EWEADN V3Pro Keyboard User Manual

EWEADN V3Pro Keyboard

Specifications:

• Model : Forerunner V3Pro keyboard
• Battery Parameter : 2000mAh (supports charging – does not support fast charging, please connect to the computer to charge)
• Connection Mode : 2.4G connection, Bluetooth, wired Wireless Connection Distance: 10 meters (unimpeded open environment)
• Supported Systems : Windows, macOS
• Product Size : Keyboard – Height: 28.0mm, Length: 444mm, Width: 134mm

Product Usage Instructions

1. Switch Indication:
   TYPE-C: Indicates the interface. The power switch is for on/off functionality.

2. Indicator Light and LOGO Light:
   When charging, the current battery indicator slowly flashes. When the battery is full, the four lights are steady on. In wireless mode, after 2 minutes of button release, turn off the power display. When the battery voltage is about 3.1V, the device enters hibernation shutdown.

3. RGB Running Horse Lights:
   These lights provide an aesthetic feature for the keyboard.

4. Key Compound Function:
   The keyboard offers various combination key functions for different systems. For example, in WIN system, pressing FN+A switches to WIN system, and so on.

5. Connection Mode:

6. 2.4G Connection: Switch the power switches to ON state and press FN+2 key combination to switch to 2.4G mode.

7. Wired Connection: Plug the cable into the TYPE-C port and connect the other end to the computer. Press FN+1 to switch to wired mode.

8. Bluetooth Connection: Switch to Bluetooth modes using FN+3 and FN+4 key combinations for pairing with Bluetooth devices.

FCC Caution:
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Basic parameters

• Model : Forerunner V3Pro keyboard
• Battery parameter : 2000mAh(support charging – do not support fast charging please connect the computer to charge) V3pro-3.7-5v 250mA [max ]
• Connection mode: 2.4G connection, Bluetooth, wired
• Wireless connection distance: 10 meters (unimpeded open environment)
• Supported system: Windows, macOS,
• Product size:
  • Keyboard :
  • Height : 28.mm
  • Length :444mm
  • width : 134mm

Switch indication

Indicator light and LOGO light

• The LOGO indicator is on by default. Press the FN+L key combination to open the LOGO on the display
• To turn off the CAPS indicator and NUM indicator to turn on the CAPS indicator and NUM indicator
• If the indicator is steady on, it indicates the MAC system indicator. Press FN+S to switch to MAC
• If the MAC indicator is steady on and the WIN indicator is off, press FN+A Switch to WIN system, WIN indicator is steady on, MAC indicator is off wireless mode, press button
• After 2 minutes, the CAPS, NUM, and MAC/WIN system indicators are automatically off.

Clock

• The clock is on by default and displays the year, month and day time. Hold down FN+T key combination 3S to enter the time adjustment
• Whole mode: The slow blinking indicator on the year indicates that you can set the year, and then press
• FN+ += The year number is increased by 1. Press FN+ _- to decrease the year number by 1
• Short press FN+T to enter the year, month, hour and minute Settings in turn, and the corresponding lights flash slowly
• Indicated, long press FN+T key combination 3S again to exit the time setting; Wireless mode, button 2 minutes after the release, the clock display is closed.

Power, low voltage and charging indication

• When charging, the current battery indicator slowly flashes, when the battery is full, the four lights are steady on
• Full. Wireless mode, button release 2MIN, turn off the power display, when the battery voltage
• When it is about 3.1V, the solution enters hibernation shutdown. Wireless mode, press release 2 minutes
• After that, the clock display turns off.mode, button 2 minutes after the release, the clock display is closed.

RGB running horse lights

1. Keyboard light effect default open, 15 kinds of light effect.
2. Light effect Default streamer mode, short press the FN+APP light key to turn off or turn on the backlight.
3. Press the combination key FN+INSERT to switch the light effect mode, and the light effect is in colorful streamer, neon, Breathing, two horses and advancing, monochromatic streamer, seven-color horse racing, mixed color steady on, red, green, Switch between blue, orange, cyan, purple, white and off modes.
4. Light effect brightness 5, the default third gear; Streamer, neon, breathing, and other modes of frequency speed Degree 10 gear, default 6th gear
5. When the mode is steady on, press the combination key FN+ ” ↑” light effect brightness Add, press the combination key FN+ ” ↓” to reduce the brightness of the lamp.
6. Streamer, neon, breathing and other modes, press the combination key FN+ “←” to reduce the lamp effect speed, and press Key combination FN+ “→” light effect speed increase.
7. After the keyboard key is released for 2 minutes, the lamp function is automatically turned off.
8. When the keyboard battery low voltage is about 3.3V, the lamp performance is actively turned off.

Key compound function

Connection mode

2.4G connection

Switch the two power switches to the “ON” state, and press the FN+2 key combination on the keyboard to switch to 2.4G mode, at this point in close proximity to the receiver, can be used normally.

Bluetooth connection

Bluetooth Name (EWEADN-V3Pro)

• Switch the two power switches to the “ON” state, and press the FN +3 key combination on the keyboard to switch to
• Bluetooth 1 mode, short press FN+ 4 key combination to switch to
• Bluetooth 2 mode, then Bluetooth device
• Pairing, pairing success can be used normally.

Wired connection

Plug the cable into the TYPE-C port first, connect the other end to the computer, and press FN+1 Switch to wired mode, and the cable indicator light on the display is steady on to indicate the normal use of the keyboard.

List of items

1. Keyboard
2. 2.4G receiver
3. TYPE-C charging cable

• Licensor : Yuandao Industrial (Shenzhen) Co., LTD Room 1610, 16th Floor, Jinhao Building, No. 109, Fuyong Section, Guangshen Road, Baoan District, Shenzhen
• Manufacturer : Jiangxi JICI Technology Co., LTD Building 3, Godfrey Industrial Park, Lvbao Avenue, Qingyuan District, Ji ‘a City, Jiangxi Province
• Contact number : 0755-23089616
• Website : www.eweadn.cn
• Product implementation standard number : Mouse GB/T 26245-2010

Note : the product picture is for reference only, there may be differences with the actual, please refer to the actual prevail, please forgive me!

FAQ

Q: How do I charge the V3Pro keyboard?
A: Connect the keyboard to a computer using the provided TYPE-C charging cable.

Q: What systems are supported by the V3Pro keyboard?
A: The V3Pro keyboard supports Windows and macOS systems.

References

• EWEADN/前行者品牌官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>