SONOFF ZBMINI Zigbee Two Way Smart Switch Installation Guide
- June 6, 2024
- SonOFF
Table of Contents
ZBMINI
Quick installation Guide V1 .2 
ZigBee Smart Switch
The device can be operated intelligently via working with the SONOFF ZigBee
Bridge to communicate with other devices.
The device can work with other gateways supporting ZigBee 3.0 wireless
protocol. Detailed information is in accordance with the final product.
Power off
To avoid electric shocks, please consult the dealer or a qualified professional for help when installing and repairing! Please do not touch the switch uring use.
Wiring Instruction
Make sure the neutral wire and live wire connection is correct.
51/52 can connect with the rocker light switch (the self-return rocker light
switch is not supported) or doesn’t connect. To ensure safety, do not onnect
the neutral wire and live wire to it.
ZSSsetup instruction
-
Download the latest Alexa App
-
Add Amazon Echo
-
Add device
After the device is powered on, wait 1-2mins to fresh the device list in Alexa App, and the added device will appear in the device list.
Please try to pair the device using eWeLink App if SS setup is failed.
LIKE IT!
Glad to know you are satisfied with SONOFF products.
It would mean a lotto us if you can take a minute to share your buying
experience.
Share it on Amazon
Share it with your friends and family
Get the latest news by following us:
New arrival Promotion How-to videos
HAVE A PROBLEM?
We are so sorry for the inconvenience caused by the product. Please contact us
for help via the email address below.
support@itead.cc
We will get back to you as soon as possible.
https://www.youtube.com/channel/UC1EsS_wR0_isqSbbN-ZM8GA
|
https://www.facebook.com/SONOFF.official/
---|---
eWeLink App pairing
-
Download APP
http://app.coolkit.cc/dl.html -
Add SONOFF ZigBee Bridge
-
Power on
After powering on, the device will enter the pairing mode
during the first use and the LED signal indicator flashes.
The device will exit the pairing mode if no next operation for a long time. If enter again, please long press the manual switch for 5s until the LED signal indicator flashes and release. -
Add sub-devices
Access eWeLink APP, select the Bridge that you want to
connect, and tap Add” to add a sub-device, and be patient until pairing
completes.
If the addition failed, move the sub-device closer to the Bridge and try again.
User Manual
https://www.sonoff.tech/usermanuals
Scan the QR code or visit the website to learn about the detailed user manual and help.
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the user’s authority to operate the equipment. This
device complies with part 15of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter,
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference ma residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a
particular installation. If this equipment does cause harmfulinterference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. -
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Hereby, Shenzhen Sonoff Technologies Co., Ltd.
declares that the radio equipment type ZBMINIis in compliance with Directive
2014/53/EU.The full text of the EU declaration of conformity is available at
the following internet address:
https://sonoff.tech/usermanuals
RX Frequency:
2405-2480MHz
TX Frequency:
2405-2480MHz
Output Power:
1.80dBm
Shenzhen SonoffTechnologies Co., Ltd.
1001, BLDG8, Lianhua Industrial Park, shenzhen,
GD, China
ZIP code: 518000
Website: sonoff.tech
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>