INSIGNIA NS-HZ331 HDMI to RCA Converter User Guide
- June 6, 2024
- Insignia
Table of Contents
INSIGNIA NS-HZ331 HDMI to RCA Converter
PACKAGE CONTENTS
- HDMI to Analog Converter
- Power Adapter
- Quick Setup Guide
FEATURES
- Standard HDMI input accepts signals up to 1080p from devices like Blu-ray players, cable/satellite boxes, video game systems, and more.
- RCA output signal compatible with virtually all TVs and displays with an RCA input.
- Custom audio/video conversion circuitry for the best sound and picture quality.
- Supports NTSC TV format.
SETTING UP YOUR CONVERTER
Note : Before you install this device, turn off the audio/video device that you are connecting.
- Connect an HDMI cable (not included) to the HDMI IN port on the converter, then connect it to an HDMI output on the device you want to convert.
- Connect an AV cable (not included) to the OUTPUT port on the converter, then connect it to the AV IN port on your TV or monitor.
- Connect the power cable to the DC jack on the converter, then plug the adapter into a wall outlet. The power indicator lights green.
- Turn on the connected devices and begin playback. If you are not getting audio or video, check the connections and settings to make sure that they are all correct.
IMPORTANT SAFETY INFORMATION
- Indoor use only.
- There are no user serviceable parts. Do not open the housing.
- Do not use in a high humidity environment.
- Use the included power adapter only.
SPECIFICATIONS
Dimensions (H×W×D): 1.25 × 2.85 × 3.27 in. (3.18 × 7.23 × 8.3 cm)
HDMI Version: V1.3
HDCP Support: V1.4
HDMI Video Input resolution: 640×480@60Hz, 800×600@60Hz, 1024×768@60Hz,
1280×720@60Hz, 1280×1024@60Hz, 1360×768@60Hz, 1600×1200@60Hz, 1920×1080@60Hz,
480i/p@60Hz, 576i/p@50Hz, 720p@50/60Hz, 1080i/p@50/60Hz
Output Format: Video: NTSC (480i)
Audio : Stereo
Power Supply: 5V 1A (USB Type-A Female out)
Power Consumption: 3.8 Watts (max.)
Accessories: USB-A male to 0.08 × 0.22 in. (2.1 × 5.5 mm) DC plug 5.9 ft
(1.8 m) length power cable.
TROUBLESHOOTING
If you have problems with your converter, try these suggestions before calling Customer Service.
| PROBLEM | POSSIBLE SOLUTIONS |
|---|---|
| The power indicator is off | If the power on indicator is not on, |
make sure that the wall outlet that the power adapter is plugged into is a
live outlet and that it is turned on (if it is switched).
No video and no audio| Make sure that the TV is set to the correct
input, and the source device is setup to output an HDMI signal.
Has video, but no audio| Set the HDMI output resolution to a lower
value, such as 720p.
Try other audio modes and settings. Change from Bitstream to PCM, or select a 2-Channel or Stereo Audio option (instead of Surround Sound).
Image quality is poor| Because of the limitations of legacy analog composite video output, the image quality will not be as good as a digital or HD source. There will be a softness to the image and the colors will not be as vivid. Small text and details will be hard to read. This is normal and not a problem with the converter box.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, maybe cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ICES statement: CAN ICES-3 B/NMB-3 B
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN
55423 U.S.A. ©2020 Best Buy. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>