CaterChef 688.087 Electric Rice Cooker User Manual
- October 27, 2023
- CaterChef
Table of Contents
- CaterChef 688.087 Electric Rice Cooker
- FOUTCODES
- TECNICAL SPECIFICATIONS
- TRANSPORT AND STORAGE
- SAFETY PRECAUTIONS AND USAGE ENVIRONMENT
- SAFETY INSTRUCTIONS
- USAGE INSTRUCTIONS
- CLEANING AND MAINTENANCE
- SIMPLE TROUBLESHOOTING
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CaterChef 688.087 Electric Rice Cooker
FOUTCODES
Fout code | Symptomen | Oorzaak | Oplossing |
---|
E1
| ****
Verbroken schakeling in de bodem
| De aansluiting van de sensor in de bodem is los| Verbind de aansluiting
De draden van de sensor in de bodem zijn los| Herstel de draden
De sensor in de bodem is stuk| Vervang de sensor
Printplaat is stuk| Vervang de printplaat
E2
| ****
Kortsluiting in de bodem
| Kortsluiting bij de sensor in de bodem| Vervang de sensor
De sensor in bodem is stuk| Vervang de sensor
Printplaat is stuk| Vervang de printplaat
E3
| ****
Oververhit
| Het contact van de kookpot met het verwarmingselement is slecht| Vervang de
kookpot
Vuil tussen de kookpot en verwarmingselement| Verwijder het vuil
E4
| ****
Verbroken schakeling in de deksel
| De aansluiting van de sensor in de deksel is los| Verbind de aansluiting
De draden van de sensor in de deksel zijn los| Herstel de draden
De sensor in de deksel is stuk| Vervang de sensor
Printplaat is stuk| Vervang de printplaat
Draden bij het schanierpunt van de deksel zijn verbroken| Herstel de draden
E5
| ****
Kortsluiting in de deksel
| Kortsluiting bij de sensor in de deksel| Vervang de sensor
De sensor in deksel is stuk| Vervang de sensor
Printplaat is stuk| Vervang de printplaat
Als het apparaat niet werkt of is beschadigd, controleer dan het volgende:
- Of de stekker in het stopcontact zit;
- Of de stekker en/of het snoer beschadigd zijn.
Indien het probleem nummer 2 betreft of indien er een ander probleem optreed, dient u contact op te nemen met uw lokale dealer of erkende servicemonteur.
Volgens de richtlijn betreffende afgedankte elektrische en elektronische apparatuur (AEEA) moet AEEA gescheiden ingezameld en verwerkt worden. Als dit product in de toekomst ooit afgedankt moet worden, doe dit dan NIET via het huishoudelijk afval. Breng dit product indien mogelijk naar een afvalstation.
Before starting up, please read this manual carefully in order to ensure the correct and safe installation and usage. Damage caused by not following the instructions of this manual will always invalidates the warranty.
TECNICAL SPECIFICATIONS
Pictures for reference only, specification shall be subject to real object.
CaterChef would like to emphasize that this instruction manual needs to be
readed carefully before usuge and should be stored for later use.
MODEL| DIMENSIONS (CM)| VOLTAGE (V)| HERTZ
(HZ)| POWER (W)
---|---|---|---|---
688.087| 48 x 55 x 51(H)| 230| 50/60| 2500
For more information we would like to ask you to go to our website
www.emga.com.
You could for example search on item nr. and go to downloads.
Here, you will be able to find more information like the exploded views, the
spare part lists and CE-certificates.
TYPE PLATE
The type plate (the picture is an example) is located on the back of the
device. You are requested not to remove it.
The type plate can for example be used to determine, when the item was
purchased (view PO) and from which production line (view SN) it originates.
This information may be essential with regard to warranty.
It also contains important information such as the voltage and power supply
which determines the ability to connect the device safe.
TRANSPORT AND STORAGE
As long as the products are packed, please make sure you never place them
upside down.
This could damage the appliance. During transport, the product should be
placed carefully.
Make sure you prevent any drastic vibration during transport. You should never
place or store this product outside or in open air for a longer period of time
than a few hours (not even packed). It should be stored in a well-ventilated
warehouse without corrosive gasses. When, in case of an emergency, you need to
store them temporarily outside, you should take measures to protect them from
rain or moisture.
SAFETY PRECAUTIONS AND USAGE ENVIRONMENT
-
Remove all packaging material and any protective film from the device.
-
This product should be placed in a balanced and well ventilated spot and its left and right sides should be free from obstacles for more than 10cm. It’s back-side should be free from the obstacles (like a wall etc.) for more than 20cm.
-
During operation, do not place any stuff in front of the appliance to make sure it could be operated at any time needed.
-
Do not place the appliance on a carpet, a tea towel, tablecloth (vinyl) or another surface that cannot withstand high temperatures. This could cause fire hazard.
-
Do never cover the appliance with foil; this could cause overheating and therefore danger.
-
Never plug the power cord into an extension cord or wall outlet to which multiple devices are connected.
-
Never put the plug in the socket with wet hands.
-
When disconnecting the device from the power, never pull from the cord, only the plug.
-
The power pressure of this equipment should conform to the supply voltage of this product.
-
The user should install the suitable power switch, fuse and leakage-protector near to the equipment.
-
Before usage, this equipment must be connected (safe) to a grounded socket.
-
Before starting up, you should check whether the socket you want to use is grounded.
-
Ensure whether all the connections of all the electric elements of the product are firm or not, and whether the safety grounding is reliable or not.
-
When you change the power cable, you should select the same model cable and: it is only allowed to let a professional electrician do this.
-
Never use other parts than the ones which are from CaterChef.
CaterChef is not taking any responsibilty for damage caused by the use of other (non-related) parts. -
If you need to (re)connect, repair or maintain the applaince, do not do this by yourself.
This is forbidden. This must always be done by a professional electrician. -
If there are any abnormal phenomenons during usage, you must stop the appliance directly.
After checking you can continue to use it as long as it is safe. Do not repair the appliance by yourself.
This should always been done by a technical professional. -
During operation or cooling down: always keep the appliance out of reach of children.
This, mainly to prevent burning injuries.
DEGREASE:
Before operating for the first time, clean the device with warm water, a wet
cloth and a small amount of detergent. Do not rinse the appliance under the
tap, this could cause serious damage to the appliance.
In addition, make sure that you have dried it properly before you start
operating the device.
FUNCTIES VAN HET BEDIENINGSPANEEL
SAFETY INSTRUCTIONS
-
Never leave the area around the appliance during use.
(Use also includes the cooling down period) -
Never move the appliance during use.
-
Never touch the inner pan during use.
-
The device should only be used for its intended purpose.
-
Cooling down: After usage the appliance needs to cool down for a minimum time of 30 minutes.
To prevent any burning injuries or other danger, do not touch, move or use the appliance during this period of time. -
After usage, turn off the switch.
-
After usage the electricity needs to be cut from the socket to prevent fire hazard.
This to prevent short circuit or danger. -
When you move the product from its place, always pick it up from the lower side of the appliance.
Never pick it up from the upper side (baking tray) to prevent any damage to the appliance. -
Do not touch the high temperature areas like steam hole or it will cause scald.
-
Attached aluminium cover can be removed for cleaning.
When the silicon cup falls off, please press it back in the correct direction. -
Do not open the cover during cooking. This could cause uncooked rice and burning injuries.
USAGE INSTRUCTIONS
- Correct way for weighing rice.
- Put the right amount of rice in the inner pot.
- Wash the rice.
- Add water following to the water scale line.
- Close the top cover and turn the power ON.
- Press “Power” button, the display screen light will illuminate
- Choose: “Short Grain Rice, Long Grain Rice or Porridge/soup”
- The rice cooker will countdown the final 10 minutes.
Once rice is finished, the rice cooker will beep and automatically switch to “keep warm”.
CLEANING AND MAINTENANCE
Step 1: After usage, the device must first be switched OFF, after which
you must remove the plug from the socket. Always do this in the order
described to prevent short circuit or other possible dangers.
Step 2: Clean the parts and the device with warm water, a wet cloth and a
small amount of cleaningdetergent and then dry it thoroughly. Do not use
benzine, thinner, scouring brush or polishing powder to clean the device.
Outer body, Top Cover
- Clean it by using a dry and soft towel.
- Do not use kitchen abstergent.
- Clean the top cover every time after use.
- The metal on the inside may discolor or stain. This is harmless to health.
Inner pot, inner aluminium cover
- Clean with a soft cloth or sponge and detergent.
Big measure cup, Rice scoop
- Clean with a soft cloth or sponge and detergent.
The heating plate, sensor
- A grain or dirt adhesion? gently rub with fine sandpaper, then wipe with a dry cloth.
-
Pay attention! Do not rinse the device with water (don’t wash it by using the tap).
This could cause damage to the device and could therefore lead to dangerous situations; -
Never clean the device with a stainless steel brush. This causes scratches and damages to the device;
-
Use a vacuum cleaner to (gently) remove dirt and debris from the air-ventilation-grille;
-
Always store the appliance inside and keep it dry;
-
Before maintaining the appliance, always make sure you have removed the plug from the socket.
SIMPLE TROUBLESHOOTING
Failure phenomenon | Reason | Exclude |
---|---|---|
There have a lot of steam leakage out of the cover side | 1. The vent hole |
blockage.
2. The sealing ring deformation.
| 1. Clean vent hole.
2. Contact with seller for spare part.
Pilot lamp or display screen unworking
| 1. No power or power off.
2. display screen fault.
3. The plug is not in the right place.
4. Button switch did not press.
| 1. Connect the power supply.
2. Contact with the professional technical servers.
3. Reinsert the power supply.
4. Press switch button.
The heating plate does not heat
| 1. The plug is not inserted.
2. Heating plate fault.
3. The fuse cut off.
| 1. Re insert the power supply.
2. Contact with the professional technical servers.
3. Contact with the professional technical servers.
Rice cooked incompletely
| 1. Wrong rate of rice and water.
2. Sensor fault.
3. The inner pot cannot be placed correct.
| 1. Adjust the rate of rice and water according to instruction.
2. Contact with the professional technical servers.
3. Replace the inner pot.
Cooked Rice dry and brown.
| 1. Objects between the inner pot and the heating plate.
2. Rice should be fully elutriation.
| 1. Clean the bottom of inner pot, the surface of heating plate and sensor.
2. 2.Rice should be washed adequately.
Abnormal taste after keep warm.
| 1. Plug loose or power failure.
2. Attached aluminium cover missed.
| 1. Do not power off during keeping warm.
2. Aluminum cover attach.
ERROR CODES
Error code | Error item | Anlysis | Methods |
---|
E1
| ****
Open circuit in the bottom
| The connection of sensor in bottom loose| Tighten the connection
The wires to sensor in bottom cut off| Repaire the wire
The sensor in bottom is broken| Change new sensor
PCB is broken| Change new PCB
E2
| ****
Short circuit in the bottom
| short circuit on sensor in bottom| Change new sensor
the sensor in bottom is broken| Change new sensor
PCB is broken| Change new PCB
E3
| ****
Overheat
| The contact of cooking pot and heating element is poor| Change new cooking
pot
Dirt between cooking pot and heating elemen| Clean up the dirt
E4
| ****
Open circuit in the lid
| The connection of senor in the lid loose| Tighten the connection
The wires to sensor in the lid cut of| Repaire the wire
The sensor in the lid is broken| Change new sensor
PCB is broken| Change new PCB
Wires in the lid connection place is broken| Repaire the wire
E5
| ****
Short circuit in the lid
| Short circuit on sensor in the lid| Change new sensor
The sensor in the lid is broken| Change new sensor
PCB is broken| Change new PCB
If the appliance does not work or is damaged, check the following:
- Whether the plug is in the socket;
- Whether the plug and/or the cord is damaged.
If it is nr. 2 or if another problem occurs, contact your local dealer or
authorized service technician.
According to Waste of Electrical and Electronic Equipment (WEEE) directive,
WEEE should be separately collected and treated. If at any time in future you
need to dispose of this product please do NOT dispose of this product with
household waste. Please send this product to WEEE
collecting points where available.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>