TELTONIKA RUT850 Router User Guide

: June 6, 2024
: teltonika

Table of Contents

TELTONIKA RUT850 Router
HARDWARE INSTALLATION
LOGIN TO DEVICE
TECHNICAL INFORMATION
SAFETY INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TELTONIKA RUT850 Router

https://wiki.teltonika-networks.com/

FRONT VIEW

TELTONIKA RUT850 Router front view

BACK VIEW

TELTONIKA RUT850 Router BACK VIEW

POWER SOCKET PINOUT

TELTONIKA RUT850 Router POWER SOCKET PINOUT

HARDWARE INSTALLATION

Push the SIM holder button with the SIM needle.
Pull out the SIM holder.
Insert your SIM card into the SIM holder.
Slide the SIM holder back into the router.
Attach all antennas.
Connect the power adapter to the socket on the front of the device. Then plug the other end of the power adapter into a power outlet.
Connect to the device wirelessly using SSID and password provided on the device information label.

TELTONIKA RUT850 Router HARDWARE INSTALLATION

To enter the router’s Web interface (WebUI), type http://192.168.1.1 into the URL field of your Internet browser.
Use login information shown in image A when prompted for authentication.
After you login, you will be prompted to change your password for security reasons. The new password must contain at least 8 characters, including at least one uppercase letter, one lowercase letter and one digit. This step is mandatory and you will not be able to interact with the router’s WebUI before you change the password.
When you change the router’s password, the Configuration Wizard will start. The Configuration Wizard is a tool used to setup some of the router’s main operating parameters.
Go to the Overview page and pay attention to the Signal Strength indication (image B). To maximize the cellular performance try adjusting the antennas or changing the location of your device to achieve the best signal conditions.

TELTONIKA RUT850 Router LOGIN TO DEVICE

TECHNICAL INFORMATION

Radio speciﬁcations

RF technologies| 2G, 3G, 4G, WiFi, GNSS
Max RF power| 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20 dBm@ WiFi
Bundled accessories **speciﬁcations*
Power adapter| Input: 0.4A@100-240VAC, Output: 9VDC, 1A, 4-pin plug
Mobile antenna| 690/900/1800/1900/2100/2700 MHz, 50 Ω, VSWR < 3.2, gain 3.5 dBi, omnidirectional, FAKRA D female connector
GNSS antenna| 1575.42~1602MHz,2.2-5VDC,VSWR<1.5,activetotalgain**26dB(typ.),RHCPpolarization,FAKRACfemaleconnector

Order code dependent.
Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.

SAFETY INFORMATION

RUT850 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

Hereby, TELTONIKA declares that this RUT850 is in compliance with the essential requirements and other relevant provisions of Directive CE/RED.
The full text of the EU declaration of conformity is available at the following internet address: https://wiki.teltonika- networks.com/view/RUT850_CE/RED
Instruction Manual: Connect the power adapter to turn on the device. Open 192.168.1.1 in your web browser to configure it. More information on https://wiki.teltonika-networks.com/
This sign means that all used electronic and electric equipment should not be mixed with general household waste.
This sign means that product meets the requirements of the applicable EU directives.
www.teltonika-networks.com