BYBLIGHT TH-SF0201 1-Light White Capiz Style Shell Chandelier Instruction Manual
- June 12, 2024
- BYBLIGHT
Table of Contents
Assembly Instructions
CHANDELIER SKU#TH-SF0201
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL
INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS:
- TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
- WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH. NEVER SPRAY CLEANER DIRECTLY ONTO THE FIXTURE.
NOTE: Product may not look exactly as shown in figures.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have resulted during shipping. If there is a defect in the
wire, do not attempt installation.
This fixture has been rated for up to 60-watt maximum TYPE A bulbs or 13-watt
compact fluorescent light bulbs or 9-watt LED bulbs . To avoid the risk of
fire, do not exceed the recommended wattage.
This product is safety listed for dry locations.
This product may be dimmed with a standard incandescent dimmer.
Assembly Steps:
Part Included
Code| Part Description| QTY
A| Junction Box| 0
c| Single Mounting Bracket| 1
E| Canopy Screws| 2
F| Canopy| 1
G| rods| 4
H| Fixture| 1
J| Cup| 1
K| Bulb| 1
L| Leading Wires| 0
M| Fixture Wires| 1
Hardware included
B| Wire Nuts| 4
D| Mounting Screws| 3
Trouble Shooting
| Problem | Possible Cause | Solution |
|---|---|---|
| The bulb will not light. | The power is OFF. | Ensure the power supply is ON. |
| There is a faulty wire connection. | Check the wiring. | |
| The circuit breaker is OFF. | Ensure the circuit breaker is in the ON position. | |
| The fuse blows or circuit breaker trips when the light is turned ON. | There | |
| are crossed wires or the power wire is grounding out. | Check the wire |
connections. Contact a qualified electrician.