TaoTronics Air Purifier TT-AP001 User Manual

TaoTronics Air Purifier TT-AP001

www.taotronics.com

E-mail:
support@taotronics.com
MANUFACTURER
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/pages/user-manual

Warnings

This product should be used only in accordance with the specifications outlined in this User Guide. Usage other than what has been specified here may result in serious injury.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before using the appliance.
• IMPORTANT – This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to rig this safety feature.
• To avoid fire or shock hazard, plug the appliance directly into a right AC electrical outlet.
• Keep the cord out of heavy traffic areas. To avoid f fire hazard, NEVER put the cord under rugs, near heat registers, radiator, stoves, or heaters.
• To protect against electrical hazards, DO NOT immerse in water or other liquids. Do not use near water.
• Children cannot recognize the hazards associated with the usage of electrical appliances. For this reason, always supervise children when they are near the unit.
• Always unplug the air purifier before moving it, opening the grille, changing filters, cleaning or whenever the air purifier is not in use. Be sure to pull by the plug, not the cord.
• NEVER drop or insert any objects into any openings.
• DO NOT run the cord under carpeting.
• DO NOT cover the cord with throw rugs or similar coverings.
• DO NOT route the cord under furniture or appliances. Arrange the cord away from traffic area and where it will not be tripped over.
• DO NOT operate any appliance with a damaged cord or plug, if the motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Send to Customer Service for assistance.
• Use appliance only for intended household purposes as described in this manual. Any other use is not recommended that may cause fire, electric shock, or injury to persons.
• DO NOT use outdoors.
• DO NOT place anything on top of the unit.
• NEVER block the air openings, grille/outlets or place the unit on a soft surface such as a bed or sofa, as this could cause the unit to tip over, blocking the air inlet or outlet.
• DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only.
• To reduce the risk of fire or electric shock, do not use this purifier with any solid-state speed control device.

Specifications

Product Diagram

3-In-1 True HEPA Filter
Improve your indoor air quality with our new Air Cleaning System. Multiple levels of cleaning include a combination of Pre-filter that traps big particles, Activated Carbon Filter that reduces odour, and True HEPA filter that captures micro particles.

1. The Pre-filter filters out abrasive substances as a defence for the True HEPA filter.
2. The Activated Carbon Filter removes large dust particles, pet dander, and household odor.
3. True HEPA Filter eliminates 99.97% of pollutants as small as 0.3 m or larger pollen and dust mites and filters air pollution of PM 2.5.

Before Operating the Air Purifier

1. Carefully remove your air purifier from the packaging box and plastic bag.
2. Place it on a firm, level and flat area.
   • For proper air flow, locate the unit at least 1 foot / 30 cm away from any wall or furniture.
   • Make sure none of the grilles are blocked.
3. Plug the power adapter into an appropriate voltage AC outlet.
   IMPORTANT: When moving the air purifier, always lift the unit firmly by both hands.

Operating the Air Purifier

Power / Filter Reset Button
Press to turn on / off the unit, the LED light and corresponding mode indicators will turn on / off. The FILTER RESET indicator will turn on red to remind you to change the filter, press and hold the POWER / FILTER RESET Button for 5 seconds to turn off the LED indicator. Change the filter, turn on the purifier again to start working normally.

Note: Refer to “Installing and Removing the Filter” part for more information about the filter reset function.

Light Button
When the purifier is on, press to adjust 3 levels of the LED light brightness.

Sleep Button
When the purifier is on, press to activate SLEEP mode.

Note: In Sleep mode, only the SLEEP button indicator will stay on, and the unit will run in low speed.

Fan Speed Button
Press to adjust the fan speed when the unit is in operation and cycle through LOW I / MEDIUM II / HIGH III / TURBO settings.

Note:

• In turbo mode, all the three FAN SPEED LED indicators will turn on.
• When the unit is not in use, please switch it off and unplug from power.

Installing and Removing the Filter

Filter Reset Indicator
The flickering FILTER RESET LED indicates that it is time to replace the filter. Replace the filter according to the directions below, then press and hold the POWER / FILTER RESET button for 5 seconds to reset the light, and it will stop flickering.
Replace the filter every 3 to 6 months depending on the usage.

1. Lift the unit upside down.
2. Remove the base by unscrewing the screw cap.
3. Take out the dirty filter and replace with a new one.
4. Reattach the base to the unit and fasten it with the screw cap.

Cleaning and Maintenance

Clean the purifier at least once every month with a clean, dry, soft cloth. More frequent cleaning may be required depending on environmental conditions.

Note:

• Do NOT stick any foreign objects or your fingers inside of the unit.
• Do NOT use gasoline, benzene, and other abrasive or harsh cleaners, etc. on and/or in the unit while cleaning as they will damage the product.
• NEVER use alcohol or other solvents.

Maintaining the Filters
The True HEPA filter should be cleaned once each month by a vacuum cleaner.

Note:

• Filter should be replaced at least once each 3 to 6 months. More frequent cleaning and replacing may be required depending on environmental conditions.
• The air purifier works the best in a closed environment. Its performance may be compromised in a well-ventilated room.
• Air the filters under the sun for an hour before using it again if the purifier has not been used for a long time.

Warranty and Service

This product is covered with TaoTronics product and labor warranty for 12 months from the date of its original purchase.
If any problems occur, please contact the TaoTronics Customer Care Centre via the contact information listed in this User Guide.
We can only provide after sales service for products that are sold by TaoTronics or TaoTronics authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.

References

• TaoTronics Official Site - Technology Enhances Life
• User Manual - TaoTronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>