Baxton Studio BBT6376 Carlotta 3 Piece Bedroom Set Instruction Manual
- October 30, 2023
- BAXTON STUDIO
Table of Contents
Baxton Studio BBT6376 Carlotta 3 Piece Bedroom Set
Product Information
BBT6376 Queen Bed
The BBT6376 Queen Bed is a wooden bed that requires assembly. It comes with a headboard, a footboard, two side rails, a center rail, three center support legs, 26 bed slats, four bed legs, two center supports, one headboard support rail, two headboard boxes (left and right), and two headboard support woods. The bed requires M8 x 30mm bolts, M6 x 40mm bolts, M8 x 80mm bolts, M6 flat washers, M6 spring washers, M8 flat washers, M8 spring washers, wood screws M3.5 x 16mm, bed slat side fitters, bed slat center fitters, M4 Allen key (ball shape), M5 Allen key (ball shape), and wood screws M4 x 20mm for assembly. The center support legs must be adjusted to be straight when moving the bed position to avoid any broken problem.
Hardware and Furniture Part List
| Item | Description | Qty |
|---|---|---|
| A | Headboard | 1 PC |
| B | Footboard | 1 PC |
| C | Side Rail | 2 PCS |
| D | Center Rail | 1 PC |
| E | Center Support Leg | 3 PCS |
| F | Bed Slat | 26 PCS |
| G | Bed Leg | 4 PCS |
| H | Center Support | 2 PCS |
| I | Headboard Support Rail | 1 PC |
| J | Headboard Box (L/R) | 2 PCS |
| K | Headboard Support Wood | 2 PCS |
Hardware List
| Item | Description |
|---|---|
| 1 | JCBB Bolt M8 x 30mm |
| 2 | JCBC Bolt M6 x 40mm |
| 3 | JCBB Bolt M8 x 80mm |
| 4 | M6 Flat Washer |
| 5 | M6 Spring Washer |
| 6 | M8 Flat Washer |
| 7 | M8 Spring Washer |
| 8 | Wood Screw M3.5 x 16mm |
| 9 | Bed Slat Side Fitter |
| 10 | Bed Slat Center Fitter |
| 11 | M4 Allen Key (Ball Shape) |
| 12 | M5 Allen Key (Ball Shape) |
| 13 | Wood Screw M4 x 20mm |
Cautions
- Do not FULLY-TIGHTEN the nut or nut bolt until all nut or bolt is ready assembled.
- Do not OVER-TIGHTEN the nut or bolt to avoid causing damages to the thread.
- Keep all hardware parts out of reach of children.
Usage Instructions
- Read the assembly instructions carefully.
- Ensure that all parts are complete before starting the assembly process.
- Place all wooden furniture parts on a clean and flat soft surface to prevent them from being scratched.
- Follow the figure to start assembling the bed.
- Do not FULLY-TIGHTEN the nut or nut bolt until all nut or bolt is ready assembled.
- Do not OVER-TIGHTEN the nut or bolt to avoid causing damages to the thread.
- When moving the bed position, adjust the center support legs to be straight to avoid any broken problem.
Product Information: BBT 3106 Night Stand
The BBT 3106 Night Stand is a wooden nightstand that requires assembly. It comes with a nightstand and two handles. It requires handle screws and flat washers for assembly.
Hardware and Furniture Part List
| Item | Description | Qty |
|---|---|---|
| A | Night Stand | 1 PC |
| B | Handle | 2 PCS |
Hardware List
| Item | Description |
|---|---|
| C | Handle Screw |
| D | Flat Washer |
Cautions
- Do not FULLY-TIGHTEN the nut or nut bolt until all nut or bolt is ready assembled.
- Do not OVER-TIGHTEN the nut or bolt to avoid causing damages to the thread.
- Keep all hardware parts out of reach of children.
Product Usage Instructions
- Read the assembly instructions carefully.
- Ensure that all parts are complete before starting the assembly process.
- Place all wooden furniture parts on a clean and flat soft surface to prevent them from being scratched.
- Follow the figure to start assembling the nightstand.
- Do not FULLY-TIGHTEN the nut or nut bolt until all nut or bolt is ready assembled.
- Do not OVER-TIGHTEN the nut or bolt to avoid causing damages to the thread.
MODEL BBT6376 QUEEN BED
Introduction
Read this instruction carefully. See the hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling.
- CAUTIONS: 1. Do not FULLY – TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
- Do not OVER-TIGHTEN the nut or bolt to avoid causing damages to the thread.
- Keep all hardware parts out of reach of children.
NOTE: THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed: Screwdriver (not provider).
PART LIST
HARDWARE LIST
INSTALLATION INSTRUCTIONS
MODEL BBT 3106 NIGHTSTAND
Read this instruction carefully. See the hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling.
CAUTIONS
- Do not FULLY – TIGHTEN the nut or nut bolt until all nut or bolt is ready assembled.
- Do not OVER-TIGHTEN the nut or bolt to avoid causing damage to the thread.
- Keep all hardware parts out of reach of children.
NOTE: THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
PART LIST
PART LIST
ITEM| DESCRIPTION| QTY
A| NIGHTSTAND| 1 PC
B| HANDLE| 2 PCS
C| HANDLE SCREW| 2 PCS
D| FLAT WASHER| 2 PCS
E| DRAWER| 2 PCS
1| –|
---|---|---
2| –|