tp-link ER706W Omada AC1350 Gigabit VPN Router Installation Guide

tp-link ER706W Omada AC1350 Gigabit VPN Router

Product Information

The product is a Wi-Fi Router manufactured by TP-Link. It is available in two models

• Omada AX3000 Gigabit VPN Router (Model Number: ER706W)
• Omada AC1350 Gigabit VPN Router (Model Number: ER605W)

Regulatory Compliance
FCC Compliance Information Statement

• Product Name : Omada AX3000 Gigabit VPN Router/Omada AC1350 Gigabit VPN Router
• Model Number : ER706W/ER605W
• Responsible Party : TP-Link USA Corporation
• Address : 10 Mauchly, Irvine, CA 92618
• Website : https://www.tp-link.com/us/
• Tel : +1 626 333 0234
• Fax: +1 909 527 6804
• E-mail : [email protected]

This device complies with part 15 of the FCC Rules. It operates under the following conditions

1. The device may not cause harmful interference.
2. The device must accept any interference received, including interference that may cause undesired operation.

Any unauthorized changes or modifications to the device may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications.

FCC RF Radiation Exposure Statement
The device and its antenna must not be co-located or operate in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antennas and all persons. The antennas should not be co-located or operate with any other antenna or transmitter.

CE Mark Warning
This product is classified as Class B. In a domestic environment, it may cause radio interference, and the user may be required to take adequate measures.

Product Usage Instructions

Installation

1. Select a suitable location for the router.
2. Connect the router to the power supply using the provided I.T.E. power supply.
3. Connect the router to your modem using an Ethernet cable.
4. Power on the router.

Configuration

1. Access the router’s web interface by entering its IP address in a web browser (e.g., 192.168.0.1).
2. Follow the on-screen instructions to set up your network preferences, including Wi-Fi settings, security options, and password.
3. Save the configuration settings and restart the router.

Usage
Once the router is configured, it will provide wireless internet access to connected devices. Connect your devices to the router’s Wi-Fi network using the provided network name (SSID) and password.

Specifications

• Operating Frequency: [Insert frequency]
• Maximum Transmitted Power : [Insert power]

Frequently Asked Questions (FAQ)

• Q: How can I reset the router to its factory settings?
  A: To reset the router, locate the reset button on the device and press and hold it for about 10 seconds. This will restore the router to its default settings.

• Q: Can I connect multiple devices to the router?
  A: Yes, the router supports multiple device connections. You can connect smartphones, laptops, tablets, and other Wi-Fi enabled devices to the router.

FCC compliance information statement

• Product Name: Omada AX3000 Gigabit VPN Router/Omada AC1350 Gigabit VPN Router
• Model Number : ER706W/ER605W

Responsible party
TP-Link USA Corporation

• Address : 10 Mauchly, Irvine, CA 92618
• Website : https://www.tp-link.com/us/
• Tel : +1 626 333 0234
• Fax : +1 909 527 6804
• E-mail : [email protected]

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

• This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
• “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
• We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2023.07.17

FCC compliance information statement

• Product Name : I.T.E. Power Supply
• Model Number: T120200-2B1/T120100-2B1 Responsible party:
• TP-Link USA Corporation
• Address: 10 Mauchly, Irvine, CA 92618
• Website : https://www.tp-link.com/us/
• Tel : +1 626 333 0234
• Fax : +1 909 527 6804
• E-mail : [email protected]

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
   Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY (the maximum transmitted power)

• 2400 MHz -2483.5 MHz(20dBm)
• 5150 MHz -5250 MHz(23dBm)
• 5250 MHz -5350 MHz (23dBm)
• 5470 MHz -5725 MHz (25.95dBm)

EU declaration of conformity

• TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
• The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce

RF Exposure Information

• This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
• The device complies with RF specifications when the device used at 20 cm from your body.
  • Frequency band: 5150 – 5250 MHz
  • Indoor use : Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.
  • Frequency band : 5250 – 5350 MHz:
  • Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.
  • Frequency band : 5470 – 5725 MHz
    Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.

National restrictions UKCA Mark

UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tp- link.com/support/ukca

National Restrictions

Attention: This device may only be used indoors in Great Britain.

Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

For ER706W
This radio transmitter (IC: 26583-ER706W/ Model: ER706W) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list below, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Antenna

• Three 5GHz 2dBi dual-band detachable antennas
• Two 2.4GHz 1dBi dual-band detachable antennas

Caution

1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
3. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and
   DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.

Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

• Industry Canada Statement
• CAN ICES-3 (B)/NMB-3(B)

C1O2m00adGaigAaXb3it0V0P0NGiRgoaubtiterVPN Route ER706W/ER605W Equipment name Type designation (Type)

Ｕnit| Restricted  symbols substances and its chemic

Lead (Pb)

○

| Mercury (Hg)

○

| Cadmium (Cd)

○

| chromium

(Cr+6)

○

| biphenyls

(PBB)

○

| diph(ePnByDl eEt)hers

○

PCB| ○| ○| ○| ○| ○| ○
| −| ○| ○| ○| ○| ○
| | | | | |
| ○| ○| ○| ○| ○| ○
Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2: “O” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3: The – indicates that the restricted substance corresponds to the exemption.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
• Operating Temperature: 0℃ ~ 40℃ (32℉ ~ 104℉)
• This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanations of the symbols on the product label

Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.

References

• Link: Simple, secure one-click payments
• Regulatory Compliance | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>