NUX NBT-1 Bluetooth Audio and Midi Adaptor Instructions
- May 15, 2024
- NUX
Table of Contents
NUX NBT-1 Bluetooth Audio and Midi Adaptor
Important Information
Before using this unit, carefully read “IMPORTANT NOTES.” After reading, keep the document(s) where it will be available for immediate reference.
Bluetooth Connection
- Plug NBT-1 into the USB-C port of your device and power on the device.
- Enter the “Settings” ofyourphoneortablet,andfindthe”BluetoothSettings”oplion.
- Tumon “Bluetooth Setting”,findthedevicethatneedstobeconnectedwithinthedevicelistthen click”corv1ect”.
Main specifications
Absolute Maximum Ratings
Parameter| Symbol| Min| Max| Unit
Temperature| storage temperature (Tstg)| -55| +150| C
Temperature| Operating Temperature| -10| +60| C
ESDS1ressvottage| VESD (Human body model)| 4000| –| V
Supply Voltaae| USB-C| 4.5| 5.5| V
Input Voltage| 3.3VI0| 3.1| 3.5| V
Indicator| Pairing indicator
---|---
Communication standard| Bluetoo1hVer.5.3
Frequencyspectrum:2.4GHz
Connector| USB-C
Power Supply| Supp 6ed From The Connected Product
Dimensions| 32(W)x21(D)x16(H)mm
Important Notes
Placement
This unit may interfere with radio and television reception. Do not use this
unit in the vicinity of such receivers.
Noise may be produced if wireless communications devices, such as cell phones,
are operated in the vicinity of this unit. Such noise could occur when
receiving or initiating a call, or while conversing. Should you experience
such problems, you should relocate such wireless devices so they are at a
greater distance from this unit, or switch them off.
When moved from one location to another where the temperature and/or humidity
is very different, water droplets (condensation) may form inside the unit.
Damage or malfunction may result if you attempt to use the unit in this
condition. Therefore, before using the unit, you must allow it to stand for
several hours, until the condensation has completely evaporated.
Do not place containers or anything else containing liquid on top of this
unit. Also, whenever any liquid has been spilled on the surface of this unit,
be sure to promptly wipe it away using a soft, dry cloth.
Maintenance
Never use benzine, thinners, alcohol or solvents of any kind, to avoid the
possibility of discoloration and/or deformation.
Caution Regarding Radio Frequency Emissions
The following actions may subject you to penalty of law.
Disassembling or modifying this device.
Removing the certification label affixed to the back of this device.
Do not use this product closer than 22 cm (8-11 /16 inches) from where a
cardiac pacemaker is implanted. Doing so may affect the operation of the
cardiac pacemaker.
Additional Precautions
The parts on the NBT-1 may be damaged if exposed to static electricity.
Observe the following precautions when handling the NBT-1.
Before picking up the NBT-1, touch another metallic object to discharge the
static electricity in your body or clothes.
Hold the NBT-1 by touching the edges of the NBT-1, making sure that your hands
do not come into direct contact with the parts or connectors.
Do not touch any of the printed circuit pathways or connection terminals.
Do not forcibly push the NBT-1 into place. If you have trouble attaching it,
remove the NBT-1 completely and then try again.
When circuit board installation is complete, double-check your work.
This document explains the specifications of the product at the time that the
document was issued. For the latest information, refer to the NUX website.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.