singing rock 1019 Full Body And Sit Harness For Special Forces User Guide
- June 15, 2024
- singing rock
Table of Contents
singing rock 1019 Full Body And Sit Harness For Special Forces
Product Information
| Product Name | TACTIC MASTER |
|---|---|
| Description | Full body and sit harness for special forces |
| Conformity Marking | EN 361:2002, EN 813:2008, EN 358:2018 |
| Maximum Load Capacity | 150 kg |
| Additional Standards | EN 795, EN 362, EN 354, EN 355 |
Product Usage Instructions
- Double buckle: Follow the steps marked as 1, 2, and 3 to secure the double buckle.
- Speed buckle: Follow the steps marked as 1, 2, and 3 to secure the speed buckle.
- Easy-Lock: Follow the steps marked as 1, 2, and 3 to lock the Easy-Lock feature.
- Imbus I allen key: Use a 4 mm allen key to tighten screws with a maximum torque of 6 Nm.
- A [cm/in] B [cm/in] C [cm/ft]: Measure and record the values for A, B, and C in centimeters or inches for reference.
- S, M/L, XL: Choose the appropriate size for the harness.
- Singing Rock Traceability Label: Check the label for the product’s unique identification number and manufacturing date.
- MRL = 150 kg EN XXX: The harness has a maximum recommended load capacity of 150 kg.
- Normativa Europea: The product conforms to European standards. Check the conformity marking and the number of the notified body for verification.
- Reading and understanding instruction for use are required to use this product safely.
For more information and updates, visit the official Singing Rock website at www.singingrock.com.
SINGING ROCK TRACEABILITY LABEL
- unique No.
- batch No.
- model
- size
- producer
- maximum rated load
- european standard
- conformity marking / no. of notified body shell carrying out conformity with type
Reading and understanding instruction for use are required to use this
product.
3-years guarantee.
Sit harness and belt for positioning
A. 361:2002
Use for fall arrest purposes. Component part of a fall-arrest system.
Marked with the letter A.
B. 813:2008
Use as sit harness. Sit harness alone is not suitable for fall arrest
purposes. During the use take appropriate working procedures to eliminate the
cause and effects of suspension trauma.
C. 358:2018
- Use as work positioning harness.
WARNING! Component part of a work positioning system – do not use as fall arrester if there is a foreseeable risk of the user becoming suspended or being exposed to unintended tension by the waist belt.
Buckle setting
Size measurement
Made of: PAD, PES, CrMo steel, aluminium alloy
Regulation (EU) 2016/425
Conformity assessment: VVUÚ, a.s., Pikartská 1337/7, 716 07 Ostrava-
RadvaniceCzech Republic, NB 1019
Conformity to type: VVUÚ, a.s., Pikartská 1337/7, 716 07 Ostrava-
Radvanice, Czech Republic, NB 1019
EU declaration of conformity available
on:www.singingrock.com
SINGING ROCK s.r.o.
Poniklá 317 • 514 01 Poniklá • Czech Republic
Tel. +420 481 585 007
email: info@singingrock.cz
www.singingrock.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>