Wisdene BL006 Ultra Thin Anti-Lost SmartCard Instruction Manual

Wisdene BL006 Ultra Thin Anti-Lost SmartCard

Specifications

• Brand: Wisdene

• Model: BL006

• Type: Ultra Thin Anti-Lost SmartCard

• Compatibility: Apple devices (iPhone, iPad, iPod Touch,
  Mac)

• Features: Rechargeable battery, Find My App integrationS

tep 1: Add your Smart Finder to the Find My App

1. Open the Find My App on your supported Apple device (iPhone, iPad, iPod Touch, Mac).
2. Allow notifications from the App.

Step 2: Set Up Smart Finder

1. Select Other Supported Items in the app.
2. Ensure your Smart Finder is close to your phone for pairing.
3. Follow the on-screen instructions to connect and set up your Smart Finder.
4. Tap Finish to complete the setup process.

Step 3: Enable Lost Mode

If your Smart Finder is out of range or lost:

1. Enable Lost Mode in the app.
2. Enter contact information for notification purposes.
3. Your Smart Finder will be locked and cannot be paired with a new device.

Step 4: Additional Functions

• Rename Item: Change the name of your Smart Finder.
• Lost Notification: Receive alerts when your Smart Finder is out of range.

FAQ

Q: What should I do if pairing with the Find My app fails?

A: If pairing fails, try the following actions:

• Change the phone’s network (Wi-Fi/mobile).
• Reset your Smart Finder.
• Do not remove the item when Lost Mode is enabled to avoid locking it.

INSTRUCTION MANUAL

PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE

Getting Started

• Remove the product from the packaging
• Please retain all packaging after you have checked and counted all the parts and the contents against the parts list.

Package Contents

• WiCard
• Instruction Manual

Key Features

• Smart Finder
• Uses Apple Find My App to locate your device
• Locate from iPhone, ,Pad, ,Pod Touch or Mac computer
• Simply attach the device to your keys, wallet, pu飞e and you can start locating it remotely from your App
• Rechargeable battery
• Siri compatible

Safety Instructions

• Keep the unit away from heat sources, direct sunlight, water and any other liquids
• Do not operate the unit if it has been exposed to water, moisture or any other liquids to p『event damage to the unit.
• Do not use the un仆11 it has been dropped or damaged in any way
• Repai飞to eleclncal equipment should only be performed by a qualified electrician. Improper repai『s may place the user at serious risk
• Do not use this unit for anything other than ,ts intended use
• Keep the unit out of reach of children
• This appliance is not a toy.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire or the like

Specifications

• Size: 54×85.6×1.7mm
• Suitable for. Keys, Wallet, Purse or other belongings
• Battery: Lithium Polymer battery
• Standby time. About 6 months (Rechargeable)
• Net weight : 11 7g
• App Name: Find My
• Waterproof level: IPXB

Description of Parts

Battery Rechargeable
When battery is drained, charge it with any wireless charger that meets the QI standard.

• Smart Finder includes a built-in rechargeable 100MAH L1th1um Polymer battery
• The LED light in red when charging, change to green light when fully charged

Instructions for Use

Switch on/off the unit
Switch on: Short press the function button once and you’d hear a ring chime, indicating it is powered o and will be in pairing status
Switch off: Long press the function button for three seconds, it should beep twice, indicating 1t is powered off.

Add your Smart Finder to the Find My App

1. Open the “Find My” App on your support

2. Allow notifications from the App  Phone,, Pad, , Pod Touch Mac comp
   

3. Select “Items” at the bottom, then tap “Add Other Item” or tap on• 十”, con di「ectly

4. Select “Other Supported Items”

5.  Make sure your Smart Finder is close to your phone. It will pop-up “Searching Items”

6. You will see a pop-up ” WiCard”, then tap “Connect” 

7. Follow the pop-up to fill name, select an emoji, and then tap “Continue”.
   

8. When “This Item Is Linked to Your Apple ID” pops up, tap “Agree”

9. Tap “Finish” to finish your Smart Finder setup

Function Introduction

• Find Items – Tap “Play Sound” to make your Smart Finder beep when it is nearby
• Find your Hem’s location – Your Smart Finder’s last known location will appear on the map as emoji you choose during set-up, tap “Directions” to navigate to the last known location

Notifications

• Enable the “Notify When Found toggle, when your Smart Finder’s location is seen by another “Find My’ enabled device, you will receive a notification of its updated location,
• Enable the “Notify When Left Behind” toggle, you will receive a notification when you leave your Smart finder behind and it is no longer in range of your device,
  Note: “Notify When Found” can only be activated when your Smart Finder is out of range.

Lost Mode

• When your Smart Finder is lost under “Lost Mode”, tap the “Enable” tab, a screen calling Lost Mode will pop up, tab “Continue”. You can enter your phone number or email address and tap “Next”.
• You may enter a message that will be shared with the person that finds your Smart Finder.
• Tap “Activate” to enable “Lost Mode”.

Note:

• When “Lost Mode” is enabled, “Notification When Found” is automatically enabled.
• When “Lost Mode” is enabled, your Smart Finder is locked and cannot be paired to a new device.

Rename Item

• Name of the Smart Finder can be 『enamed

Remove Item

• Make sure “Lost Mode” is disabled and click “Remove Item”. After selecting the option, the system will pop up “Remove Item?” and click “Remove” to remove the device.
• The Smart Finder is now reset and ready to pair to a new device.

Share This Item

• Tap”Add Person”to share this Item
• Tap”Continue” and select related people to share.
• Tap “Share” and wait for related people to confirm your invitation Others also can locate this item. And tracking notifications will be muted. *Available for iOS 17 above version.

System Requirements and Compatibility

• Apple ID
• iPhone models with iOS 14.5 or later.
• Pad models with , PadOS 14.5 or later.

About the Find My App

The Apple Find My network provides an easy, secure way to locate this item using the Find My app on your iPhone, ,Pad, or Mac, or the Find Items app on Apple Watch
To use the Apple Find My app to locate this , tern, the latest version of 10S, 1PadOS, or macOS 1s is recommended The Find Items app on Apple Watch requires the latest version of watchOS

Learn More

• This item can be located by its owner using the Find my app. For more information, follow the 1nstruct1ons below
• Locate the button the side of the device.
• Press the button twice. You will hear a confirmation sound
• Tap “Continue On Website” for more information 1nclud1ng any Lost Mode message from the owner

How to Disable

• Locate the button on the side of the device
  Long press the function button for three seconds until two beeps are heard. This will stop sharing the location of this Smart Finder.

Factory Reset

• Press the button 4 times rapidly and then hold 1t a fifth time until you hear a ringing chime.
• A reset operation is required to enable the device to enter the pairing state again (synchronization of Find My also requires simultaneous unbinding) and rebind the new Apple ID account.

How can I prevent my device from being used for malicious tracking
When someone else’s device mixes with your belongings, and tracks it over a period of time, you will be reminded in below two ways:

• If you have an iPhone, iPad, or iPod touch etc Apple device, you will get alerts on your Apple device. This feature is available on iOS or iPadOS 14.5 version or above.
• If someone else’s device finds its way into your stuff, your iPhone will notice it is traveling with you and send you an alert. After a while, if you still have not find it, the Smart Finder will start playing a sound to let you know where it is.

Important tips:
When pairing a device with Find My app, the phone will link to the Apple server. Pairing may fail because of network problems. The following action is recommended

• Change the phone’s network, such as switching between Wi-Fiand mobile. The first pairing may take a long time, please wait patiently.
• Reset your Smart Finder.
•  When “Lost Mode” is enabled, DO NOT REMOVE ITEM in the APP.

Your this item will be locked and cannot be paired to a new device. Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.

Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are the trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Care and maintenance

Read the following recommendations before using the unit. Following these you will be able to enjoy the product for many years.

• Don’t expose the unit to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
• Don’tuse abrasive cleaning solvents to clean the unit.
• Don’t expose the unit to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
• Don’t dispose of the unit in fire as it will result in an explosion.
• Don’t expose the unit to contact with sharp objects as this will cause scratches and damage.
• Don’t let the unit fall down onto the floor. The internal circuit might get damaged.
• Don’t attempt to disassemble the unit as it may get damaged if you are not professional.

FCC Instructions Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.

NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment NOTE: This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.
FCC I D: 2A6W7-BL006

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>