CANYON CND-GPW3 Wireless Gaming Pad User Manual

: June 6, 2024
: CANYON

Table of Contents

CANYON CND-GPW3 Wireless Gaming Pad
Device overview
Technical specifications
SWITCH mode key layout
Troubleshooting
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CANYON CND-GPW3 Wireless Gaming Pad

Dear Customer!

Congratulations on purchasing the premium quality CANYON product!
We are happy to present to you our gaming accessories, which are the combination of new technology and fresh design.
Our own design bureau implements the latest trends in fashion and design, while our scrupulous quality control system ensures a long life of CANYON products.
To take full advantage of this product, we recommend you to read this manual completely.
Have a good time with our product!

Device overview

CANYON CND-GPW3 Wireless Gaming Pad device overview

CANYON CND-GPW3 Wireless Gaming Pad device overview 1

Device overview

A| Back button
B /H| Left analog stick Right analog stick
C| 8D Direction pad
D| Turbo button setting:

1. Hold the key to which you want to apply the turbo function while not releasing it, press the turbo button once.

The backlight will flash red if set successfully.

2. To cancel this function, hold the key to which you applied the turbo function and do not release it and then press the turbo key once. The backlight will turn blue

3. The following keys can be used for the TURBO function: A, B, X, Y, LB, RB, LT, RT.

E| Start button
F| Home button

Hold the «Home» button for 5 seconds to turn the device off 1.Home button is used to change the operation mode.

2. Home button can be used to exit the game and return to the home page.

G

| The function keys :A,B,X,Y

A, B, X, Y backlight LEDs. Hold down L + R for 5 seconds to turn off or turn on the LED backlight.

I| Channel LED indicators
J| Backlight

1. When starting up normally, blue backlight is on.

2. When TURBO function is activated, the red backlight is on.

K| LB/RB buttons/triggers
L| LT/RT buttons/triggers
M| USB type C
N| RESET switch

Technical specifications

PC Xinput /Dinput wireless mode connection Settings:

Press the «HOME» button, for each operation mode, LED1, LED2, LED3 and LED4 will flash in pairs.
Xinput mode: Insert the receiver into the computer USB, the controller will begin to pair with the receiver. LED1+LED4 will turn on if the connection is successful.
To switch the gamepad to the Dinput mode, please hold the HOME key for 5 seconds until LED1 + LED3 are on.

Operation modes LED:
If the controller is paired when the battery voltage is lower than 3.5 V, the LED will flash to indicate low power warning and the vibration function will not work.

PC Xinput / Dinput wired mode connection Settings:

Connect the USB cable directly to the computer USB port.
If the connection is successful the LEDs will remain on.
LED1+LED4 – Xinput mode / LED1+LED3 – Dinput mode.

CANYON CND-GPW3 Wireless Gaming Pad connection
Settings

Android wireless / wired mode connection Settings:
There are 2 connection modes: 1) Wireless mode: connect the receiver via the OTG line 2) Wired mode: connect the receiver via the OTG cable directly to the USB port of the phone, LED2 + LED 3 lights will turn on to indicate that the connection is successful, if they do not illuminate, hold the HOME key for 5 seconds until they turn on.

CANYON CND-GPW3 Wireless Gaming Pad connection Settings
1

Note:

The mobile phone or tablet must support the OTG function and use the OTG cable connection.
The current Android version does not support the controller vibration function.

Channel LED indicators:
If the controller is paired,when the battery voltage is lower than 3.5V, LED2+LED3 will flash to indicate low power.

Nintendo switch connection/pair Setting:

On your «Nintendo»,select the menu item Controller – Change Grip and Order.
Insert the receiver directly into the USB 2.0 port.
Press the «HOME» button, LED1, LED2, LED3, and LED4 will flash when paired.
When the LED(s) remain on, the connection is successful.

SWITCH mode key layout

CANYON CND-GPW3 Wireless Gaming Pad key layout

Motion sensor can support switch host and use X Y Z axial to control the game

Channel LED indicator:
when the battery voltage is lower than 3.5 V, the connected channel LED(s) will flash to indicate low power and turn off the vibration function.

Use the cable connection Settings:

On your Nintendo Switch, select the menu item» System Settings»—-»Controllers and sensors»—-» Pro Controller wired Communication» to turn the wired connection on.
Insert USB cable directly to the Nintendo switch charging dock.
When the channel LED stays on, the connection is successful.

CANYON CND-GPW3 Wireless Gaming Pad connection Settings
2

Сhannel indicators

CANYON CND-GPW3 Wireless Gaming Pad Сhannel indicators

PS3 wireless mode connection Settings:

1. Insert the receiver into the PS3 USB port.
2. Press the «HOME» button, for each operation mode LED1, LED2, LED3, and LED4 will flash in pairs, when the connection is successful they will stay on.
3. Press HOME to confirm

CANYON CND-GPW3 Wireless Gaming Pad connection Settings
3

Channel LED indicator:
When the controller is paired and the battery voltage is lower than 3.5v, the connected channel LED(s) will flash to indicate low power and turn off the vibration function.

PS3 wired mode connection Settings:

Insert the USB cable directly into the PS3 USB port.
When the LED is on, the connection is successful.
Press HOME to confirm

CANYON CND-GPW3 Wireless Gaming Pad connection Settings
4

Troubleshooting

The gamepad does not work

Check USB connection;
Try to plug gamepad into a different USB port;
Restart computer/console.
Gamepad works well when plugging into a full powered USB port. If you use USB HUB, it must have its own power supply.

The gamepad disconnects when playing a game
Check your console system is latest version or not, if you updated your system, please download our updated software.