SONOFF S31/S31 Lite V1.2 User Manual
- June 6, 2024
- SonOFF
Table of Contents
User Manual
V1.2
S31: Wi-Fi Smart Plug with Power Monitoring US Type
S31 Lite: Wi-Fi Smart Plug US Type
Operating Instruction
**1** Download the eWeLink APP
|
---|---
2 Power on
After powering on, the device will enter the quick pairing mode (Touch) during
the first use. The Wi-Fi LED indicator changes in a cycle of two short and one
long flash.
The device will exit the quick pairing mode (Touch) , if not paired within
3mins. If you want to enter this mode, please long press the pairing button
for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and
one long flash and release.
3Add the device
Tap “+” and select “Quick Pairing”, then operate following the prompt on the APP.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode “to pair.
- Long press the pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of two short flashes and one long flash and release. Long press the pairing button for 5s again until the Wi-Fi LED indicator flashes quickly, then the device enters Compatible Pairing Mode.
- Tap “+” and select “Compatible Pairing Mode ” on APP. Select Wi-Fi SSID with ITEAD-** and enter the password 12345678, and then go back to eWeLink APP and tap “Next”. Be patient until pairing completes.
Specifications
Model
| S31/S31 Lite
---|---
Input
| 120V AC 60Hz
Output
| 1 20V AC 60Hz
Max. current
| 1 5A
Operating temp.
| 0-30°C
Operating systems
| (Android 4.1 & iOS 9.0) or higher
Wi-Fi
| IEEE 802.11 b/g/n 2.4GHz
Material
| PC VO
Dimension
| 76x40x33mm
Product Introduction
Features
Turn on/off the devices from anywhere, schedule power on/off, and share
devices with your family to control.
Power monitoring is not available for S31 Lite.
Switch Network
If you need to change the network, long-press the pairing button for 5s until
the Wi-Fi LED indicator changes in a cycle of two short and one long flash and
release, then the device enters quick pairing mode and you can pair
again.
Factory Reset
Deleting the device on the eWeLink app indicates you restore it to the factory setting.
Common Problems
Q: Why does my device stay “Offline”?
A: The newly added device needs 1 – 2mins to connect to Wi-Fi and network. If
it stays offline for a long time, please judge these problems by the blue Wi-
Fi indicator status:
-
The blue Wi-Fi indicator quickly flashes once per second, which means that the switch failed to connect your Wi-Fi:
1. Maybe you have entered the wrong Wi-Fi password.
2. Maybe there’s too much distance between the switch your router or the environment causes interference, consider getting close to the router. If failed, please add it again.
3. The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless network.
4. Maybe the MAC address filtering is open. Please turn it off.
If none of the above methods solved the problem, you can open the mobile data network on your phone to create a Wi-Fi hotspot, then add the device again.
-
Blue indicator quickly flashes twice per second, which means your device has connected to Wi-Fi but failed to connect to the server.
Ensure a steady enough network. If double flash occurs frequently, which means you access an unsteady network, not the product problem. If the network is normal, try to turn off the power to restart the switch.
Scan the QR code to read the voice control instruction for Amazon Echo and Google Home.
https://www.sonoff.tech/usermanuals
Scan the QR code or visit the website to learn about the latest user manual and help.
Shipping and Storage Temperature
| -40°C to 60°C
---|---
Use Method
| Plug and Play
Software Class
| A
Overvoltage Category
| II
Pollution Degree
| 2
Protection against Electric Shock
| Insulation-encased Class I
Environmental
| IP20 (NEMA 1)
Automatic Action
| Micro-disconnection (Type 1.B)
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type S31/S31 Lite is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/usermanuals
TX Frequency: WiFi:2412-2472MHz
RX Frequency: WiFi: 2412-2472MHz
Output Power: 21.34dBm(802.11b), 21.26dBm(802.11g), 23.16dBm(802.11n20)
Shenzhen Sonoff Technologies Co., Ltd.
1001, BLDG8, Lianhua Industrial Park, Shenzhen, GD, China
ZIP code: 518000
Website: sonoff.tech
MADE IN CHINA
LIKE IT!
Glad to know you are satisfied with SONOFF products. It would mean a lot to us
if you can take a minute to share your buying experience.
Share it on Amazon
Share it on your
social media
Share it with your friends and family
Get the latest news by following us:
New arrival
Promotion
How-to videos
HAVE A PROBLEM?
We are so sorry for the inconvenience caused by the product.
Please contact us for help via the email address below.
support@itead.cc
We will get back to you as soon as possible.
https://www.youtube.com/channel/UC1EsS_wR0_isqSbbN-ZM8GA
YouTube| 
https://www.facebook.com/SONOFF.official/
Facebook
---|---
Documents / Resources
|
SONOFF S31/S31 Lite
V1.2
[pdf] User Manual
SONOFF, S31, S31 Lite, V1.2, WiFi Smart Plug, WiFi, Smart, Plug
---|---