BaByliss G824E Epilator Hair Remover Instructions
- June 5, 2024
- BaByliss
Table of Contents
G824E Epilator Hair Remover
Instruction Manual
|
---|---
G824E
Please read the following instructions carefully before using the appliance.
PRODUCT FEATURES
- A system with 2 reverse rotation epilation heads – double effectiveness (1) 72 tweezers – optimal effectiveness on short hair (0.5 mm)
- Precision head 16 tweezers: for ultra-precise depilation of the armpits and bikini line (2)
- 1 pedicure head: 2 anti-callous rollers (3)
- 2 speeds – speed I for gentle epilation, speed II for ultra-effective epilation (4)
- Removable heads – easy maintenance – Washable in water (5)
- Mains operated
- Protective cover, cleaning brush, pouch, adapter
USE ON THE MAINS
Plug the appliance into the mains and set it to position I.
IMPORTANT! Only use the adapter that is supplied with the appliance.
CHANGING THE HEAD
- Press the button on the back of the appliance to release the head (Fig. 1).
- Fasten the desired head by pressing the appliance base until it clicks into place.
EPILATION
Epilation of the legs:
- Switch the appliance on and choose speed I or II.
- Keep the appliance perpendicular to the surface to be epilated.
- Always use both hands: with one hand, carefully pull the skin smooth, then use the other to move the appliance. Do not make circular movements or go backward and forwards.
- Move the epilator slowly. Please note: if the appliance is pressed too firmly against the skin, it may be slowed and less effective.
Epilation of sensitive areas:
We recommend using the precision head to depilate sensitive areas.
Its design intelligently reduces the number of tweezers for more precise
depilation.
If hair is long (more than 1 cm), we recommend cutting it with scissors before
using the epilator.
- To epilate armpits, move the epilator from bottom to top, then, thereafter, from top to bottom.
- To epilate the bikini line, carefully pull the skin taut, moving the appliance from the outside inwards.
COMPLETE ANTI-CALLOUS TREATMENT
With its two rollers, the pedicure kit eliminates all callouses and dead skin
effectively, for the long-lasting beauty of perfect feet.
Before use
-
Check that the skin of the feet is perfectly clean and slightly damp.
Do not apply cream or moisturiser. -
Check that the roller is correctly positioned on the pedicure head Use
Advice for use
For perfect results, use the appliance on slightly damp skin. Do not use the appliance right after bathing.
Treatment takes place in 2 steps:
Step 1: Exfoliating roller (large grain) associated with quick speed to effectively eliminate callouses with long-lasting results.
Step 2: Gentle finishing roller (fine grain) and slow speed for ultra-soft, extra supple skin. -
Switch the appliance on.
-
Gentle roll over the soles of the feet to gradually remove callouses and dead skin.
Note:
- If the appliance is pressed too firmly against the skin, it may be slowed and less effective.
- Do not spend more than 3-4 seconds continuously on any one area.
- Stop use if the skin becomes irritated or inflamed.
After use
- Rinse feet to eliminate any residual dead skin. Dry feet thoroughly.
Apply a moisturizing cream to the feet and massage the feet for as long as necessary to allow the cream to penetrate.
Changing the roller
Only use BaByliss original exfoliating rollers to replace it. Change the
exfoliating roller when the appliance appears to be less effective.
Use the side grips to remove the cover (Fig.2). Release the roller by lowering
the right side of the device fixing mechanism (Fig.3).
Remove the roller (Fig.4). Position the new roller from the left (the longest
metal stem) (Fig.5). Fasten into place, lifting the right side of the device
(Fig.6). Check that the two stems are correctly inserted into the relevant
holes. Replace the cover (Fig.7).
IMPORTANT
-
Only use the epilator for epilation, in accordance with the instructions for use.
-
Do not epilate on open wounds, cuts, burns, warts, moles, sunburnt skin, or varicose veins. Do not use in the event of skin irritation or infection, like psoriasis or eczema
on the legs. -
Do not use it to epilate the face, hair on your head, chest, eyebrows, eyelashes, or genitalia. The appliance can only be used on the legs, bikini line, arms, and armpits.
-
Do not use the pedicure kit on open wounds, cuts, warts, or moles.
Do not use in the event of skin irritation or infection (psoriasis or eczema).
MAINTENANCE
-
Clean with a little brush between the discs after each epilation.
-
We recommend regular disinfection of the appliance head and accessories, using alcohol.
-
For proper hygiene, the epilation head can be removed and easily rinsed under running water.
Do not immerse the appliance completely in water. -
If you need to clean the appliance shell, use a cloth soaked with a gentle detergent.
BABYLISS
99, Avenue Aristide Briand
92120 Montrouge – FRANCE
www.babyliss.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>