Avanti OR543U3S Outdoor Refrigerator Solid Door Instruction Manual
- October 27, 2023
- Avanti
Table of Contents
- Avanti OR543U3S Outdoor Refrigerator Solid Door
- APPLIANCE SAFETY
- IMPORTANT SAFEGUARDS
- PARTS AND FEATURES
- IMPORTANT SAFETY INSTRUCTIONS
- INSTALLATION INSTRUCTIONS
- Electrical Connection
- OPERATING YOUR APPLIANCE
- CARE AND MAINTENANCE
- TROUBLESHOOTING GUIDE
- YOUR AVANTI PRODUCTS WARRANTY
- Documents / Resources
Avanti OR543U3S Outdoor Refrigerator Solid Door
APPLIANCE SAFETY
- Your safety and the safety of others are very important.
- We have provided many important safety messages in this manual and on your appliance.
- Always read and obey all safety messages.
- This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others.
- All safety messages will follow the Safety Alert Symbol and either the wards” DANGER”, “WARNING” or “CAUTION”.
- Danger means that failure to heed this safety statement may result in severe personal injury or death.
- Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.
- Caution means that failure to heed this safety statement may result in minor or moderate personal injury, or property or equipment damage.
- All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not
- followed.
FLAMMABLE REFRIGERANT GAS
- DANGER – Risk of fire or explosion. Flammable refrigerant used. DO NOT use mechanical devices to defrost refrigerator. DO NOT puncture refrigerant tubing.
- DANGER – Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel. DO NOT puncture refrigerant tubing. CAUTION –
- Risk of fire or explosion. Flammable refrigerant used. Consult repair manual / owner’s guide before attempting to service this product. All safety precautions must be
- followed. CAUTION – Risk of fire or explosion. Dispose of property in accordance with federal or local regulations. Flammable refrigerant used. CAUTION – Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling instructions carefully. Flammable refrigerant used. CAUTION – To prevent a child from being entrapped, keep out of reach of children and not in the vicinity of the cooler.
IMPORTANT SAFEGUARDS
Before the unit is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the unit, follow basic precautions, including the following:
- Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord
- Replace all panels before operating
- It is recommended that a separate circuit, serving only your unit, be provided.
- Use receptacles that cannot be turned off by a switch or pull chain
- Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
- Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
- Do not connect or disconnect the electric plug when your hands are wet
- Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can result in electrical shock or death.
- Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this material. All other servicing should be referred to a qualified technician.
- Use two or more people to move and install the appliance. Failure to do so can result in back or other injury.
- To ensure proper ventilation for your appliance, the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 550F (130C) and below 900F (32 0C). This unit must be installed in an area protected from the elements, such as wind, rain, water spray or sunlight.
- The appliance should not be located next to ovens, grills or other sources of high heat. · The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required. · Do not kink or pinch the power supply cord of the appliance.
- The fuse (or circuit breaker) size should be 15 amperes.
- It is important for the appliance to be leveled in order to work properly. You may need to make several adjustments to level it.
- All installation must be in accordance with local plumbing code requirements.
- Make certain that the pipes are not pinched or kinked or damaged during installation.
- Check for leaks after connection.
- Never allow children to operate, play with or crawl inside the appliance
- Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or discolor the interior.
- Do not use this apparatus for other than its intended purpose.
HELP US HELP YOU.
- Write down the model and serial numbers.
- It is intended to help you operate and maintain your new appliance properly.
- You’ll find them on a plate located on the rear outside wall of the appliance.
- Keep it handy to answer your questions. If you don’t understand something or you need more help, please call:
- Avanti Customer Service 800-220-5570
- Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.
Please write these numbers here:
Date of Purchase
Model Number
Serial Number
- CAUTION: THIS APPLIANCE IS NOT DESIGNED FOR THE STORAGE OF MEDICINE OR OTHER MEDICAL PRODUCTS.
- Use these numbers in any correspondence or service calls concerning your appliance.
- If you received a damaged appliance, immediately contact the dealer (or builder) that sold you the appliance.
- Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.
IF YOU NEED SERVICE
We’re proud of our service and want you to NEXT, if you are still not
pleased, write all the be pleased. If for some reason, you are not details,
including your telephone number, and send happy with the service you receive,
here are it to: some steps to follow for further assistance.
Customer Service
Avanti Products
3265 Meridian Pkwy # 114
Weston, FL 33331 USA
PARTS AND FEATURES
OR543U3S / OR544U4G
1 | Control Panel |
---|---|
2 | Interior Fan |
3 | Shelves (3) |
4 | Light Switch |
5 | Leveling Legs |
6 | Front Grille |
7 | Door with Handle |
Model:
1 | Cabinet |
---|---|
2 | Upper Drawer with Handle |
3 | Security Lock |
4 | Lower Drawer with Handle |
5 | Front Grille |
6 | Leveling Legs |
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, or injury when using your refrigerator, This Unit Is Designed for Indoor and Outdoor Use follow these basic precautions:
SAVE THESE INSTRUCTIONS
- Read all instructions before using the refrigerator.
- DANGER or WARNING: Risk of child entrapment.
- Child entrapment and suffocation are not problems of the past.
- Junked or abandoned refrigerators are still dangerous . . . even if they will “just sit in the garage a few days”.
- Before you throw away your old refrigerator: take off the doors.
- Leave the shelves in place so that children may not easily climb inside.
- Never allow children to operate, play with, or crawl inside the refrigerator.
- Never clean refrigerator parts with flammable fluids. The fumes can create a fire hazard or explosion.
- Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other refrigerator. The fumes can create a fire hazard or explosion.
INSTALLATION INSTRUCTIONS
- Before Using Your Refrigerator
- Remove the exterior and interior packing.
- Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
- Clean the interior surface with lukewarm water using a soft cloth.
- Installation of Your Refrigerator
- This appliance is designed to be for free standing installation, recessed or built-in (fully recessed).
- Place your Appliance on a floor that is strong enough to support it when it is fully loaded. To level your Appliance, adjust the front leveling legs at the bottom of the Appliance.
- Locate the Appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
- Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.
- Plug the Appliance into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.
- Avoid locating the refrigerator in moist areas. Too much moisture in the air will cause frost to form quickly on the evaporator requiring more frequent defrosting of the refrigerator.
REVERSING THE DOOR SWING OF YOUR REFRIGERATOR
This unit has the capability of the doors opening from either the left or
right side. The unit is delivered to you with the doors opening from the left
side. Should you desire to reverse the opening direction, please call service
for reversal instructions.
BUILT IN CABINET INSTRUCTIONS
This unit is designed for both built-in or free standing installation. If you
plan to use this unit in a built- in application, please follow the
requirements shown to the right.
Cabinet Opening Dimensions
| IN (min)| CM (min)
Width| 25.75”| 65.5
Depth| 29”| 73.7
Height| 34 ½”| 87.7
ANTI-TIP BRACKET INSTALLATION
To reduce the risk of tipping the unit by abnormal usage or improper loading, the appliance must be secured by properly installing the anti-tip device packed with the appliance.
- Place the anti-tip bracket on the floor as shown in the figure. An anti-tip bracket must be installed at both sides.
- Mark the locations of the 4 holes of the anti-tip bracket on the floor, refer to the location drawing.
- Use a masonry drill bit and insert plastic anchors. · Secure bracket to floor using screws.
- Slide appliance into position and make sure the leg engages the anti-tip bracket.
NOTE: If the unit is relocated, the bracket must be removed and installed in the new location.
Electrical Connection
~ Warning
Improper use of the grounded plug can result in the risk of electrical shock.
If the power cord is damaged, have it replaced by an authorized Avanti
Products service center. This appliance should be properly grounded for your
safety. The power cord of this appliance is equipped with a three-prong plug
which mates with standard three prong wall outlets to minimize the possibility
of electrical shock. Do not under any circumstances cut or remove the third
ground prong from the power cord supplied. This appliance requires a standard
115Volts~/60Hz electrical outlet with three-prong ground. The cord should be
secured behind the appliance and not left exposed or dangling to prevent
accidental injury. Never unplug the appliance by pulling the power cord.
Always grip the plug firmly and pull straight out from the receptacle. Do not
use an extension cord with this appliance. If the power cord is too short,
have a qualified electrician or service technician install an outlet near the
appliance.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly
recommended that you do not use an extension cord with this unit. However, if
you must use an extension cord it is necessary that it be a UL/CUL-Listed,
3-wire grounding type appliance extension cord having a grounding type plug
and outlet and that the electrical rating of the cord be 115 volts and at
least 10 amperes.
SURGE PROTECTOR
Most electrical appliances use a series of electric control boards to operate.
These boards are very susceptible to power surges and could be damaged or
destroyed. If the appliance is going to be used in an area or if your city /
country is prone to power surges / outages; it is suggested that you use a
power surge protector for all electrical devices / appliances you use. The
surge protector that you select must have a surge block high enough to protect
the appliance it is connected to. If you have any questions regarding the type
and size of surge protector needed contact a licensed electrician in your
area. Damages due to power surges are not considered a manufacturer covered
defect and will void your product warranty.
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between 60- 90 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 34 – 50 degrees Fahrenheit may not be reached.
You can select temperature display setting from Fahrenheit to Celsius degree
by touching the button. Fahrenheit or Celsius degrees indicator will appear in
blue color in the temperature display window.
ON/OFF POWER
Press and hold for 2 seconds on control panel to turn on or turn off the
cooler, when cooler is turned off, the appliance will stop working.
LIGHT SETTING
There are two light modes, press and hold for 3 seconds to select light mode.
- Light on and off mode: The default setting of light will be controlled by
sensor when door is opened, the light will turn on automatically, when door is
closed the light will be turned off.
TEMPERATURE SETTING
Press the setting button to enter the setting mode.
Press or to adjust the temperature of the appliance, and each press on the button Will alter the temperature by 1°F
CARE AND MAINTENANCE
CLEANING YOUR APPLIANCE
- Turn off the power, unplug the appliance, and remove all items including shelves.
- Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.
- Wash the shelves with a mild detergent solution. · Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts. · Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth. · Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless steel with steel particles and rusting may occur.
POWER FAILURE
- Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.
MOVING YOUR APPLIANCE
- Remove all items. · Securely tape down all loose items (shelves) inside your appliance. · Tape the door shut. · Be sure the appliance stays secure in the upright position during transportation. Also protect outside of appliance with a blanket, or similar item.
ENERGY SAVING TIPS
- The appliance should be located in the coolest area of the room, away from heat producing appliances, and out of the direct sunlight.
PROBLEMS WITH YOUR APPLIANCE?
You can solve many common problems easily, saving you the cost of a
possible service call. Try the suggestions below to see if you can solve the
problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEM | POSSIBLE CAUSE |
---|---|
Appliance does not operate. | Not plugged in. |
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
Appliance is not cold enough.| Check the temperature control setting. External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off frequently.| The room temperature is hotter than normal. A large amount of contents has been added to the unit.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly. The door gasket does not seal properly.
The light does not work.| Not plugged in.
The circuit breaker tripped or a blown fuse. The light button is “OFF”.
Vibrations.| Check to assure that the appliance is level.
The appliance seems to make too much noise.| The rattling noise may come from
the flow of the refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your appliance.
Contraction and expansion of the inside walls may cause popping and crackling noises.
The appliance is not level.
The door will not close properly.| The appliance is not level. The gasket is dirty.
The shelves are out of position.
Display flashes Error message “H1”| Temperature sensor failure.
Contact the Avanti Service Department 1 – 800 – 220 – 5570
Display flashes Error message “L1”| Temperature sensor failure.
Contact the Avanti Service Department 1 – 800 – 220 – 5570
Display flashes Error message “F2”| Inner Fan Failure.
Contact the Avanti Service Department 1 – 800 – 220 – 5570
SERVICE FOR YOUR APPLIANCE
We are proud of our customer service organization and the network of
professional service technicians that provide service on your Avanti
appliances. With the purchase of your Avanti appliance, you can have the
confidence that if you ever need additional information or assistance, the
Avanti Products Customer Service team will be here for you. Just call us toll-
free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information 800-323-5029| Whatever your questions are about our
products, help is available.
---|---
Part Orders 800-220-5570| You may order parts and accessories that will be
delivered directly to your home by personal check, money order, Master Card, or Visa.
In-Home Repair Service 800-220- 5570| An Avanti Products authorized service center will provide expert repair service, scheduled at a time that is convenient for you. Our trained servicers
know your appliance inside and out.
YOUR AVANTI PRODUCTS WARRANTY
| Staple your sales receipt here. Proof of original purchase date is needed to
obtain service under warranty.
---|---
WHAT IS COVERED – LIMITED ONE-YEAR WARRANTY
Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless described in detail in the warranty document. For one year from the date of purchase by the original owner, Avanti products will, at its option, repair or replace any part of the product which proves to be defective in material or workmanship under normal use. Avanti Products will provide you with a reasonably similar product that is either new or factory refurbished. During this period Avanti Products will provide all parts and labor necessary to correct such defects free of charge, so long as the product has been installed and operated in accordance with the written instructions in this manual. In rental or commercial use, the warranty period is
90 days. All Avanti appliances of 4.2 cubic feet capacity or less must be brought/sent to the appliance service center for repair.
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY
For the second through the fifth year from the date of original purchase, Avanti Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Costs involved to move the product to the service center and back to the user’s home, as maybe required, are the
user’s responsibility.
WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:
The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti Products, including without limitation, one or more of the following:
· A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes, regulations, or laws, including failure to install the product in strict conformity with local fire and building codes and regulations.
· Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand, floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity,
lightning, power surges, structural failures surrounding the appliance, and acts of God.
· Content losses of food or other content due to spoilage.
· Incidental or consequential damages
· Parts and labor costs for the following will not be considered as warranty:
· Evaporator doors, door springs, and/or frames.
· Inner door panels, door shelves, door rails, and/or door supports.
· Light bulbs and/or plastic housing.
· Plastic cabinet liners.
· Punctured evaporator that voids the warranty on the complete sealed system.
| · Shipping and handling costs associated with the replacement of the unit.
· Repairs performed by unauthorized servicers.
· Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or any other acts of God.
· Failure of the product if it is used for other than it intended purpose.
· The warranty does not apply outside the Continental USA.
· Surcharges including but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls
to remote areas.
In no event, shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding property, including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also excluded from this warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces and exposed parts; Products on which the serial numbers have been altered, defaced or removed; service visits for customer education, or visits where there is nothing wrong with the product; correction of installation problems (you are solely responsible for any structure and setting for the product, including all
electrical, plumbing and/or other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation cabinetry, walls, floors, shelving etc., as well as the resetting of breakers or fuses.
OUT OF WARRANTY PRODUCT
Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including repairs, pro-rates, or product replacement, once this warranty has expired.
WARRANTY – REFRIGERATION – COMPRESSOR
Documents / Resources
|
Avanti OR543U3S Outdoor Refrigerator Solid
Door
[pdf] Instruction Manual
OR543U3S Outdoor Refrigerator Solid Door, OR543U3S, Outdoor Refrigerator Solid
Door, Refrigerator Solid Door, Solid Door
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>