MASTERVOLT 110505 AC Master Inverter Control Panel User Manual
- June 6, 2024
- MASTERVOLT
Table of Contents
AC Master Inverter Control Panel
USER AND INSTALLATION MANUAL
10000012750/01
AC Master Inverter Control Panel User and Installation Manual
1. Features
- Remote ON/OFF inverter operation with status LED indicator
- Optional Ignition Lockout Function or Remote Override Function
2. Specifications
Operating Temperature 0 40 °C, 32 104 °F
Storage Temperature -30 70 °C, -22 158 °F
Stand-By Current Draw < 40 mA
Input voltage AUX port (optional) 10.5 ~ 31.0 Vdc
Applicable Models AC Master 700 / 1000 / 1500 / 2000 / 2500 / 3500
3. Product description
1| Status LED|
Red, on
Inverter is ON
Red, slow blinking
Ignition Lockout Function is activated
Red, fast blinking
Remote Override Function is activated
---|---|---
2| ON/OFF button|
Switches the connected AC Master unit on/off
3| Remote port|
Connects to the inverter with the RJ-11 cable
4| AUX.|
Optional connection to an auxiliary input wire, e.g. from the boat/vehicle’s
ignition switch. This is only required when Remote Override or Ignition
Lockout is used.
5| Jumper|
The internal jumper is used to select one of the following optional features:
• Remote override (the jumper covers one pin; this is the default position):
the AC Master switches ON when the control panel receives power on the
auxiliary input. Typical use: switching on together with the electrical
system.
• Ignition lockout (the jumper covers both pins): the AC Master switches OFF
when the control panel receives power on the auxiliary input. Typical use:
switching off during engine start.
AC Master Inverter Control Panel – User and Installation Manual
4. Installation
-
Check the contents of the delivery: Inverter Control Panel, 7,5 m (82 ft) RJ-11 cable, this manual.
-
Use the following screw hole and cutout dimensions for mounting of the panel.
-
Optional: a) In case of Ignition Lock: remove the circular back cover, by removing the two screws, and position the jumper over both pins. Replace the back cover. b) In case of Remote Override or Ignition Lock: run a wire from the boat/vehicle’s ignition switch to the AUX. input. Note: this wire must be protected by a fuse. See chapter 3.
-
Route the RJ-11 cable, provided with the panel, from the RJ11 port on the back of the AC Master Inverter Control Panel through the cutout.
-
Position the remote into the cutout and secure it with two screws.
-
First switch the AC Master unit OFF, then connect the RJ11 cable to AC Master unit. After that put its main switch in the “REMOTE” position, see user and installation manual of your AC Master unit.
-
Press the ON/OFF switch on the remote control panel to switch the AC Master unit ON.
-
Verify the status LED is on, both on the remote control panel and the AC Master unit.
5. Correct disposal of this product
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused. Please be informed about the
local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old
products with your normal household waste. The correct disposal of your old
product will help prevent potential negative consequences to the environment
and human health
Copyright © 2020 Mastervolt. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents
in this document in any form without the prior written permission of
Mastervolt is prohibited.
Europe, Middle East & Africa
Customer Service T: +31 (0) 20 34 22 100 E: info@mastervolt.com
Americas & Caribbean
Customer Service T: +1 800 307 6702, Option 1 E: orderentry@marinco.com
Asia Pacific
Customer Service T: +64 9 415 7261 Option 1 E: enquiries@bepmarine.com
Technical Support T: +31 (0) 20 34 22 100 E: ts@mastervolt.com
Technical Support T: +1 800 307 6702, Option 2 E: tsusa@mastervolt.com
Technical Support T: +64 9 415 7261 Option 3 E: technical@bepmarine.com
Location & Shipping Mastervolt Snijdersbergweg 93 1105 AN Amsterdam The
Netherlands
Location & Shipping Power Products, LLC N85 W12545 Westbrook Crossing
Menomonee Falls, Wisconsin 53051 United States
Location & Shipping BEP Marine 42 Apollo Drive Rosedale, Auckland 0632 New
Zealand
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>