CaterChef 508.008 Hot Dog-Sausage Warmer Instruction Manual

*Model No.: 508.008
HOT DOG/SAUSAGE WARMER
Instruction Manual**

 General Instructions

Read carefully the instructions given in this booklet. Before connecting the appliance make sure that the data shown on the technical plate (fig.2), corresponds with that of the mains power supply. Before carrying out any operation  insulate the appliance from the mains power supply. The installation must he carried out by professionally trained
personnel in accordance with the instructions of the manufacturer and current regulations. The Manufacturer declines all responsability for:

• Any damage resulting from ignoring the instructions for installation and use or from irregular use of the appliance.
• Any inaccuracies contained in this booklet due to copying or printing errors.

The Manufacturer reserves the right to make alterations thought useful to the product, without changing its basic characteristincs.

Technical data

| CS300 / CS400
---|---
Dimensions en mm| 400 x 300 x 400H
Puissance| 1000 W
Branchement| 230 V 1N

Installation instructions

• The identifying and technical plate is fixed to the back of the appliance (fig.2).
• Remove the protective film.
• ELECTRICAL SAFETY RULES:

Please observe these essential rules:

• the mains voltage and that on the technical plate must be the same;
• connection must be to a REGULATION earthed socket;
•  connection must be to an equipotential system;

The electrical connection must be carried out by trained personnel in accordance with electrical norms.
The power cable must be positioned so that no part of it reaches a temperature by 50°C. Before installation make sure that the socket or switch used can be easily reached when the apliance is in place.
CAUTION: PRODUCER DECLINE ALL RFSPONSABILITY IF THESE SAFETY RULES ARE NOT OBSERVED.

 Instruction for use

1. The appliance is intended for collective use and must be used by properly trained personnel.
2. Before switching on the machine for the first time, thoroughly clean off the industrial oils.
3. Before switching on the machine, pour water into the wurstels conteiner.

 Starting up

1. Put the plug into the power socket.
2. Turn the thermostat (A fig.1) until the temperature setting required is reached. The heating light (B fig.1) will come on and will go off when the set teparture is reached.
3. Now the appliance is ready to be used.

Turning off

1. Put the thermostat (A fig.2) into position “0”, and check that the thermostat light (B fig.2) is extinguished.
2. NOTE: if the plug remains inserted the appliance is still live.

Maintenance and cleaning

Disconnect the appliance and wait until it has cooled down before cleaning it. Clean using a damp cloth with a non-abrasive cleaning product or a product made specifically for cleaning stainless steel.

 Safety instructions

• If the cable is damaged it must be replaced at once by qualified personnel.
• Do not touch the appliance with wet hands.
• Protect the appliance from harsh weather conditions (rain or strong sunlight).
• Disconnect the appliance after each time it is used or when it is cleaned.
• Keep it out of the reach of children.

Model: CS400

Voltage: 230 V 1N~
Tension: 50/60 Hz.
Power: 1000 W
Serial Nr: ///
MMAADDEE IINN IITTAALLYY

508008 G21EFD

Documents / Resources

| CaterChef 508.008 Hot Dog-Sausage Warmer [pdf] Instruction Manual
508.008 Hot Dog-Sausage Warmer, 508.008, Hot Dog-Sausage Warmer, Sausage Warmer, Warmer
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>