SONOFF BASICR2 Wi-Fi Smart Switch Installation Guide
- June 6, 2024
- SonOFF
Table of Contents
DIY BAsic
Quick Installation Guide V 1.2
Power off
To avoid electric shocks, please consult the dealer or a qualified professional for help when installing and repairing! Please do not touch the switch during use.
Wiring instruction
Ceiling lamp wiring instruction
One live wire wiring instruction
Make sure the neutral wire and live wire connection is correct
Download APP
Power on
After powering on, the device will enter the quick pairing mode (Touch) during
the first use. The Wi-Fi LED indicator changes in a cycle of two short and one
long flash and release.
The device will exit the quick pairing mode (Touch) if not paired within
3mins. If you want to enter this mode, please long press the manual button for
about 5s until the Wi-Fi LED indicator changes in a cycle of two short and
one long flash and release.
LIKE IT!
Glad to know you are satisfied with SONOFF products.
It would mean a lot to us if you can take a minute to share your buying
experience.
Share it on Amazon
Share it with your friends and family
Get the latest news by following us:
New arrival Promotion How-to videos
HAVE A PROBLEM?
We are so sorry for the inconvenience caused by the product. Please contact us
for help via the email address below.
support@itead.cc
We will get back to you as soon as possible.
https://www.youtube.com/channel/UC1EsS_wR0_isqSbbN-ZM8GA|
https://www.facebook.com/SONOFF.official/
---|---
Add the device
Tap “+” and select “Quick Piring” then operate following the prompt on the
APP.
Tippen Sie auf +”, w~hlen Sie ~Quick Pairing” und arbeiten Sie dann gem~~ der
Aufforderung auf der APP
User Manual
Scan the QR code or visit the website to learn about the detailed user manual and help
https://www.sonoff.tech/usermanuals
Scan the QR code to read the voice control instruction for Amazon Echo and Google Home.
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. This transmitter
must not be co located or operating in conjunction with any other antenna or
transmitter
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Hereby, Shenzhen SonoffTechnologies Co.,
Ltd. declares that the radio equipment type BASICR2/RFR2 is in compliance with
Directive 2014153/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.sonoff.tech/usermanuals
TX Frequency:
- WiFi: 2412-2472MHz
RX Frequency:
- WiFi: 2412-2472MHz
- SRD: 433.92MHz (RFR2)
Output Power:
- 14.43dBm(802.11 b),
- 11.94dBm(802.11g),
- 11.96dBm(802.11 n20)
Shenzhen SonoffTechnologies Co., Ltd.
1001, BLDG8, Lianhua Industrial Park, shenzhen,
GD, China
ZIP code: 518000
Website: sonoff.tech
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>