JY 686AE Bug Zapper with Light Sensor User Guide
- June 17, 2024
- JY
Table of Contents
JY 686AE Bug Zapper with Light Sensor
INTRODUCTION
- Thanks for purchasing Our Bug Zapper. Please check the condition of the device before use. If the device is damaged, do not use it.
- The device is environmentally safe and hygienic, smoke-free and non-toxic. It does not include pesticides. The built-in lamp is harmless to people, pets, or plants.
- The highly efficient fitting tube emits special ultraviolet waves and attracts insects, insects fly into ultraviolet light and get an electric shock when they come in contact with an electrified grid.
- The device is highly efficient and energy-saving. It is designed for continuous use and is ready to provide you with a long mosquito-free pastime for many years.
- For optimal performance, please read this manual carefully before use.
- If you have any questions about the Bug Zapper, please contact us via your order, we will provide 24-hour service for you and solve the problem.
ATTENTION
- Do not use it in flammable and explosive locales, or similar.
- Check the local voltage codes before installing.
- Do not intend to touch internal high voltage grids because of electric shock danger.
- Never put metal objects inside the net during use.
- Hang or place the appliance out of the reach of children.
- Never remove any fixed part of the appliance to make internal adjustments to avoid electric shock.
- If the lamp starters or other parts of the appliance are damaged, the manufacturer, its service agent, or a similarly qualified person must replace it to avoid a hazard.
- Clean the metal grid at frequent intervals. Unplug the appliance before cleaning. Use a suitable brush to clean the high-voltage grids and throw away the insect debris from the collection every week. Do not wash with water.
- Avoid rough shaking that could damage the tube or its components.
WHERE AND HOW TO USE OUTDOOR
The product can be used in the courtyard, garden, camping, night fishing, etc.
The product has an energy-saving design and soft lighting; It should not be
used in high light conditions, otherwise, it will affect the destruction of
mosquitoes.
24 hours intelligent light control
Turn on the switch and the mosquito control lamp will turn off automatically
during the day and turn on automatically at night. Turn off the switch and
turn on the mosquito control lamp for 24 hours.
NOTICE FOR INDOOR USE: Hang or place the device out of the reach of children
Suggested suspension height:
- Hang the insect killer at a height of 6 to 8 feet above the ground, at a distance of 1 foot from the wall.
- Place the unit 10 feet away from the area intended for human activity.
- Position the insect killer between the source of insects(woods, lowlands, etc ) and the area to be protected.
- Plug the cord into a compatible extension cord designed for outdoor use. The bulbs will emit a bluish glow within a few seconds.
- To increase the killing rate, please clean mosquitoes stuck in the grid Before cleaning, please keep the power off, open the base, and use a soft brush to clean It.
IP4 Waterproof
- Unique waterproof design, it can be used inside and outside!
TECHNICAL INFORMATION
- Light source: 18 w UV tube High voltage metal grid: 3800-4200V Waterproof grade: IP4
TROUBLESHOOTING
Caution: unplug the unit before servicing
| Problem | Possible Cause | Correction |
|---|---|---|
| The light is off and there is no high voltage on the grid | 1. There is no |
electricity.
2. The lamp is not installed correctly
3. The starter is faulty.
4. The bulb burnt out.| 1. Check the fuse or circuit breaker. Check the
extension cord.
2. Check all sockets for proper fit and alignment.
3. Starter replacement by the manufacturer is required.
B.The light is on, but there is no high voltage on the grid.| 1. Shorted
grids.
2. The transformer is defective.| 1. Examine the grid and clean it using a
brush.
2. Replacement by manufacturer is required.
C.lntermittent or continuous sparking between grid rods.| 1. The gap between
grid rods is too small.
2. The grid is clogged with dead insects.| 1. Unplug the unit and adjust the
grids by bending them back into alignment.
2. Clean the grid using a brush.
D.The light is on, but no longer attracts insects.| 1. The invisible power of
black light is reduced due to the age of the lamp.| 1. Replace the bulb.
Replacement by the manufacturer is required.