Hwagol B0BQR6RYPJ Smartwatch User Guide

B0BQR6RYPJ Smartwatch
User Guide

Touch and key operation instructions

Touch
Operating
instructions| glide| Control Interface| Right sliding| Functions
---|---|---|---|---
Slide up| Notify| Left sliding| shortcuts
Long press| Dial switching| click| select

Please enter the APP to learn about the detailed features of the product

Watch charging

This product is a magnetic charging device. One end of the charging cable is connected to the charging adapter via USB, and the other end is attached to the contact point on the back of the watch. The watch screen will display charging instructions, indicating the start of charging

Note: Connect the USB port to a charger with an output current of 5V1A, or a computer USB port for charging. The charging time is 2-3 hours and the watch is fully charged when the full charge icon appears on the screen. Warm tip: You may not be able to charge the watch by plugging it into an adapter with a current higher than 5V1A, doing that may cause damage to the watch. If it cannot be charged, please contact the store customer service.

Download and install JYouPro

1. Android users, please search for “JYouPro” on Google Play or mobile app market to download and install it，
2. IOS users should search for “JYouPro” in the Apple Store to download and install.
3. Scan the QR code and use the smartphone scanning tool to open the link. There may be a problem. Please copy the link and open the download through a browser.

http://download.keeprapid.com/apps/smartband/keepfit/index.html

Mobile phone system requirements:
Android 5.1 and above
IOS8.2Up

Connecting a watch

After enabling Bluetooth on the phone, open the “Devices” column under the “JYouPro” app on the phone, click to scan for devices, find the corresponding device, and click to connect, pair, and bind.

1. Before pairing, ensure that the watch’s battery level is above half to avoid the failure of pairing due to low battery levels
2. When pairing and connecting, please ensure that the distance between the phone and the watch does not exceed 10 meters, and keep the “JYouPro” application running in the background. Ensure that the phone Bluetooth is turned on, and the watch’s call audio and media audio are turned on
3. To turn off phone call audio and media audio, click on the phone icon to turn it on and off
4. If the watch is not connected to the mobile app for a long time or if the power is cut off for too long, there may be issues with inaccurate time and unsynchronized data, and it needs to be reconnected to the app
5. View the Bluetooth name of the watch, click on the Settings  unction button – System information – Information in the dropdown menu, and enter the information to view the Bluetooth name (model) of the watch

The symbol in the upper left corner shows: then the link is successful, if you see this symbol: , it means the connection is not successful. Please manually open the phone settings and connect to Bluetooth!

Simple explanation and display of commonly used functions

Dial selection: Long press and hold for 3 seconds on the main dial to enter dial mode, then slide left or right to select the dial, click to select, and exit viewing；
Physiological cycle monitoring: This function is only activated when gender selection is performed on the APP’s personal information
Menu function selection: Right slide on the main interface to enter the menu interface, and continuously click the side buttons to quickly change the menu style;
Add component: Select the corresponding functional component and click Select.
After returning, the component is successfully added;
Remove component: Long press 3S on the menu function to zoom out on the function menu. Click the remove button to remove it;
APP download: The QR code can be found in the watch settings menu – System Information – App, or by scanning the QR code in the manual;
Bluetooth call/Bluetooth music/voice assistant usage: To use these three functions, you need to pair and connect the watch with the mobile app “Jyoupro”, and also connect to the mobile Bluetooth.
By connecting two Bluetooth devices simultaneously, you can use the three functions mentioned above;
The main UI functions are displayed as follows:

Note

1. Do not disassemble, repair, or modify the product without authorization.
2. Do not violently collide with the product to avoid damage.
3. Please avoid using in strong magnetic fields, direct sunlight, or high temperature environments.
4. This product is not a professional medical device, and the measurement data is for reference only. It is not intended for disease diagnosis, treatment, or prevention purposes.
5. The waterproof grade of this product is IP67. Do not use it in saunas, hot springs, seawater, or other environments with corrosive liquids and hot steam. Avoid prolonged immersion in water, otherwise it may cause the product to crash

Q: Why can’t I wear my watch to take a hot bath?
The temperature of bath water is relatively high, and it generates a lot of water vapor. The small radius of the water vapor molecules makes it easy to penetrate through the cracks in the watch case. When the temperature drops, it will re-condense into liquid droplets.This can easily cause a short circuit in the watch’s internal circuitry, damaging the watch’s circuit board and eventually the watch.

Common problem handling
Watches cannot be turned on/charged

1. Please hold down the power button for more than 5 seconds
2. The battery may be too low. Please charge it in a timely manner. For the first use, please fully charge it for 2 hours to activate the battery
3. The magnetic contact of the watch is corroded by sweat. Please wipe the magnetic contact on the back of the watch clean with a cotton cloth or tissue before attempting to charge or replacing it with another charging head. If it still cannot be charged, please contact store customer service

Explanation of Bluetooth not connected or unable to connect operation

1. Please try restarting the watch and reconnecting.
2. Please try restarting your phone’s Bluetooth and connecting again.
3. Please confirm if your phone is connected to other Bluetooth devices. If so, please disconnect the other Bluetooth devices and reconnect.
4. After the watch is connected, it will go to sleep when not in use; When not automatically connected to the watch after hibernation, you need to open the mobile app “Jyoupro” and refresh it to automatically connect.
5. Uninstall the “Jyoupro” app, restore the watch to its factory settings, download the app again, and connect

Reminder and precautions for measuring heart rate/blood pressure/blood oxygen/exercise data

1. Please ensure that your personal information (age, height, weight) is filled in correctly in the “Jyoupro” app.
2. When taking a single measurement on a watch, please wear the watch at a finger-wide position below the wrist bone, snug but comfortable to wear on the wrist. Then remain still and breathe calmly. It requires more time to measure more accurate data. It is normal for heart rate data to be unstable at the beginning. If you measure more times and test for a longer period of time, you will find that the data will be more accurate.
3. This watch measures the steps using a built-in 3D gravity sensor, and the results are influenced by factors such as the user’s arm posture, stride length, body shape, road level or slope. But after multiple trials, the step data of our watch will not exceed 10% of the actual error. If the number of steps is less than 30, it may not be recorded

Insufficient accuracy of sleep data

1. Sleep monitoring simulates a person’s natural state of falling asleep and waking up, and requires normal wearing.
2. During the day, sleep data is not monitored, and the default sleep monitoring is from 9:00 pm to 11:00 am the next day.

Weather/time out of sync
When connecting the watch to the mobile app “Jyoupro”, it is also necessary to maintain the Bluetooth connection between the phone and the watch. At the same time, turn on the GPS positioning of the phone and keep the app running in the background. The watch will sync data such as weather, notification messages, exercise and health readings to JYouPro via Bluetooth and present them on the watch, which will not be presented after disconnecting or turning off the Bluetooth device.
The symbol in the upper left corner shows: then the link successful, if you see this symbol: , it means the connection i not successful. Please manually open the phone settings and connect to Bluetooth!

FAQ:

Q: After upgrading the app, the watch cannot be opened. What should I do?
– 1. Please ensure there is sufficient power
– 2. Do not exit the app during the upgrade process.
– 3. Ensure that the watch is connected to the Bluetooth of the phone.
– If the application is closed or the Bluetooth connection is disconnected during the upgrade process, the upgrade will fail and there may be situations such as not being able to power on. You can try recharging and reactivating the watch. After five minutes, the watch will return to the main interface
Q: Why does the watchautomatically disconnect the Bluetooth connection after the Android phone screen turns off?
– 1. Lock the backend app. After the JYouPro process is cleared, it will cause the watchto be disconnected from the phone.
– 2. Set the app to self start.
– 3. There are no restrictions on backend operation. Install an app on Android phones, which defaults to intelligent restrictions on background operation. You need to manually set the app without taking any restrictive measures
Q: Why can’t the watchreceive message push?
– 1. Confirm that the message push switch is enabled on the mobile app.
– 2. Confirm that the message can be displayed normally in the mobile notification bar, and push the watch message by reading the message in the mobile notification bar; If there is no message displayed in the mobile notification bar, the watchwill not be able to receive push notifications. (You need to find the notification settings in your phone settings and turn on the notification switches for WeChat, Facebook, Twitter, Phone, SMS, and mobile apps.).
– 3. Open your phone – Settings, enter notification management, and allow JYouPro to stay in notifications
Q: Why does the Bluetooth connection icon keep flashing?
– Users may encounter this issue, mainly to remind them that the app is not connected to the watchand may not receive message push notifications. Open the app to connect the bracelet, and the Bluetooth icon can be displayed normally.
Q: Why can’t I make and answer calls on my watch after connecting to my phone?
– 1. After the watch is connected to the phone through the APP, it also needs to be connected to the phone through Bluetooth.
– 2. When the watch is connected to the phone through the app for the first time, the app will prompt the watch to connect to the phone with Bluetooth. After that, it will not prompt to connect, and the user needs to manually connect the phone Bluetooth (connection method: phone settings – Bluetooth – find the phone model to connect)
– 3.APP Bluetooth is used for synchronizing messages and data, and audio Bluetooth (mobile Bluetooth) is used for calls and audio transmission. If you don’t need to transmit sound through your phone, you can disconnect the audio Bluetooth and only keep the application Bluetooth.
– If the audio Bluetooth is not connected, it will not respond.
– Please allow all permissions when connecting and keep the app running in the background. After connecting to audio Bluetooth, you can answer incoming calls.

For more graphic and video tutorial information, please scan the QR code below:

http://kaqila.wpbdy.cn/wp48/?p=59

Documents / Resources

| Hwagol B0BQR6RYPJ Smartwatch [pdf] User Guide
B0BRKKRRR9, B0BQR6RYPJ, B0BMGHP823, B0BQR71778, Smartwatch, B0BQR6RYPJ Smartwatch
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>