Haier KJF235KAAA Air purifier User Manual

Air purifier
Users Manual
Model: KJF2 35KAAA

• Please read this manual carefully before use.
• The company reserves the right of final interpretation on this manual.
• Photos may not match the product you have ordered exactly.
• After reading it, please keep this manual together with the invoice.
• Product technology or software may upgrade from time to time without notice.

YOUR AIR PURIFIER

Please read this user manual carefully before use, and keep it in a safe place for future reference. Refer to the cautions section for important information.
STANDARD PARTS
One air purifier
One instruction manual
TECHNICAL DATA

CAUTIONS

a) Do not shake the appliance or use it in unstable locations where the purifier can easily fall over, as it may cause electric shocks, fire, or other damage.
b) The unit is intended for indoor use only.
c) Do not use the appliance in wet surroundings or surroundings with high ambient temperatures.
d) Do not block the air inlet and outlet
e) Ensure that foreign objects do not fall into the appliance through the air outlet.
f) Please switch off and unplug the appliance when it is not in use for a long time.
g) The purifier disassembly should be performed by a qualified technician only.

USER INTERFACE
Control Panel

USER INTERFACE

USER INTERFACE

“1 Hour” 4 “2 Hours” 4 “4 Hours” 4 “8 Hours” 4 “off”
4| | Ionizer Function/Child lock
5| | Filter reset

1. Standby
   Connect the power cord. The buzzing sound indicates the appliance is connected to the power source. All the indicators light up. Standby mode is set in 3 seconds, an air purifier is ready to operate.

2. Turn-ON/OFF
   Press the Power button to turn on the purifier. Press the Power button again to turn the purifier off.

3. Set the fan speed
   There are several fan speeds available. You can choose the Auto/Sleep/Low /High-speed mode by pressing the Speed button.
   Automatic
   Set the fan speed to Auto. The air purifier sets the fan speed by itself according to the ambient air quality in the operating area. The air quality sensor measures the air quality and selects the indicator light color automatically.
   a) If the air quality in the operating area is bad, the indicator turns red color and a purifier sets the High fan speed.
   b) If the air quality in the operating area is good, the indicator turns yellow color and a purifier sets the Low fan speed. c) If the air quality in the operating area is very high, the indicator turns green color and a purifier sets the Sleep mode.

4. Ionizer Function/Child lock
   a)Touch the button to switch on/off the Ionizer, Turn on to enhance the ability to keep the air fresh.
   b)Press 3s to enter child lock.

5. Timer
   Set the required number of hours you need the appliance to operate. Press the Timer button repeatedly to set1/2/48/0ff.

6. Filter Reset Once the purifier counts 2000 hours, the Filter Reset button starts to flash. Replace the filter and press the Filter Reset button to reset the filter lifetime counter. Note: do not forget to cleanse your hands after the filter replacement.

7. Sleep mode Set the Sleep mode by pressing the Speed button. Power and Speed buttons will be dimmed, all other lights are off. Press any button to quit the Sleep mode.

PRODUCT FEATURES

1. filter
2. Particle sensor
3. Three color air quality indicator
4. Four timers preset
5. Adjustable fan speed, Sleep mode
6. Filter change reminder

AIR PURIFIER SYSTEM

PRODUCT OVERVIEW

MAINTENANCE &REPEIR

TROUBLESHOOTING

a) Rotate the base counterclockwise till the very end, remove the base, take the HEPA filter out to clean, or replace it with the new one.
b) Rotate the product clockwise to assemble it.
c) An indicator at the control panel notifies you if the filter needs to be replaced.

TROUBLESHOOTING

the appliance corresponds to the local power voltage
Odor can’t be removed| The filter is dirty| Clean or replace the filter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>