Lasko Ultrasonic Cool Mist Humidifier UH200 Instruction Manual

June 6, 2024
Lasko

Lasko Ultrasonic Cool Mist Humidifier UH200

Register Your Product Today
www.lasko.com/product-registration

You will benefit from:
– Efficient and enhanced support
– Future product updates


Have a Question? Need a Part?
Please Do Not Return Product to Store! Contact Lasko Customer Service: 800-233-0268 Monday-Friday 8AM – 5PM EST. (Valid in the USA, its Territories, and CANADA Only)| READ AND SAVE THESE INSTRUCTIONS
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage!
This Humidifier is for residential use only. It is not intended to be used in commercial, industrial or agricultural settings.
---|---

MPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, these instructions and warnings should always be followed to reduce the risk of fire, electrical shock and injury to persons:

Read all instructions before using this Humidifier.

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:

| ALWAYS be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this condition should be replaced by a qualified electrician
---|---
| ALWAYS unplug the power cord when servicing, cleaning or moving the Humidifier. DO NOT use the ON/OFF switch as the sole means of disconnecting power. NEVER leave children unattended when the Humidifier is on or plugged in. ALWAYS turn off and unplug the Humidifier when not in use.
---|---
| BE CERTAIN that the power source for the Humidifier is 120V AC. DO NOT plug the Humidifier into 240V or other power source. The Blue Plug™ on your Lasko Humidifier is a safety feature. It contains a non-replaceable safety device (fuse) that should not be removed or tampered with. To reduce the risk of fire, electric shock and personal injury, DO NOT attempt to remove, replace, repair or tamper with the originally supplied plug. If the Humidifier has stopped functioning, it may be due to the safety device incorporated in this plug.
---|---
| THIS HUMIDIFIER HAS A POLARIZED PLUG (one blade is wider than the other). This plug is designed to fit into the outlet only one way. Match the wide blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety feature. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
---|---

USE ONLY DISTILLED WATER IN THIS PRODUCT.

  1. Make certain that the power source conforms to the electrical requirements of the Humidifier.
  2. Children should be supervised to ensure that they do not play with the appliance.
  3. Do not allow children to play with any product packaging, such as plastic bags.
  4. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiator, stoves, or heaters.
  5. DO NOT place humidifier near heat sources such as stoves, radiators, and heaters. Do locate your humidifier on an inside wall near an electrical outlet. The humidifier should be at least 6 inches away from the wall for best results.
  6. Do not attempt to refill humidifier without first unplugging the unit from it’s electrical outlet.
  7. Never place anything over moisture outlet when the unit is running.
  8. DO NOT operate any appliance with a damaged cord or plug, after the appliance malfunctions, or if it has been dropped or damaged in any manner.
  9. Use appliance only for intended household use. DO NOT use outdoors.
  10. Always place humidifier on a firm, flat, level surface at least 24 inches away from the floor.
  11. DO NOT allow the moisture outlet to directly face the wall.
  12. Humidifier should be unplugged when not in use.
  13. NEVER tilt, move, or attempt to empty unit while it is operating.
  14. Shut off and unplug before removing the water tank and moving the unit.
  15. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only.
  16. Do not plug in the cord with wet hands: electric shock could result.
  17. NEVER use detergents, gasoline, glass cleaner, furniture polish, and paint thinner, or other household solvents to clean any part of the humidifier.
  18. Do not pour water in any openings other than the water tank.
  19. Excessive humidity in a room can cause water condensation on windows and some furniture. If this happens, turn the humidifier OFF.
  20. Never place housing under water flow or immerse in liquids.
  21. NEVER leave children unattended near the humidifier.
  22. NEVER let children clean or do user maintenance without supervision.
  23. Unplug the appliance during filling and cleaning.
  24. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  25. DO NOT add water mist output, or it may damage the unit.
  26. Where possible, avoid the use of extension cords. If you must use an extension cord, minimize the risk of overheating by using the shortest cord possible and ensuring that it is UL Listed. NEVER use a single extension cord to operate more than one appliance
  27. Do not insert fingers or foreign objects into the Humidifier. Do not block or tamper with the Humidifier in any manner while it is in operation. NEVER tilt or attempt to move the Humidifier while it is operating.
    WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE THIS HUMIDIFIER WITH ANY SOLID STATE SPEED CONTROL DEVICES.
    28. Do not place Humidifier on an electrical appliance.
    Model UH200
    Lasko Products, LLC
    820 Lincoln Avenue
    West Chester, PA
    19380
    www.lasko.com
    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
    (1) This device may not cause harmful interference, and
    (2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.
    “NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    -Reorient or relocate the receiving antenna.
    -Increase the separation between the equipment and the receiver.
    -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    -Consult the dealer or an experienced radio/TV technician for help.”

SAVE THESE INSTRUCTIONS

Parts Included

Mist Outlet

|

Water Tank

|

Base

|

Drawer

---|---|---|---

Mist Outlet Collar

|

Tank Cap

|

Aroma Pad

|

Cleaning Brush

Filling

  1. Separate the Tank from the Base of the unit

  2. Flip over Water Tank and open the Tank Cap, turning it to the left

  3. Pour cool, clean Distilled Water directly into the Tank

  4. Close the Tank Cap, turning it to the right. FIRMLY secure Cap

Mist Outlet

The Mist Outlet can be turned 360˚

Aroma

Pull out the Drawer and add a few drops of aroma oil to the Aroma Pad

Cleaning

  1. Remove the Tank and empty all water from unit Base and Tank

  2. Use ONLY the enclosed Cleaning Brush to gently clean disk

Controls

MAINTENANCE

To reduce the risk of electrical shock and fire please observe the following instructions:

– Always unplug the cord before moving, servicing or cleaning.
– Clean the body of the Humidifier with a soft cloth only.
– NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.
– USE ONLY DISTILLED WATER IN THIS PRODUCT

SERVICING: For servicing, other than general user maintenance, please contact Customer Service at 800-233-0268, Monday through Friday, from 8am-5pm Eastern.
STORAGE: Store the Humidifier with these instructions, in the original carton in a cool, dry place.
DISPOSITION: Corrugated packaging materials are recyclable. For environmentally responsible disposal of this product, contact your local waste service provider or visit www.1800recycling.com®.

TROUBLE SHOOTING TIPS

PROBLEM SOLUTION
Water vapor and humidity are not produced Power plug: Unplug and then try

again.
Power Failure: When the power is returned, try again.
Tank Installation: Make sure the tank is correctly attached.
The surface of the ultrasonic disk is dirty: Clean ultrasonic disk.
Air blows but water vapor is not produced.| Excessive Water: Empty base. Reinstall filled water tank.
Detergent residue and/or oil ingredients from cosmetics, etc. may be in tank; wash out tank and try again.
The surface of the ultrasonic disk is dirty: Clean ultrasonic disk. If you use hard water, replace with distilled water.
The humidity has a bad smell.| Poor maintenance or dirty water: Clean the product thoroughly, and fil it with fresh water.
White dust is forming on nearby furniture| Hard water may deposit a certain of dust. Dust in the air also settles because of added humidity in the room. Use only distilled water in this product, which will prevent this issue.
Unit has stopped working.| No or low water. Unplug unit and refill tank.
Water is accumulating outside of unit or area surrounding unit.| Saturation of humidity. Lower mist control setting. Unit not level and water is accumulating. Unplug and place on level surface. Point spray away from objects. Raise unit on a water-resistant level surface 2-3 feet off of floor.
Water dripping when refilling.| Water remaining on bottom of tank. Wipe tank or tilt to drain before transporting.
Increased noise level.| Unit must be placed on a flat, level, hard surface. Make sure it is NOT placed on a soft or absorbent surface.
Red light on power dial.| Indicates low water. Unplug and refill tank.

LASKO PRODUCTS, LLC LIMITED WARRANTY

(VALID IN THE USA, ITS TERRITORIES, AND CANADA ONLY)
WHAT THIS WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials.
HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.
WHAT LASKO WILL DO: During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same or comparable model. For all warranty claims, the product must be returned to Lasko Products, LLC at customer expense with proof of purchase within the warranty period. Contact the Lasko customer service department to obtain a Return Authorization (“RA”). DO NOT return products without an RA or the warranty claim will not be processed.
WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed because of accident, improper handling or operation, shipping damage, abuse, misuse, unauthorized repairs made or attempted. This warranty does not cover shipping costs for the return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement.
ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY), LAST ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR TRANSFERS THE PRODUCT, WHICHEVER FIRST OCCURS AND IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACEMENT OR REPAIR OF ANY HOUSE FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH LIABILITY SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state and province to province. Proof of purchase is required before a warranty claim will be accepted.


CUSTOMER SERVICE:
Toll-Free800-233-0268. Email: producthelp@lasko.com
Our Customer Service team is available to assist you with product and service questions, and replacement parts. They can be reached Monday through Friday, 8am-5pm Eastern. Please have your model number available, as well as the type and style (located on the underside of your product).
Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
(Please do not send product to this location)www.lasko.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals