CANYON TWS-1 True Wireless Stereo Headset User Manual

: June 4, 2024
: CANYON

Table of Contents

CANYON TWS-1 True Wireless Stereo Headset
Package
Device overview
Charging
Features
Pairing
Troubleshooting
SAFETY INSTRUCTIONS
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CANYON TWS-1 True Wireless Stereo Headset

CANYON TWS-1 True Wireless Stereo Headset product-img

Package

$CANYON TWS-1 True Wireless Stereo Headset fig $1$$

Device overview

$CANYON TWS-1 True Wireless Stereo Headset fig $2$$

Charging

$CANYON TWS-1 True Wireless Stereo Headset fig $4$$

Features

Bluetrum BT 5.0
Profiles: HFP, HSP, AVRCP, A2DP
Handsfree function
Automatic pairing
Up to 12 hours of work with charging case
Time of recharging the charging case – 2 hour
Battery capacity 45 mAh (earbud), 300 mAh (charging case)
Charging input: USB Type-C
Single/DoubleEarphones
Wearing Style
Voice assistant

Pairing

$CANYON TWS-1 True Wireless Stereo Headset fig $3$$

Take the earbud/earbuds from the case, the lights will flash red and blue indicating earbuds are turned on. After 1s the lights flash blue indicating the earbud/earbuds are automatically paired with each other. Go to Bluetooth settings of your Bluetooth audio device and select Canyon BT headset. The earbud/earbuds will be paired with your device automatically. When it is successfully paired, the light will turn off.

Battery indicator

Shows the battery level remaining when the earbuds are paired with your smart phone.

Touch button:

Play/Pause music : Press twice on L/R earphone.
Next track : Press 3 times on L/R earphone.
Voice assistant function: Press and hold for 2 sec on L/R earphone.
Receiving or hang up call : Press twice on L/R earphone.
Reject call: Press and hold for 2 seconds on L/R earphone.

Reset to factory settings:

Take out the earbuds from the case and unpair the earbuds in Bluetooth settings
Quick press any one earbuds five times and then two earbuds auto power off. It finish clearing the paring record.
Pair the earbuds in Bluetooth settings as described in “Pairing” section

Charging the earbuds

To charge your earbuds, simply slide each earbud into its corresponding dock until the earbud is fully seated. The earbuds will begin charging, indicated by a solid red LED glow on the earbud and solid blue LED glow on the charging case. When the earbuds are fully charged, the LED on the earbuds will turn blue, then turn off after 10s

Charging the charging case

To charge your charging case, plug the USB Type-C charging cable (included) into the slot on the bottom of the charging case. Plug the other end into a USB adapter.
The case will automatically begin charging, indicated by a red LED Battery Indicator. When it is fully charged, the LED will be solid red.

Troubleshooting

Fault:	Remedy:

The headset cannot connect

| Ensure that the earbuds are charged. Ensure that the devices are connected and the Bluetooth function in your device is ON. Switch the earbuds off and then switch them on again. Ensure that the headset is specified as

a sound output device. Reset to factory settings and reconnect.

Distorted sound

| Move the earphones closer to the device.

Check availability of wireless signals, which can make interferences, near your headset and device.

Adjust the sound volume on your earphones and device. Switch the earphones off and then switch it on again.

Reset to factory settings and reconnect.

If the above actions cannot solve your problem, contact the support service at Canyon http://canyon.eu/ask-your-question/

SAFETY INSTRUCTIONS

Read and follow all instructions before the product use.

Protect the device against the high humidity as well as water and dust penetration. Do not use the device in very humid and dusty premises.
Protect the device against heating: Do not use it near heating devices and avoid direct sunlight.
The product shall be connected only to a corresponding power source. The type of the corresponding power source is specified in the operating manual.
Never spray liquid detergents. Use only dry clothes for device cleaning.

WARNINGS

The use of the earphones cannot be used with the high volume level within a long time period can result in the temporary or continuous hearing loss.
The device dismantling is prohibited. We do not recommend to carry out any repair of this device. Unauthorized repairs result in warranty loss. According to local regulations, your product and/or its battery must be disposed of separately from household waste. When this product has reached the end of
its service life, take it to a recycling facility designated by local authorities.

WARRANTY

The warranty period begins from the date of the product purchase from the Seller, authorized by Canyon. The date specified in your sales receipt or delivery note is the purchase date. Duing the warranty period, any repair, replace or repayment of a purchase value is made at the discretion of CANYON. To provide the warranty service, the product shall be returned to the Seller purchase location together with its proof of purchase (sales receipt or delivery note).
The warranty period is 2 years after the product purchase by a customer. Service life: 2 years. For use and warranty details, visit http://canyon.eu /warranty-terms/
Manufacturer: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court 4103 Ayios Athanasios http://canyon.eu

All other products names and trademarks are property of their respective owners. www.canyon.eu/certificates