Kanlux 08822 Rolf Mini JQ L Infrared or Microwave Internal Light Movement Sensor Instruction Manual
- June 4, 2024
- Kanlux
Table of Contents
2021/10-1
A3-297x420mm/ISO216
www.kanlux.com
ROLF MINI JQ-L
INTENDED USE / APPLICATION
Product designed for use in households and for other similar general
applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Mounting diagram: see pictures. Do not exceed the maximum load power of the sensor: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network that meets energy quality standards as prescribed by law.
FUNCTIONAL CHARACTERISTICS
Product for indoor use. The product automatically lights up when moving objects are detected. Product offers the possibility of adjusting operation time (TIME) and frequency (NIGHT/DAY).
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be done when the product is disconnected from the power supply. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. The product must not be used in unfavorable environments, e.g. dust, moisture, water, vibrations, etc. Mount the product far from heat sources. The product is compatible with LEDs or LED light bulbs. The product is also compatible with fluorescent lamps, and their wear may depend on the type of the lamp. Moving objects (e.g. vehicles) may cause random activation of the sensor. In the area of strong electromagnetic interference, the functioning of the product may be disrupted. Product not appropriate for industrial purposes.
EXPLANATIONS OF SYMBOLS USED
P1: Rated voltage, frequency.
P2: Total maximum load power.
P3: Product meets the requirements of EU directives.
P4: Protection against solid foreign objects bigger than 12mm provided.
P5: Class II. A product in which protection against electric shock is provided
not only through basic insulation, but also double or reinforced insulation.
P6: Use only indoors.
P7: Micro-gap between transmitter contacts.
P8: This symbol means that the product can be installed and operated/on a
surface made of materials that are normally flammable.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended.
P9: This labeling indicates the requirement to selectively collect waste
electronic and electrical equipment. Products labeled in this way must not be
disposed of in the same way as other waste under the threat of a fine. These
products may be harmful to the natural environment and health and require a
special form of recycling / neutralizing.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical
shock, physical injury, and other material and non-material damage. For more
information about Kanlux products visit
www.kanlux.com
Kanlux SA shall not be responsible for any damage resulting from the failure
to follow these instructions. CE declaration of compliance: We, Kanlux SA,
hereby declare the product is compliant with the basic requirements and other
respective provisions of Directive 2014/53/EU. The declaration of compliance
is available in electronic form on the company’s website:
www.kanlux.com.
