GXMO 2A7S6-GXAI GX55 Compact Mini PC User Manual

GXMO 2A7S6-GXAI GX55 Compact Mini PC

Product Information

This device complies with Part 15 of the FCC Rules, ensuring that it meets the regulatory standards set by the Federal Communications Commission (FCC). The device is designed to operate without causing any harmful interference and is capable of accepting any interference that it may receive, including interference that may cause undesired operation. Unauthorized changes or modifications to the device may void the user’s authority to operate the equipment.

The equipment must be installed and operated in accordance with the provided instructions to ensure FCC radiation exposure compliance. When using the transmitter, it is important to install the antenna(s) in a way that maintains a separation distance of at least 20 cm from all persons. The antenna(s) should not be co-located or operate in conjunction with any other antenna or transmitter. Both end-users and installers are required to follow the antenna installation instructions and transmitter operating conditions provided in order to satisfy RF (Radio Frequency) exposure guidelines.

Product Usage Instructions

1. Read the user manual carefully before operating the device.
2. Ensure that the device is installed and operated as per the provided instructions.
3. Keep a separation distance of at least 20 cm between the antenna(s) and all individuals when using the transmitter.
4. Do not co-locate or operate the antenna(s) in conjunction with any other antenna or transmitter.
5. Follow the antenna installation instructions and transmitter operating conditions provided to comply with RF exposure guidelines.
6. Any changes or modifications to the device that are not expressly approved by the responsible party for compliance may void the user’s authority to operate the equipment.

Basic Operation

Button & Ports

1. Power button
2. USB3.0 port
3. Type-C port
4. Headphone microphone jack
5. LAN port
6. USB2.0 port
7. HDMI port
8. DC in port

Front view:

1. on / off

2. Connect with USB peripheral device

3. Connect with Type-C cable

4. Connect with headphone microphone
   Back view:

5. Connect with ethernet cable

6. Connect with USB peripheral device

7. Connect with HDMI cable

8. Connect with adapter

A Fallure to use the induded power adapter may violate regulatory complance requirements and may expose the use safety hazards.
specifications are subject to the physical product.

FCC warning

FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure

Precautions for use
In order to continue to improve the user experience, we may occasionally update app and firmware.

• Do not use harsh of chemical solvent, cleaning products,We recommend using a soft cloth to wipe.
• Do not throw product into fire, avoid having fire accident.
• Do not attempt to open the housing or to repair, if a failure occurs, please contact the customer service.
• Please note seepage while clean electronics, be careful of electric shock.
• Check for any frayed or damaged cords or plugs.
• Don’t arbitrary discard the product, we should protect the environment.
• Work environment: 5°C-35°C, 30%-90% humidity.
• Storage environment: -20°C-60°C, 10%-90% humidity.

Shenzhen Guoruitong Technology Co., Ltd
ADD: Shenzhen Bao’an District West Township Avenue
Huafeng headquarters economic building D 329

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>