NUX Reissue Series Analog Chorus Guitar Effect Pedal Owner’s Manual

NUX Reissue Series Analog Chorus Guitar Effect Pedal

The NUX ANALOG CHORUS pedal from the Reissue Series brings back the legendary chorus sound from the BO’s, when most guitar tracks had Chorus effect. Thanks to its pure analog Bucket-Brigade circuit, the NUX ANALOGCHORUS pedal offers you authentic Chorus effects from warm subtle shimmer to near-vibrato wobbles.

Overview

• Vintage Analog Chorus Effect
• Pure Analog Bucket-Brigade Circuit
• True-bypass Hardware Switching

Specifications

• Input impedance: 1 M Ohms
• Output impedance: 1 OK Ohms
• Power: 9V battery or external AC adaptor delivering 9V DC regulated minimum 300mA ( G–e)-03 )
• Dimensions: 121 (L) X 77/Y’J) X 48(D) mm
• Weight: 230g

1. Do not place near heat sources, such as radiators, heat registers, or appliances which produce heat.
2. Guard against objects or liquids entering the enclosure.
3. Refer all servicing to qualified service personnel.
4. Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to practice “safe listening”.

Follow all instructions and heed all warnings KEEP THESE INSTRUCTIONS!

Product Interface

1. POWER Jack
   Use a regulated 9V DC adapter with Negative Tip to power this pedal. It’s highly recommended using the optional NUX ACD-006A adaptor. Using an incompatible adaptor may cause noise or mal-function.

2. WIDTH Knob
   Controls the sweeping range of the Chorus.

3. BLEND Knob
   Adjusts the balance of dry signal and the effected signal.

4. SPEED Knob
   Controls the sweeping speed of the Chorus.

5. OUTPUT Jack
   Connect an amplifier into this jack.

6. INPUT Jack
   Connect your guitar into this jack. Plugging in this jack switch on the power whether the effect is engaged or bypassed. When not using this pedal, disconnect the cable from this jack to save battery life.

7. ON/OFF Switch
   Turns On/Off the effect

Installing The Battery

A battery is supplied with the unit. Connect the snap cord to the battery and insert the battery as shown in the drawing. When the battery runs down the sound will change. In such case please replace with new battery. The power comes on when you insert the plug into the INPUT jack. The use of an AC adaptor is recommended as the unit’s power consumption is relatively high.

Accessories

• 9V battery
• Owner’s manual
• Warranty card

specifications and features are subject to change without notice.
WARNING!- IMPORTANT SAFETY INSTRUCTIONS BEFORE CONNECTING, READ INSTRUCTIONS
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : To reduce the risk of fire or electric shock, do not remove screws. No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning symbol within a triangle means “electrical caution!” It indicates the presence of information about operating voltage and potential risks of electrical shock.

CE mark for European Harmonized Standards

CE Mark which is attached to our company’s products of Battery mains the product is in fully conformity with the harmonized standard(s) EN 61000-6-3:2007+A1:2011 & EN 61000-6-1:2007 Under the Council Directive 2004/108/EC on Electromagnetic Compatibility.
www.nuxefx.com
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>