SONOFF DIY MINI Wi-Fi Smart Switch MINIR2 User Guide
- June 6, 2024
- SonOFF
Table of Contents
SONOFF DIY MINI Wi-Fi Smart Switch MINIR2 User Guide
1. Power off
To avoid electric shocks, please consult the dealer or a qualified
professional for help when installing and repairing!
Please do not touch the switch during use.
2. Wiring Instruction
S1/S2 can connect with the rocker light switch or doesn’t connect. To ensure safety, do not connect the neutral wire and live wire lo it.
Make sure the neutral wire and live wire connection is correct.
3. Download APP
4. Power on
After powering on, the device will enter the quick pairing mode {Touch) during the first use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please long press the manual button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
5. Add the device
Tap”+” and select “Quick Pairing”, then operate following the prompt on the APP.
User Manual
https://www.sonoff.tech/usermanuals
Scan the QR code or visit the website to learn about the detailed user manual and help.
Scan the QR code lo read the voice control instruction for Amazon Echo and Google Home.
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the user’s authority lo operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body. This transmitter must
not be collocated or operating in conjunction with any other antenna or
transmitter.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference lo radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the fowling measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Hereby, Shenzhen Son off Technologies Co., Ltd. declares that the radio equipment type MINIR2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://fwww.sonoff.techlusermanuals
TX Frequency:
WiFi: 2412-2472MHz
RX Frequency:
WiFi: 2412-2472MHz
Output Power:
9.86dBm{802.11b),
9.93dBm{802.11g),
9.92dBm{802.11n20)
https://www.youtube.com/channel/UC1EsS_wR0_isqSbbN-ZM8GA
https://www.facebook.com/SONOFF.official/
