panacom SP-1810A Monsoon Tower Portable Speaker User Manual
- June 6, 2024
- panacom
Table of Contents
panacom SP-1810A Monsoon Tower Portable Speaker User Manual
SP-1810A MONSOON TOWER PORTABLE SPEAKER
User’s Guide
Thank you for purchasing Panacom’s SP-1810A.
Please read the manual carefully before operating.
PRECAUTIONS
In order to prevent operating problems or serious damage to the device, please comply with the following remarks.
- Hold the electric outlet while pulling out the plug. Do not pull the wire.
- Operating audio appliances should be kept away from heating sources.
- Do not attempt to fix or revise the circuits.
- Do not touch the internal parts, otherwise electric shock or serious damage might occur.
- Place this speaker in a ventilated dry condition with about 20mm of space around other surfaces for heat dispersion.
WARNING: Do not expose this appliance to rain or moisture or liquids.
SPECIFICATIONS
– BT Connection
– TWS-True Wireless Stereo
– FM Radio
– Remote Control
– 2 Mic inputs
– Led Display Screen
– USB/SD Card slot
– Equalizer
– X-Bass volume control
– Frequency response: 40Hz-20KHz
– Impedance: 4
– Sensitivity: 93dB+3dB
FRONT PANEL FUNCTIONS
- MODE : Choose the desired input USB/SD/Line/BT
- NEXT : Play next track
- PREV : Play previous track
- Equalizer : Move to adjust to your desired sound
- USB port
- SD card port
- Mic BASS : Move to increase or decrease BASS
- Mic TREBLE : Move to increase or decrease TREBLE
- M. Volume : Move to increase or decrease Mics volume
- X-BASS : Move to increase or decrease extra BASS
- Led Display
- Power Switch: Press to turn ON or OFF the speaker
- Mic 1 & Mic 2: Connect the Mics in these outlets
- Mic Delay : Move to increase or decrease Mics delay
- Mic Echo : Move to increase or decrease Mics echo
- Master Volume : Move to increase or decrease Master volume
REMOTE CONTROL FUNCTIONS
BT CONNECTION PAIRING
Press the MODE button until the word “BLUE” appears in the Led display.
The BT connection blue light will blink and the speaker will give an alarm.
Ensure you enable the BT Function in your device, search for the SP1810A model
in the list of your device and select it.
BACK PANEL CONNECTIONS
TWS CONNECTION (TRUE WIRELESS STEREO)
STEP 1 Push the Mode Button on both speakers until speakers are in BT Mode. Screen will display the word “ BLUE ”.
STEP 2 When both speakers are in BT mode, push and hold the TWS button for 3 seconds. You will hear a beep & screen display “bt/btst”. Next time you put both speakers in BT mode at the same time, speakers will connect automatically.
STEP 3 On your device, turn your BT settings “ON”, you will then select the unit and pair. Enjoy TWS (True Wireless Stereo) sound from your phone via BT!
INTERNATIONAL WARRANTY
Terms and Conditions
- Panacom warrants the operation of this product to be free from any manufacturing and/or material defect for a period of 6 months from the date of purchase by the user.
- This warranty is limited to the repair and/or replacement of this product, according to our own criterion, free of charge within the stipulated term and it does not extend to consequential or incidental damages to other products that may be used with this unit.
- The warranty shall be voided in the following cases: a) repair or attempt to repair by third parties not authorized by the company. b) in case of performing any type of cut in connection cables, plugs, connectors, or other adapters different from the original ones provided by the company.
- To make this warranty effective, you shall contact the Authorized Service Center of your country and they shall carry out the pertinent procedure. In order to start the necessary procedure to get said warranty, you shall hand in the Original Purchase Invoice where the purchase date, dealer name and product identification shall be stated clearly.
- Transportation, freight, stay and/or insurance expenses, if any, are not covered by this warranty
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
