MATEKSYS F722-WPX Flight Controller User Guide
- June 6, 2024
- MATEKSYS
Table of Contents
MATEKSYS F722-WPX Flight Controller
QUICK START GUIDE
MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
Baro: DPS310 (I2C)
OSD: Pixel OSD/FrskyOSD (Uart6)
Blackbox: MicroSD socket (SPI)
6x UARTs(5 Spare) with built-in inversion
1x Softserial_Tx option
10x PWM outputs
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
1x SH1.0_6pin connector (4V5/G/TX4/RX4/SDA/SCL) for GPS/compass
1x SH1.0_6pin connector for external USB and buzzer
Switchable Dual Camera Inputs
Switchable Vbat for Camera/VTX
6~30V DC IN (2~6S LiPo)
132A high-precision Current Sense
BEC 5V 2A for FC & Peripherals
BEC Vx 5A for servos, 5V/ 6V option
Vbat filtered output 1A for VTx and Camera
LDO 3.3V 200mA
INAV Target MATEKF722WPX
LAYOUT
INAV Target: MATEKF722WPX
*** CLI defaults after reflashing
Wiring (INAV Airplane)
S1 & S2 for motors
S3 – S10 for servos
Vbat Power / Camera switch
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>