BluMill BL-168DL Air Cooler User Manual

AIR COOLER

MANUAL
Model no.: BL-168DL

Thank you for purchasing our air cooler. We kindly request that you read this instruction manual carefully and keep it in a safe place for future reference.

WARNING

• Do not place the air inlet too close to a wall, curtains, etc. because it will prevent or hamper the flow of air.
• If using for the first time, please check whether your voltage corresponds with the voltage details on the air cooler’s nameplate.
• Before use, please check to make sure that the power cord and plug are not broken. Do not twist or turn the plug because that may cause connection problems.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person.
• Do not cover the outlet and keep the air fan away from the socket. Choose a socket which supplies more than 10A current and does not use the same socket for any other device.
• Keep hands and body parts away while the air cooler is working. Keep a particular eye on children.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understanding the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Turn off the power before pulling out the plug. Do not pull the power cord and do not pull the power plug since that may cause a short circuit, fire, or electric shock.
• To avoid the risk of an electric shock, do not handle the power plug if you have wet hands.
• Keep the plug away from the socket when not in use.
• The air cooler must be kept flat and not angled during use.
• Do not use the air cooler outdoors, or near a bath, shower, or pool.
• The water level in the water tank must always be below ‘Max’ and above ‘Min’ when the air cooler is operating in cooling (humidifying) mode.
• Be careful when moving the air cooler after the water tank has been filled.
• Do not place anything on top of the air cooler.
• Do not cover the air cooler outlet and inlet.

AIR COOLER

1. Air filter
2. Cooling pad
3. Water pump
4. Back
5. Control panel
6. Outlet
7. Casters
8. Water tank
9. Ice pack

CONTROL PANEL

1. On-off switch / High, Mid, and Low
   • The air cooler will make a buzzing sound when you plug in the power cord.
   • If you press the Low button, the air cooler will operate at low speed.
   • If you press the Mid button, the air cooler will operate at medium speed.
   • If you press the High button, the air cooler will operate at high speed.

2. Cooler
   • After you have added the ice packs press the Cooler button and the air will be cooled.

3. Swing
   • Press the Swing button and the blades will swing to the left and right.

ADDING WATER TO THE WATER TANK

The water tank is located low down at the rear of the air cooler. Pull it out 1/3 and pour fresh water into it [1].

• Please check the water level on the display when pouring in the water [3].
• The water level in the water tank must stay below ‘Max’ during pouring.
• The water level must also stay above ‘Min’ when the air cooler is cooling and humidifying [3].
• Place the frozen ice packs (or ice cubes) in the water tank whenever you want cooler air [2].

| |
---|---|---

The water level in the water tank must stay below ‘Max’ after the ice packs (or ice cubes) have been placed in the water tank.

USING THE ICE PACKS

The ice packs can be used to cool and slowly absorb heat from the water and therefore lower the temperature of the water in the water tank and the temperature of the surrounding air. When the frozen ice packs are added to the air cooler, it will blow cooler air.

• Put the ice packs in the freezer and remove them when frozen.
• Pull out the water tank and place the frozen ice packs in the water tank.
• Each air cooler comes with two ice packs so that you will be able to use it continuously.

TECHNICAL DATA

CLEANING

| Cleaning the air filter:
Pull out the plug and remove the holder from the air filter by hand. Remove the air filter and clean it using a neutral detergent, a soft brush, and freshwater. Then put the air filter back into the air cooler.
---|---
| Cleaning the cooling pad:
Pull out the plug and remove the air filter and the cooling pad from the air cooler. Clean the cooling pad with fresh water, a detergent, and a soft brush. Then put it back into the air cooler.

IMPORTANT: In order to avoid leaks, the cooling pad must be installed smoothly.

| Cleaning the water tank:
Pull out the plug and remove the water tank. Wipe off most of the scale from the water tank using a cloth and some detergent. Clean the water tank with fresh water and return it to the air cooler.
---|---
| Cleaning the housing:
Wipe off the housing using a neutral detergent and a soft cloth.

IMPORTANT: When cleaning the air cooler, pull out the plug and switch off the power supply. None of the control panel parts must be immersed in water during cleaning.

Distributed by
OCG Retail
Eemnesserweg 11-10
1251 NA Laren
the Netherlands
klantenservice@omnichannelgroup.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>