SIIG H26Y11-S1 HDMI 2.0 KVM Over Cat6 Extender with Loopout User Manual

SIIG H26Y11-S1 HDMI 2.0 KVM Over Cat6 Extender with Loopout

Features

• Support HDMI 2.0, 4K@60 4:4:4 8bits,
• Support HDCP 2.2 & 1.4
• Support HDR which is 4K2K@60 4:2:0 1 Obits
• Extend 4K@60Hz video up to 230ft/70m through a Cat6/6a/7 network cable
• Support EDID learning
• Support HDMI loop-out on Transmitter
• Support audio extraction via Toslink of Receiver
• HDMI Audio Format PCM2/5.1/7.1, Dolby & DTS 5.1
• Toslink Audio Format PCM2, Dolby 5.1 & DTS 5.1 Support USB 2.0 extend for keyboard & mouse only
• Lightning Protection, Surge Protection, ESD Protection

Package Contents

• Transmitter & Receiver Power adapter DC 5V/2A x2
• USB cable
• Mounting kits
• User Manual

Layout

Transmitter (TX)

1. KVM Light:
   Left LED light on when USB connected to PC. Right LED flash when USB transmission.

2. Reset BUTTON: Press to restart the device

3. RJ-45: Connect to Receiver with Cat6 cable

4. Power/Signal LED: Flash when no HDMI signal. Solid blue when HDMI signal connected.

5. POWER JACK: DC SV/2A

6. HDMI OUTPUT: Connect to HDMI display

7. HDMI INTPUT: Connect to HDMI source

8. USB port: Connect to the USB port of PC for receiver’s Keyboard & Mouse use.

Receiver (RX)

1. KVM Light: The LED only light on when the keyboard or mouse connected.
2. Reset BUTTON: Press to restart the device
3. RJ-45: Connect to Transmitter with Cat6 cable
4. Power/Signal LED: Flash when no HDMI signal. Solid blue when HDMI signal connected.
5. POWER JACK: DC 5V/2A
6. Toslink Output: For audio extract
7. HDMI OUTPUT: Connect to HDMI display
8. USB port: For keyboard & mouse only Support wireless keyboard & mouse

EDID Learning

• The extender will auto-learning RX connected display EDID.
• If the TX loop-out connected display also, the device will use the smaller display EDID of two displays.

For Example

1. Two displays are 4K@60 & 1080p@60, the extender will use 1080p@60 EDID. Two displays output resolution will be 1080p@60.
2. Two displays are 4K@60, the extender will use 4K@60 EDID. Two displays output resolution will be 4K@60.

• Please press the reset button to re-learning EDID after a display change.

Application

Support

For more info or tech support http://www.siig.com/support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>