Hytera VM780 4G Body Worn Camera User Guide

: June 6, 2024
: Hytera

Hytera VM780 4G Body Worn Camera User Guide

Key Operations

Press: Press the key and release it rapidly.
Long press: Press the key and release it after a predefined period of time.
Press and hold: Press and hold the key without releasing.

Product Overview Product Layout

LED Indicator

Status

|

Description

---|---

Glows red

Glows green

|

● The product is transmitting voice or emergency alarm.

● The product is being charged.

● The TF card is full (lasts for three seconds).

● The product is being turned off (lasts for two seconds).

● The product is receiving voice or emergency alarm.

Glows orange

| ● The product is fully charged.

● The product is being turned on.

Call hang time. You can press and hold the PTT key to speak.

Flashes orange rapidly| ● No voice transmission in emergency mode.

Flashes red slowly

| ● The remaining capacity of the TF card is less than 2 GB (lasts for three seconds).

● Flashes once every second: The product is recording a video.

Flashes orange slowly

| ● Folrarsehpelsacoentcheeebvaetrtyerfiyvien steimcoen. ds: The battery runs low. Please recharge The product is recordFg an audio.
Flashes orange slowly| The product is recording an audio.

Before Use

Installing the Nano SIM Card

Open the card slot cover and unlock the SIM card flip cover according to the instructions on it. Place the Nano SIM card into the slot and lock the flip cover and slot cover, as shown in the following figure.

Attaching the Battery

1 Warning

Use only the Hytera standard or optional battery. Polarity reverse or use of other batteries may result in explosion and fire hazards.
Attach the battery according to the steps shown in the following figure. To remove the battery, turn off the product and reverse the attaching steps.

Attaching the Belt Clip

Attach the belt clip according to the steps shown in the following figure. To remove the belt clip, reverse the attaching steps.

Charging the Product

The LED indicator on the product tells its charging status, see LED Indicators for details.
To charge the product, do as follows:

Basic Operations

Turning On/Off the Product
Turning On the Product
In power-off mode, long press the On/Off key for three seconds.
Turning Off the Product
In power-on mode, long press the On/Off key for three seconds.
Logging in to the SmartEye/P-PoC6000 Server
You need to log in to the SmartEye/P-PoC6000 server to use features such as video polling and PoC talking.

● MPTT+P-PoC6000+SmartOne Solution

Tap MPTT to enter the login interface.
Tap Server Configure to setup the sever information.
Tap Save and return to the login interface.
Enter your account and password, and tap Login.
Obtain your account and password from the administrator of the network management system. Select rem account and rem password so that you can log in directly next time.

● MPU+SmartEye Solution

In the MPU preview screen, tap the icon on the upper right corner and select Login.
Enter the address and port number of the SmartEye server, and tap OK. Upon successful login, the Login button is changed to Logout.

Recording Videos

Normal recording: in preview mode, toggle the Video Recording key to start video recording; the LCD screen displays the recording time. During video recording, toggle the Video Recording key again to finish recording.
Key recording: during video recording, press the Audio Recording key to mark the video as key recording or unmark a key recording.

Recording Audios

Normal recording: in preview mode, long press the Audio Recording key to start audio recording; the LCD screen displays the recording time. During audio recording, long press the Audio Recording key
again to finish recording.
Key recording: during audio recording, press the Audio Recording key to mark the audio as key recording or unmark a key recording.

Taking Photos

Press the Photo Taking key to take a photo.

PoC Talking

MPTT+P-PoC6000+SmartOne Solution
»» To answer a full-duplex individual voice/video call: press the PTT key.
»» To hang up a full-duplex individual voice/video call: long press the Photo Taking key.
»» To transmit or receive a half-duplex voice/video call: press and hold the PTT key and talk to Microphone 1; release the PTT key to receive a call.
MPU+SmartEye Solution To transmit or receive a half-duplex voice call: press and hold the PTT key and talk to Microphone 1; release the PTT key to receive a call.

Emergency Mode

Enabling Emergency Mode In emergency situations, press the Emergency key to enable emergency alarm. The product will start key video recording, and enable video polling to the SmartOne dispatch or the SmartEye monitor and seek help from the command and dispatch center.
Disabling Emergency Mode.