2 October 2021
QSG-0136-001v1.2 October 2021