2CONNECTS CTSFA004.2 Steering Wheel Control Interface Instructions

2CONNECTS CTSFA004.2 Steering Wheel Control Interface345

ABOUT THIS PRODUCT

CTSFA004.2
CAN-Bus Steering Wheel Control Interface for Fiat, Citroen, Peugeot and Vauxhall vehicles with VDO original stereo and Mini ISO connector.
WIRING COLOUR CODES

• Purple
  Right Rear Speaker +

• Purple/Black
  Right Rear Speaker –

• Green
  Left Rear Speaker +

• Green/Black
  Left Rear Speaker –

• Grey
  Right Front Speaker +

• Grey/Black
  Right Front Speaker –

• White
  Left Front Speaker +

• White/Black
  Left Front Speaker –

• Yellow
  Permanent 12V

• Black
  Ground

• Red
  Ignition 12V

• Orange
  Illumination

• Green
  Park Brake

• Pink
  Speed Pulse

• Purple/White
  Reverse Gear

• Blue
  Amp Remote

PRIOR TO INSTALLATION

Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. Please ensure that the correct tools are using during the installation to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product.

TECHNICAL SUPPORT

Connects2 Ltd. want to provide a fast and suitable resolution to any problems encountered during installation of this product. To get in touch with our dedicated technical support team, please fill in a ticket at support.connects2.com and provide as much information as possible.

FITTING GUIDE

1. Remove and disconnect the original head unit.

2. Connect the 12 way molex connector of the head unit patch lead (supplied separately) to the interface.

3. Connect the opposite end of head unit patch lead to the head unit steering wheel control input on the back of the aftermarket head unit.
   NB: This may be a 3.5mm jack plug or a wire input depending upon the head unit brand being fitted. Please see the head unit installation manual for further information on where to connect.
   Important: This step must be completed before connecting power to the interface. Failure to so do may result in no steering wheel control function.

4. Connect the 14 way molex connector to the interface

5. Connect the male power/speaker ISO harness to the female power/speaker ISO har-ness from the aftermarket head unit. For aftermarket head units without an ISO connector, please refer to “Wiring Colour Codes” on Pg. 2.
   FITTING GUIDE

6. Connect the female vehicle specific connectors on the harness to the male vehicle connector from the vehicle. Test head unit for correct operation.

STEERING WHEEL CONTROL FUNCTIONALITY

Original Button  Function

• Mute
  Mute

• Window Icon
  Hang Up

• Plus Icon
  Volume +

• Minus Icon
  Volume –

• Up Arrow
  Track +

• Down Arrow
  Track –

• SRC
  Source

• Phone
  Pick Up

Example Steering Wheel Control Configuration
(Actual configuration may differ depending on vehicle model)

www.connects2.com

References

• Connects2

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>