FJ Dynamic FJD-FKIT Smart Controller Auto Steering Kit User Manual
- June 6, 2024
- FJ Dynamic
Table of Contents
FJD-FKIT Smart Controller Auto Steering Kit
User Manual
Copyright©2020 FJ Dynamics Technology Co., Ltd.
Declaration
All rights reserved.
Without an express written approval of FJ Dynamics Technology Co., Ltd., no
unit or individual shall counterfeit, copy, transcribe or translate all or
part of this manual, or
disseminate it in any manner (electronic, photocopied, recorded, etc.) for
profit.
This manual is for guidance only. The statement made herein shall not
constitute any form of warranty.
Foreword
Dear users, thank you for purchasing Fengjiang intelligent second generation,
remote controller. Please read this manual carefully before using it, and
understand and use
your intelligent remote controller step by step according to the instructions.
Introduction
The second-generation remote control adopts wifi high-definition picture
transmission technology, which can be used with robots and intelligent
agricultural machinery
supporting this picture transmission technology and transmitting high-
definition video pictures. With complete functional keys of the remote
control, the operation and
setting with robots and intelligent agricultural machinery can be completed
within the communication distance of up to 800M. The graph transmission system
uses 5.8G
communication frequency band.
Touch screen: The remote has a built-in 8.0-inch 800X1280P highlighted touch
screen.
Wireless connection mode: support 5.8G wifi connection to a robot or car
machine equipment.
Audio and video: The remote control has a built-in stereo speaker, which can
play audio and video.
Specifies the main hardware specifications
Operating frequency: 5.15ghz ~ 5.825ghz
Maximum effective signal range: 800M
Omnidirectional radiation power: 27DBm
Protocol: IEEE 802.11a/n
Battery capacity: 18650 lithium-ion battery (5000MA@7.4V) Charging mode: use
the 12V/1.67A 20W PD charger
Rated power consumption: 10W
Storage space: RAM 2G + ROM 8G Charging time: 2.5h
Maximum screen brightness: 500NIT
Operating temperature: -20℃ -40 ℃
Weight: Packing size: 412212 97mm
Basic operation
Power on and off
- Long press the power button for more than 2 seconds to open the remote control. If the power is insufficient, please charge the remote control.
- In the startup state, press the “on/off” button to switch between the working state and the hibernation state. In the hibernation state, the remote control will turn off the screen and enter the low-power mode.
- Long press the switch button for more than 2S to close the remote control.
Function is introduced
- Switch button
- the left joystick
- pause button
- menu
- Stop button
- right rocker
- A button
- Today button B
- Pet-name ruby display
- Attending indicator light
- wifi antenna
- buttons on
- presses
- Add buttons
- minus buttons
- Charging port
- Persons Shoulder buckle
- speaker
Product list
- Host
- The rocker
- Adapter and charging cable
- The shoulder straps
- Certificate of approval
WARNING
WARNING: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information:
FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the head with the minimum separation distance of 0mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
This product is in compliance to FCC RF Exposure requirements and refers to the FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2AZD3-FJW02YK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>