CANYON SW-79 Smart Watch User Guide

June 4, 2024
CANYON

SW-79 Smart Watch
User Guide

GENERAL INFORMATION

The Canyon CNS SW-79 is a smart watch that connects to your phone via BT and works with the proprietary Canyon Life app. The watch is equipped with a metal case, a large screen and a convenient button-wheel.

TECHNICAL SPECIFICATIONS:

Model: CNS SW-79
Compatibility : Android 6.0 and later (smartphones with BT 4.0 and support for Google Play services), iOS 12.0 and later (iPhone 5S and later), Android GO (no notification support)
Chipset: Goodix GR5515
Memory: 256 KB RAM, 64 MB ROM
Screen: 1.69 inch, 240×280 pixels, touch, TFT, Single touch
Battery: Lithium Polymer, 180 mAh, built-in
Type of charging cable : USB Type A Recommended power supply output parameters: no more than 5.0 V / 1.0 A (charger not included) Full charge time: up to 3 hours (depending on the power source)
Active use mode: 5-7 days
Standby mode: up to 25 days
Protection degree: IP67
BT: 5.1
Sensors: accelerometer, heart rate monitor
Operating temperature: -20 °C to 60 °C
Operating humidity: 45 % to 65 %
Storage temperature: -10 °C to 40 °C
Storage humidity: 65 %
Dimensions : body – 44.4×36×9.2 mm; strap 20×255 mm
Weight: 47 grams
Materials: body – metal + plastic; strap – silicone

Complete set

  • Smartwatch
  • Charging cable
  • User manual

EXTERIOR

CANYON SW-79 Smart Watch - fig1

  1. Screen
  2. Scroll button
  3. Heart rate sensor
  4. Contacts for charging

KEY BENEFITS

  • metal body;
  • large screen;
  • convenient control with the scroll button;
  • long life without recharging;
  • customizable notifications;
  • sync with Google Fit and Apple Health;
  • heart rate monitor and accelerometer;
  • women’s calendar;
  • detailed activity statistics;
  • remote control of the camera and audio player;
  • changeable watch faces.

START OF USE

Please remove the protective film from the screen before use.

Charging. A magnetically secured cable is used for charging. Bring the cable to the contacts of the watch in a certain position so that the magnets of the cable attach to
the watch body. Connect the cable to a power source.
WARNING! The output parameters of the power supply must not exceed 5.0 V / 1.0 A.

Turning on. The watch should be at least 5% charged. To turn the watch on press and hold the button for 3-5 seconds until the dial appears.
Turning off. To turn the watch off, on the watch face screen, swipe up to go to the list of apps. Open the Settings app, tap the turning off icon and confirm the action.
Canyon Life installation. To connect your watch to a smartphone, you need to download the free Canyon Life app is available on Google Play and the App Store. Scan the QR code to go to the app store.

CANYON SW-79 Smart Watch - qr code

http://bit.ly/canyonwatch

Connecting to Canyon Life. Perform the following steps:

  1. Activate BT on your smartphone.
  2. Open the Canyon Life app.
  3. Open the “BT Devices” tab and then tap “Connect BT Device”.
  4. Place your watch and smartphone next to each other and tap “Start”.
  5. Select your watch from the list (SW-79) and tap “Add device”. After connecting to the app, the watch automatically sets the date and time.

Disconnecting from the app. Perform the following steps:

  1. Open the Canyon Life app.
  2. Select the “Settings” tab and tap “Disconnect device”. Confirm disconnection.
  3. On iPhone, you should additionally go to the BT settings and unpair the smartphone and the watch.

MAIN FUNCTIONS

Changing watch faces
On the watch face screen, tap and hold your finger on the screen. This will display a watch face selection indicator. Swipe to the right or left to select the watch face you like, and press the scroll button to set it.

CANYON SW-79 Smart Watch - fig3

Also, on a watch face screen, you can select another watch face by rotating the scroll button.

Menu navigating
On the watch face screen, swipe down to open a list of functions. It also displays the current date and a battery charge indicator.
Functions include:

| Brightness
Move the slider up and down to find a comfortable brightness level.
---|---
| Notifications
Tap to enable or disable vibration when notification is received.
| Weather forecast
Tap to go to the Weather app to see a more detailed weather forecast.
| Flashlight
Tap to use the watch screen as a flashlight.
| Theater
Tap to turn on theater mode: screen brightness will reduce and vibration will be turned off.
| Connecting
The indicator shows the status of the watch’s connection to your smartphone.
| Settings
Tap to go to the Settings app.

If the function is disabled, the button changes color to gray.
Swipe up or press the scroll button to return to the watch face screen.

On the watch face screen, swipe to the left to view your current day’s accomplishments and to quickly access some apps. Here you can view your activity and sleep duration data, measure your heart rate and blood oxygen level, and start a sports workout. The weather forecast, camera control and smartphone’s audio player are also available here.

APPLICATIONS

On the watch face screen, swipe up to go to the standard list of apps.
You can scroll through the list of applications by swiping up and down on the screen or by rotating the wheel button.
Note. Some apps require a connection to the Canyon Life app.
Sports
The app is used to start workouts. Several modes are available: walking, running, biking, volleyball, and others. After selecting a workout mode, the parameters will start to be recorded. The results of the workout will be available in the Canyon Life app after the workout is completed. You can also see your training history in the app. For accurate calculation of the parameters, be sure to specify the correct physical data (height, weight, and age) in the Canyon Life settings.
You can measure your heart rate with this app. The measurement can be activated either by launching the app or by calling the “Measure Heart Rate” function in the Canyon Life app on the “Home” tab in the “Heart Rate” section. When running the app on the watch, the measurement process takes about a minute, when running in Canyon Life, it takes about 30 seconds. You can set the period and frequency of automatic heart rate measurement throughout the day in the Canyon Life settings.
Oxygen
The watch can measure blood oxygen saturation level. The measurement will start when you open the application. When the measurement is complete, the screen will display the result and the watch will vibrate (if the vibration is on).
WARNING! The watch is not a medical device. The heart rate monitor data is not a professional medical assessment, but only an estimate one.

Notifications

The app allows you to view notifications of messages and incoming calls. The watch displays eight notifications. New notifications erase old ones. The read notifications are removed from the list. The list of applications from which the watch will receive notifications is set up in Canyon Life.
Sleep monitoring
The app displays the total duration of sleep, which consists of deep and REM sleep phases.
Women’s Calendar
To activate the application, you should select “Female” in the “Gender” setting when entering the physical parameters in Canyon Life and set the calendar. When an event occurs, a notification will be displayed.
Flashlight
When you launch the app, the watch screen displays a white background at maximum brightness.
Camera
The app is used to control your smartphone’s camera remotely. Open Canyon Life and select “Remote Camera Control” in the settings. After this, the application on the watch will start automatically. Tap the watch screen to take a photo on your smartphone.
Player
The app is used to control the audio player running on your smartphone remotely. You can select the next or previous song, start or stop playback.
Breathing
The app is used for breathing exercises in the form of a series of deep inhalations and exhalations. During the exercise, repeat breathing in and out after the image on the screen.
Weather
The app displays the weather forecast for the current and upcoming days.
Settings
The list of settings includes a stopwatch, alarm clock, brightness, vibration, theater mode, reset and turn off functions, and a QR-code link to download the Canyon Life app.

SAFE USAGE RULES

  1. Do not use power supplies that do not meet the requirements (see the description in the datasheet).
  2. Do not press the screen with sharp objects or apply too much pressure.
  3. Do not take the watch apart or try to repair it yourself.
  4. Do not drop, throw or bend the watch.
  5. To avoid injury, do not use the watch if it is cracked or otherwise damaged.
  6. Use a dry cloth or a cloth dampened with a little water for cleaning (do not use aggressive chemicals or cleansers). Clean only after disconnecting from the power supply.
  7. Do not place the watch near heaters or open flames. Do not expose them to direct sunlight for long periods of time.
  8. Do not swim or dive with the watch, or place it under strong jets of water.

TROUBLESHOOTING

Problem Solution
The watch does not turn on Connect the USB cable to charge the device and

wait a few minutes. Check the cable and charger
The screen is not responding to touch properly| Make sure you remove the protective film from the screen
The watch is not detected by the smartphone| Make sure that BT is activated on your smartphone. Make sure the watch is not connected to another smartphone
The watch is detected by the smartphone, but the connection is not made| Turn the watch off and then on again. Turn BT off and then on again on your smartphone. Restart your smartphone
The Canyon Life app does not detect the watch| Make sure you connect the watch in the app, not in the BT settings
There are constant disconnections from the smartphone| Allow the application to run in the background and remove any other restrictions

WARRANTY OBLIGATIONS

The warranty period begins on the date of purchase from a seller authorized by Canyon. The date shown on your sales receipt or on the delivery note is taken as the date of purchase. During the warranty period, repairs, replacements or refunds are at the manufacturer’s discretion.
To be eligible for warranty service, the product must be returned to the Seller at the place of purchase along with proof of purchase (receipt or consignment note).
Warranty – 2 years from the date of purchase. The service life is 2 years.
For more information about using and the warranty, visit canyon.eu.

DISPOSAL INFORMATION

These symbols indicate that you should follow the Waste Electrical and Electronic Equipment (WEEE) regulations when disposing of the device. According to the regulations, the device, its batteries and accumulators, and its electrical and electronic accessories must be disposed of separately at the end of their service life.
Do not dispose of the device together with unsorted municipal waste, as this would be harmful to the environment.
To dispose of the device and its batteries, return them to the point of sale or take them to your local recycling center. For more information about recycling of this unit, contact our local household waste disposal service.

OTHER INFORMATION

Manufacturer: ASBISC ENTERPRISES PLC, Agios Athanasios, Diamond Court, 43 Kolonakiou Street, 4103 Limassol, Cyprus, asbis.com.

Country of manufacture : China.
A complete user manual for the CNS SW-79 is available at canyon.eu in the section “Smart Watches”. It provides a more detailed description:

  • the setting and operation of the watch;
  • connection to Canyon Life and the functions of the app;
  • information on maintenance and repair;
  • warranty conditions;
  • storage, transportation and disposal conditions.

All trademarks and brand names are the property of their respective owners.
The device complies with the requirements of the Radio Equipment Directive 2014/53/EU (see the full user manual for details).
More information at canyon.eu/certificates.

WARRANTY CARD
Product name:
Model: ____

Serial Number: __
Purchase date: __
Dealer: __

Dealer stamp
Customer signature

CANYON SW-79 Smart Watch - icon1

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals