Style SELECTIONS 64238881 Drapery Rod Curtain Rod Instruction Manual
- June 13, 2024
- Style SELECTIONS
Table of Contents
ITEM#5276610/ 5276611/ 5276608/ 5276609/
5276606/ 5276607/ 5276618/5276619/
5276616/ 5276617/ 5276614/ 5276615/
5287409/ 5287408/ 5287407/ 5287406
DRAPERY RODMODEL#FSI 1457E BGLD/ FSI 1457F BGLD/ FSI 1457E
BNIC/
FSI 1457F BNIC/FSI 1457E MBLK/FSI 1457F MBLK/ FSI 1475E BRNZ/
FSI 1475F BRNZ/FSI 1475E BNIC/ FSI 1475F BNIC/ FSI 1475E MBLK/
FSI 1475F MBLK/FSI 1172E BNIC/ FSI 1172E MBLK/ FSI 1172F BNIC/ FSI 1172F MBLK
64238881 Drapery Rod Curtain Rod
Thank you for purchasing this Style Selections product. We’ve created these
easy-to-follow instructions to ensure you spend your time enjoying the product
in-stead of putting it together. But, if you need more information than what
is provided here, please visit Lowes.com , search the
item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
877-888-8225, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
*Image is for example only. Appearance of actual product may vary.
TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
---|---|---|
Drapery rod not level. | Drapery hooks not installed correctly. | Make sure to |
use level (not included) during installation.
Drapery rod hook is loose.| Drapery hooks not anchored correctly.| Attach
drapery hooks to wall studs if possible. Use anchors
and screws supplied if you can’t attach to stud.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
- Visit lowes.com for more information
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors. NOTE
Anchors are not needed for all installation types. -
Attach the adjustable bracket to the wall using the screws provided. Next adjust the bracket distance out from the wall as desired and tighten with screws provided. NOTE
Repeat steps 1 to 3 for additional brackets.
Use level (not included) if necessary. -
Fit drape(s) (not included) on rod.
-
A. Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure. 28-48-in Drapery Rods
B. Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure. 48-84-in Drapery Rods
STYLE SELECTIONS and logo design are trademarks or registered trademarks of
LF, LLC.
All rights reserved.
Printed in China
SS23345
Documents / Resources
|
Style SELECTIONS 64238881 Drapery Rod Curtain
Rod
[pdf] Instruction Manual
64238881 Drapery Rod Curtain Rod, 64238881, Drapery Rod Curtain Rod, Rod
Curtain Rod, Curtain Rod, Rod
---|---