HAVIT LIFE 02T True Wireless Stereo Earbuds User Manual
- September 26, 2024
- havit
Table of Contents
HAVIT LIFE 02T True Wireless Stereo Earbuds
Package Content
Product Overview
Wearing
Earbuds are fitted with middle-size eartips and you can try sizes XS, S, and L if cannot fit well. Please follow the images to wear the earbuds properly.
Power on/off
Manual operation
- Power on: Touch and hold any earbud for 3S.
- Power off: Touch and hold any earbud for 3S.
Pairing
Please remove the protective film of the earbuds and charge the case fully for first-time usage.
- Turn on the Bluetooth of your device.
- Take out the earbuds from the case and the earbuds are in pairing mode while one earbud indicator flashes white & orange.
- Select “HAVIT LIFE 02T” on the list.
- “HAVIT LIFE 02T” now is connected to your device and the earbud indicator is off.
Note
The earbuds are automatically connected to the last pairing device when they
are taken out of the case.
Touch Control
Earbuds Charging
Put the earbuds in the case. The earbuds are charging.
Case Charging
Charge the case with a type C charging cable, preferably from any PC or laptop as compared to a USB charger.
- Orange indicator is breathing Charging
- The case indicator is off Fully charged
Reset
- Take out both earbuds then touch and hold any one of them for 3S to power off.
- Touch and hold both earbuds for 85 until the orange indicator is breathing. The reset is done.
- Put both earbuds back into the case and take them out again. Follow the above pairing instructions to connect “HAVIT LIFE O2T” again.
Safety Tips
- Don’t expose the earbuds to liquids, moisture, or humidity as they have electronics and a battery inside.
- Don’t disassemble your earbuds. There are no user-friendly parts inside it.
- Don’t drop the earbuds and keep them away from sharp objects such as keys in your pockets.
- Clean earbud tips, the metal contact surface of earbuds, and the case with alcohol cloth regularly to ensure there is no dust accumulation and keep good quality sound experience.
- Charge your earbuds below the 5V/A charger.
- Don’t expose the earbuds to extremely high or low temperatures as this may damage the battery or even deform the plastic parts.
- Listening to music at a high volume is harmful to your ears.
- Don’t throw the earbuds in a fire to dispose of them otherwise inside battery may explore.
FCC ID: 2AI61-TW986
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used per the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. exposure requirement. The device can be used in portable exposure conditions without restriction.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Batteries:
A warning that batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire, or light.
- Replacement of a battery with an incorrect type can defeat a safeguard.
- Disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>